Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017, Article ID 3627251, 7 pages
https://doi.org/10.1155/2017/3627251
Research Article

Time-Dependent Behavior of Shrinkage Strain for Early Age Concrete Affected by Temperature Variation

1School of Civil Engineering, Chongqing Jiaotong University, Chongqing 400074, China
2CREEC (Chongqing) Survey, Design and Research Co. Ltd, Chongqing 400023, China
3Pavement Engineering Center, Technical University of Braunschweig, 38106 Braunschweig, Germany

Correspondence should be addressed to Weina Wang; ten.haey@6180nww

Received 12 August 2016; Revised 12 January 2017; Accepted 1 February 2017; Published 29 March 2017

Academic Editor: Charles C. Sorrell

Copyright © 2017 Yu Qin et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. Collepardi, A. Borsoi, S. Collepardi, J. J. Ogoumah Olagot, and R. Troli, “Effects of shrinkage reducing admixture in shrinkage compensating concrete under non-wet curing conditions,” Cement and Concrete Composites, vol. 27, no. 6, pp. 704–708, 2005. View at Publisher · View at Google Scholar · View at Scopus
  2. I. Maruyama and A. Teramoto, “Temperature dependence of autogenous shrinkage of silica fume cement pastes with a very low water-binder ratio,” Cement and Concrete Research, vol. 50, no. 3, pp. 41–50, 2013. View at Publisher · View at Google Scholar · View at Scopus
  3. C. Jiang, Y. Yang, Y. Wang, Y. Zhou, and C. Ma, “Autogenous shrinkage of high performance concrete containing mineral admixtures under different curing temperatures,” Construction and Building Materials, vol. 61, pp. 260–269, 2014. View at Publisher · View at Google Scholar · View at Scopus
  4. A. Bideci, Ö. S. Bideci, S. Oymael, and H. Yıldırım, “Analysis of shrinkage and creep behaviors in polymer-coated lightweight concretes,” Science and Engineering of Composite Materials, vol. 23, no. 1, pp. 77–83, 2016. View at Publisher · View at Google Scholar · View at Scopus
  5. D. W. Hobbs, “Influence of specimen geometry upon weight change and shrinkage of air-dried concrete specimens,” Magazine of Concrete Research, vol. 29, no. 99, pp. 70–80, 1977. View at Publisher · View at Google Scholar · View at Scopus
  6. J. M. Terrill, M. Richardson, and A. R. Selby, “Non-linear moisture profiles and shrinkage in concrete members,” Magazine of Concrete Research, vol. 38, no. 137, pp. 220–225, 1986. View at Publisher · View at Google Scholar · View at Scopus
  7. P. Lura, K. Van Breugel, and I. Maruyama, “Effect of curing temperature and type of cement on early-age shrinkage of high-performance concrete,” Cement and Concrete Research, vol. 31, no. 12, pp. 1867–1872, 2001. View at Publisher · View at Google Scholar · View at Scopus
  8. A. C. L. Wong, P. A. Childs, R. Berndt, T. Macken, G.-D. Peng, and N. Gowripalan, “Simultaneous measurement of shrinkage and temperature of reactive powder concrete at early-age using fibre Bragg grating sensors,” Cement and Concrete Composites, vol. 29, no. 6, pp. 490–497, 2007. View at Publisher · View at Google Scholar · View at Scopus
  9. H. Kim and D. G. Goulias, “Shrinkage behavior of sustainable concrete with crushed returned concrete aggregate,” Journal of Materials in Civil Engineering, vol. 27, no. 7, Article ID 04014204, 2015. View at Publisher · View at Google Scholar · View at Scopus
  10. P.-C. Aitcin, A. M. Neville, and P. Acker, “Integrated view of shrinkage deformation,” Concrete International, vol. 19, no. 9, pp. 35–41, 1997. View at Google Scholar · View at Scopus
  11. J. Saliba, E. Rozière, F. Grondin, and A. Loukili, “Influence of shrinkage-reducing admixtures on plastic and long-term shrinkage,” Cement and Concrete Composites, vol. 33, no. 2, pp. 209–217, 2011. View at Publisher · View at Google Scholar · View at Scopus
  12. M. S. Meddah and R. Sato, “Effect of curing methods on autogenous shrinkage and self-induced stress of high-performance concrete,” ACI Materials Journal, vol. 107, no. 1, pp. 65–74, 2010. View at Google Scholar · View at Scopus
  13. W. Zhang and W. Sun, “Effect of coarse aggregate on early age autogenous shrinkage of high-performance concrete,” Journal of the Chinese Ceramic Society, vol. 37, no. 4, pp. 631–636, 2009. View at Google Scholar · View at Scopus
  14. Z. P. Bazant and S. T. Wu, “Creep and shrinkage law for concrete at variable humidity,” Journal of the Engineering Mechanics Division, vol. 100, no. 6, pp. 1183–1209, 1974. View at Google Scholar · View at Scopus
  15. J. J. Brooks, “Influence of mix proportions, plasticizers and superplasticizers on creep and drying shrinkage of concrete,” Magazine of Concrete Research, vol. 41, no. 148, pp. 145–153, 1989. View at Publisher · View at Google Scholar · View at Scopus
  16. T. Bakharev, J. G. Sanjayan, and Y.-B. Cheng, “Effect of elevated temperature curing on properties of alkali-activated slag concrete,” Cement and Concrete Research, vol. 29, no. 10, pp. 1619–1625, 1999. View at Publisher · View at Google Scholar · View at Scopus
  17. H. Nassif, N. Suksawang, and M. Mohammed, “Effect of curing methods on early-age and drying shrinkage of high-performance concrete,” Transportation Research Record, no. 1834, pp. 48–58, 2003. View at Google Scholar · View at Scopus
  18. M. J. Oliveira, A. B. Ribeiro, and F. G. Branco, “Curing effect in the shrinkage of a lower strength self-compacting concrete,” Construction and Building Materials, vol. 93, pp. 1206–1215, 2015. View at Publisher · View at Google Scholar · View at Scopus
  19. L. Wang, X. Xie, and W. Su, “Changes of maximum and minimum temperature and their impacts in Northern China over the second half of the 20th century,” Journal of Natural Resources, vol. 19, no. 3, pp. 337–343, 2004. View at Google Scholar
  20. Z. Guo, Q. Miao, and X. Li, “Change characteristics of temperature in North China since recent 50 years,” Arid Land Geography, vol. 28, no. 2, pp. 176–182, 2005. View at Google Scholar
  21. GB Code for Design of Concrete Structures, GB 50010-2010, China Building Industry Press, Beijing, China, 2010.
  22. JTG, “Code for design of highway reinforced concrete and prestressed concrete bridges and culverts,” JTG D62-2004, China Communications Press, Beijing, China, 2004. View at Google Scholar
  23. American Concrete Institute Committee 209, Prediction of Creep, Shrinkage, and Temperature Effects in Concrete Structure, Reapproved 1997, ACI, Farmington Hills, Mich, USA, 1997.
  24. Z. P. Bazant and S. Baweja, Creep and Shrinkage Prediction Model for Analysis and Design of Concrete Structure: Model B3, ACI Committee, Michigan, Mich, USA, 1995.
  25. J. Jasiczak, P. Szymański, and P. Nowotarski, “Wider perspective of testing early shrinkage of concrete modified with admixtures in changeable W/C ratio as innovative solution in civil engineering,” Procedia Engineering, vol. 122, pp. 310–319, 2015. View at Google Scholar
  26. J. Zhang, Y. D. Han, and Y. Gao, “Effects of water-binder ratio and coarse aggregate content on interior humidity, autogenous shrinkage, and drying shrinkage of concrete,” Journal of Materials in Civil Engineering, vol. 26, no. 1, pp. 184–189, 2014. View at Publisher · View at Google Scholar · View at Scopus
  27. D. P. Bentz and M. A. Peltz, “Reducing thermal and autogenous shrinkage contributions to early-age cracking,” ACI Materials Journal, vol. 105, no. 4, pp. 414–420, 2008. View at Google Scholar · View at Scopus
  28. D. Saje, Compressive strength and shrinkage of high strength concrete [Ph.D. thesis], University of Ljubljana, 2001.
  29. P. Kumar Mehta and J. M. Paulo, Concrete: Microstructure, Properties, and Materials, McGraw-Hill, New York, NY, USA, 3rd edition, 2006.
  30. T. Aly and J. G. Sanjayan, “Mechanism of early age shrinkage of concretes,” Materials and Structures, vol. 42, no. 4, pp. 461–468, 2009. View at Publisher · View at Google Scholar · View at Scopus
  31. B. Zhu, Thermal Stresses and Temperature Control of Mass Concrete, China Electric Power Press, 1999.
  32. D. Saje, “Reduction of the early autogenous shrinkage of high strength concrete,” Advances in Materials Science and Engineering, vol. 2015, Article ID 310641, 8 pages, 2015. View at Publisher · View at Google Scholar · View at Scopus
  33. J. Zhang, H. Dongwei, and S. Wei, “Experimental study on the relationship between shrinkage and interior humidity of concrete at early age,” Magazine of Concrete Research, vol. 62, no. 3, pp. 191–199, 2010. View at Publisher · View at Google Scholar · View at Scopus
  34. G. Wischers and J. Dahms, “Kriechen von Fruehbelastetem Beton mit Hoher Anfangsfestigkeit,” in Betontechnische Berichte, pp. 29–54, 1977. View at Google Scholar
  35. N. Han and J. C. Walraven, “Creep and shrinkage of high-strength concrete at early and normal ages,” in Proceedings of the 2nd CANMET/ACI International Symposium, vol. ACI SP 154-5 of Advances in Concrete Technology, pp. 73–94, Las Vigas, Ariz, USA, 1995.
  36. K. M. Lee, H. K. Lee, S. H. Lee, and G. Y. Kim, “Autogenous shrinkage of concrete containing granulated blast-furnace slag,” Cement and Concrete Research, vol. 36, no. 7, pp. 1279–1285, 2006. View at Publisher · View at Google Scholar · View at Scopus
  37. D. Shen, J. Jiang, J. Shen, P. Yao, and G. Jiang, “Influence of curing temperature on autogenous shrinkage and cracking resistance of high-performance concrete at an early age,” Construction and Building Materials, vol. 103, pp. 67–76, 2016. View at Publisher · View at Google Scholar · View at Scopus
  38. P. Lura, Autogenous deformation and internal curing of concrete [Ph.D. thesis], Delft University of Technology, Delft, The Netherlands, 2003.