Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017 (2017), Article ID 3679323, 8 pages
https://doi.org/10.1155/2017/3679323
Research Article

Deformation Characteristics of Ultrahigh-Strength Concrete under Unrestrained and Restrained States

1Department of Civil Engineering, The University of Suwon, 17 Wauan-gil, Bongdam-eup, Hwaseong-si, Gyeonggi-do 18323, Republic of Korea
2Department of Architectural Engineering, Hanyang University, 222 Wangsimni-ro, Seongdong-gu, Seoul 04763, Republic of Korea
3Department of Civil Engineering, Chungnam National University, 99 Daehak-ro, Yuseong-gu, Daejeon 34134, Republic of Korea

Correspondence should be addressed to Nam-Hyoung Lim; rk.ca.unc@mirhn

Received 6 March 2017; Accepted 14 May 2017; Published 5 July 2017

Academic Editor: Xiao-Yong Wang

Copyright © 2017 Joo-Ha Lee et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. B. Hossain and J. Weiss, “The role of specimen geometry and boundary conditions on stress development and cracking in the restrained ring test,” Cement and Concrete Research, vol. 36, no. 1, pp. 189–199, 2006. View at Publisher · View at Google Scholar · View at Scopus
  2. S. H. Kwon, R. P. Ferron, Y. Akkaya, and S. P. Shah, “Cracking of fiber-reinforced self-compacting concrete due to restrained shrinkage,” International Journal of Concrete Structures and Materials, vol. 1, no. 1, pp. 3–9, 2007. View at Publisher · View at Google Scholar
  3. K. Kovler and S. Zhutovsky, “Overview and future trends of shrinkage research,” Materials and Structures, vol. 39, no. 293, pp. 827–847, 2006. View at Publisher · View at Google Scholar · View at Scopus
  4. K. Wiegrink, S. Marikunte, and S. P. Shah, “Shrinkage cracking of high-strength concrete,” ACI Materials Journal, vol. 93, no. 5, pp. 409–415, 1996. View at Google Scholar · View at Scopus
  5. K. M. Lee, H. K. Lee, S. H. Lee, and G. Y. Kim, “Autogenous shrinkage of concrete containing granulated blast-furnace slag,” Cement and Concrete Research, vol. 36, no. 7, pp. 1279–1285, 2006. View at Publisher · View at Google Scholar · View at Scopus
  6. S.-I. Igarashi, A. Bentur, and K. Kovler, “Autogenous shrinkage and induced restraining stresses in high-strength concretes,” Cement and Concrete Research, vol. 30, no. 11, pp. 1701–1707, 2000. View at Publisher · View at Google Scholar · View at Scopus
  7. S. G. Park, T. Noguchi, and M. H. Kim, “A study on the creep and autogenous shrinkage of high performance concrete with expansive additive and shrinkage reducing admixtures at early age,” International Journal of Concrete Structures and Materials, vol. 18, no. 2E, pp. 73–77, 2006. View at Publisher · View at Google Scholar
  8. P. Chindaprasirt, S. Homwuttiwong, and V. Sirivivatnanon, “Influence of fly ash fineness on strength, drying shrinkage and sulfate resistance of blended cement mortar,” Cement and Concrete Research, vol. 34, no. 7, pp. 1087–1092, 2004. View at Publisher · View at Google Scholar · View at Scopus
  9. J. Weiss, W. Yang, and P. S. Surendra, “Influence of specimen size/geometry on shrinkage cracking of rings,” Journal of Engineering Mechanics, vol. 126, no. 1, pp. 93–101, 2000. View at Publisher · View at Google Scholar · View at Scopus
  10. D. Y. Yoo, K. H. Min, J. M. Yang, and Y. S. Yoon, “Evaluation of shrinkage cracking characteristics and degree of restraint for ultra-high-strength Concrete,” Journal of the Korea Concrete Institute, vol. 22, no. 5, pp. 641–650, 2010. View at Publisher · View at Google Scholar
  11. CEB-FIP MC90, Comite euro-international du beton-federation international de la pre-contrainte (CEB-FIP), model code 90 for concrete structures, Thomas Telford Publishing, London, England, 1993. View at Publisher · View at Google Scholar
  12. ACI Committee 363, Report on High-strength Concrete (363R-10, American Concrete Institute, MI, Farmington Hills, 2010.
  13. ASTM, “Standard test method for compressive strength of cylindrical concrete specimens,” ASTM C39/C39M-16, ASTM International, West Conshohocken, Pa, USA.
  14. ASTM, “Standard test method for splitting tensile strength of cylindrical concrete specimens,” ASTM C496/C496M-11, ASTM International, West Conshohocken, Pa, USA.
  15. ASTM, “Standard test method for length change of hardened hydraulic-cement mortar and concrete,” ASTM C157/C157M-08, ASTM International, West Conshohocken, Pa, USA, 2014. View at Google Scholar
  16. ASTM, “Standard test method for determining age at cracking and induced tensile stress characteristics of mortar and concrete under restrained shrinkage, ASTM International,” ASTM C1581/C1581M-09a, ASTM International, West Conshohocken, Pa, USA, 2009. View at Google Scholar
  17. M. H. Zhang, C. T. Tam, and M. P. Leow, “Effect of water-to-cementitious materials ratio and silica fume on the autogenous shrinkage of concrete,” Cement and Concrete Research, vol. 33, no. 10, pp. 1687–1694, 2003. View at Publisher · View at Google Scholar · View at Scopus
  18. Z. Tao and Q. Weizu, “Tensile creep due to restraining stresses in high-strength concrete at early ages,” Cement and Concrete Research, vol. 36, no. 3, pp. 584–591, 2006. View at Publisher · View at Google Scholar · View at Scopus
  19. S. Miyazawa, T. Kuroi, and E. Tazawa, “Autogenous shrinkage of cementitious materials at early ages,” in Proceedings of the international workshop on control of cracking in early age concrete, pp. 203–212, Sendai, Japan, 2000.