Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017, Article ID 3707329, 12 pages
https://doi.org/10.1155/2017/3707329
Review Article

Micromechanics of Cracked Laminates under Uniaxial Load: A Comparison between Approaches

Escuela de Ingeniería y Ciencia, Tecnológico de Monterrey, Campus Estado de Mexico, Carretera Lago de Guadalupe Km. 3.5, Margarita Maza de Juárez, 52926 Atizapán de Zaragoza, MEX, Mexico

Correspondence should be addressed to U. Figueroa-López; xm.mseti@oreugifu

Received 10 February 2017; Revised 20 April 2017; Accepted 9 May 2017; Published 5 June 2017

Academic Editor: Paulo M. S. T. De Castro

Copyright © 2017 J. A. Rivera-Santana et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. M. Shokrieh and M. Esmkhani, “Fatigue life prediction of nanoparticle/fibrous polymeric composites based on the micromechanical and normalized stiffness degradation approaches,” Journal of Materials Science, vol. 48, no. 3, pp. 1027–1034, 2013. View at Publisher · View at Google Scholar · View at Scopus
  2. K. L. Reifsnider, “Some fundamental aspects of the fatigue and fracture response of composite materials,” in Proceedings of the Fourteenth Annual Meeting in Recent Advances in Engineering Science, pp. 373–384, Bethlehem, Pa, USA, November 1977.
  3. T. W. Kim, H. J. Kim, and S. Im, “Delamination crack originating from transverse cracking in cross-ply composite laminates under extension,” International Journal of Solids and Structures, vol. 27, no. 15, pp. 1925–1941, 1991. View at Publisher · View at Google Scholar · View at Scopus
  4. A. J. Brunner, S. Stelzer, G. Pinter, and G. P. Terrasi, “Cyclic fatigue delamination of carbon fiber-reinforced polymer-matrix composites: data analysis and design considerations,” International Journal of Fatigue, vol. 83, pp. 293–299, 2016. View at Publisher · View at Google Scholar · View at Scopus
  5. A. L. Highsmith and K. L. Reifsnider, “Stiffness-reduction mechanisms in composite laminates,” in Damage in Composite Materials: Basic Mechanisms, Accumulation, Tolerance, and Characterization, ASTM International, 1982. View at Google Scholar
  6. G. Dai and L. Mishnaevsky, “Damage evolution in nanoclay-reinforced polymers: a three-dimensional computational study,” Composites Science and Technology, vol. 74, pp. 67–77, 2013. View at Publisher · View at Google Scholar · View at Scopus
  7. K. W. Garrett and J. E. Bailey, “Multiple transverse fracture in 90° cross-ply laminates of a glass fibre-reinforced polyester,” Journal of Materials Science, vol. 12, no. 1, pp. 157–168, 1977. View at Publisher · View at Google Scholar · View at Scopus
  8. A. Parvizi, K. W. Garrett, and J. E. Bailey, “Constrained cracking in glass fibre-reinforced epoxy cross-ply laminates,” Journal of Materials Science, vol. 13, no. 1, pp. 195–201, 1978. View at Publisher · View at Google Scholar · View at Scopus
  9. M. G. Bader, J. E. Bailey, A. Parvizi, and P. T. Curtis, “The mechanisms of initiation and development of damage in multi-axial fibre-reinforced plastics laminates,” Mechanical Behaviour of Materials, pp. 227–239, 1980. View at Google Scholar
  10. H. L. Cox, “The elasticity and strength of paper and other fibrous materials,” British Journal of Applied Physics, vol. 3, no. 3, pp. 72–79, 1952. View at Publisher · View at Google Scholar · View at Scopus
  11. R. Talreja and C. V. Singh, Damage and Failure of Composite Materials, Cambridge University Press, 2012.
  12. J.-M. Berthelot, P. Leblond, A. El Mahi, and J.-F. Le Corre, “Transverse cracking of cross-ply laminates: Part 1. Analysis,” Composites Part A: Applied Science and Manufacturing, vol. 27, no. 10, pp. 989–1001, 1996. View at Publisher · View at Google Scholar · View at Scopus
  13. S. L. Ogin, P. A. Smith, and P. W. R. Beaumont, “Matrix cracking and stiffness reduction during the fatigue of a (0/90)s GFRP laminate,” Composites Science and Technology, vol. 22, no. 1, pp. 23–31, 1985. View at Publisher · View at Google Scholar · View at Scopus
  14. Z. Hashin, “Analysis of cracked laminates: a variational approach,” Mechanics of Materials, vol. 4, no. 2, pp. 121–136, 1985. View at Publisher · View at Google Scholar · View at Scopus
  15. J. A. Nairn, “The strain energy release rate of composite microcracking: a variational approach,” Journal of Composite Materials, vol. 23, no. 11, pp. 1106–1129, 1989. View at Publisher · View at Google Scholar · View at Scopus
  16. V. Vinogradov and Z. Hashin, “Probabilistic energy based model for prediction of transverse cracking in cross-ply laminates,” International Journal of Solids and Structures, vol. 42, no. 2, pp. 365–392, 2005. View at Publisher · View at Google Scholar · View at Scopus
  17. N. V. Akshantala and R. Talreja, “A micromechanics based model for predicting fatigue life of composite laminates,” Materials Science and Engineering: A, vol. 285, no. 1-2, pp. 303–313, 2000. View at Publisher · View at Google Scholar · View at Scopus
  18. L. N. McCartney, “Theory of stress transfer in a 0°-90°-0° cross-ply laminate containing a parallel array of transverse cracks,” Journal of the Mechanics and Physics of Solids, vol. 40, no. 1, pp. 27–68, 1992. View at Publisher · View at Google Scholar · View at Scopus
  19. J. Qu and K. Hoiseth, “Evolution of transverse matrix cracking in cross-ply laminates,” Fatigue and Fracture of Engineering Materials and Structures, vol. 21, no. 4, pp. 451–464, 1998. View at Google Scholar · View at Scopus
  20. S. K. Kanaun and V. Levin, Self-Consistent Methods for Composites, vol. 1 of Static Problems (Vol. 148), Springer Science & Business Media, 2007.
  21. E. J. Barbero, T. M. Damiani, and J. Trovillion, “Micromechanics of fabric reinforced composites with periodic microstructure,” International Journal of Solids and Structures, vol. 42, no. 9-10, pp. 2489–2504, 2005. View at Publisher · View at Google Scholar · View at Scopus
  22. E. J. Barbero and D. H. Cortes, “A mechanistic model for transverse damage initiation, evolution, and stiffness reduction in laminated composites,” Composites Part B: Engineering, vol. 41, no. 2, pp. 124–132, 2010. View at Publisher · View at Google Scholar · View at Scopus
  23. M. Ghayour, H. Hosseini-Toudeshky, M. Jalalvand, and E. J. Barbero, “Micro/macro approach for prediction of matrix cracking evolution in laminated composites,” Journal of Composite Materials, vol. 50, no. 19, pp. 2647–2659, 2016. View at Publisher · View at Google Scholar · View at Scopus
  24. R. Joffe, A. Krasnikovs, and J. Varna, “COD-based simulation of transverse cracking and stiffness reduction in [S/90n]s laminates,” Composites Science and Technology, vol. 61, no. 5, pp. 637–656, 2001. View at Publisher · View at Google Scholar · View at Scopus
  25. C. V. Singh and R. Talreja, “Analysis of multiple off-axis ply cracks in composite laminates,” International Journal of Solids and Structures, vol. 45, no. 16, pp. 4574–4589, 2008. View at Publisher · View at Google Scholar · View at Scopus
  26. C. V. Singh and R. Talreja, “A synergistic damage mechanics approach to mechanical response of composite laminates with ply cracks,” Journal of Composite Materials, vol. 47, no. 20-21, pp. 2475–2501, 2013. View at Publisher · View at Google Scholar · View at Scopus
  27. J. Montesano and C. V. Singh, “A synergistic damage mechanics based multiscale model for composite laminates subjected to multiaxial strains,” Mechanics of Materials, vol. 83, pp. 72–89, 2015. View at Publisher · View at Google Scholar
  28. M. Hajikazemi, M. H. Sadr, and J. Varna, “Analysis of cracked general cross-ply laminates under general bending loads: a variational approach,” Journal of Composite Materials, Article ID 0021998316682364, 2016. View at Google Scholar
  29. A. Adumitroaie, E. J. Barbero, and M. Schagerl, “Matrix cracking in non-symmetric laminates under combined membrane and flexural loading,” International Journal of Materials, Mechanics and Manufacturing, vol. 4, pp. 223–231, 2016. View at Google Scholar
  30. ANSYS® Workbench, Release 17.1, http://www.ansys.com/.
  31. C. V. Singh, Multiscale modeling of damage in multidirectional composite laminates dissertation [Ph.D. Thesis], Texas A & M University, College Station, Tex, USA, 2008.
  32. P. A. Smith and J. R. Wood, “Poisson's ratio as a damage parameter in the static tensile loading of simple crossply laminates,” Composites Science and Technology, vol. 38, no. 1, pp. 85–93, 1990. View at Publisher · View at Google Scholar · View at Scopus