Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017, Article ID 3709171, 6 pages
https://doi.org/10.1155/2017/3709171
Research Article

A Novel Silica-Nylon Mesh Reinforcement for Dental Prostheses

1Department of Dental Materials and Prosthodontics, Institute of Science and Technology, São Paulo State University (Unesp), São José dos Campos, SP, Brazil
2Postgraduation Program in Prosthodontics, Department of Dental Materials and Prosthodontics, Institute of Science and Technology, São Paulo State University (Unesp), São José dos Campos, SP, Brazil
3Postgraduation Program in Dentistry, Dental School, University of Passo Fundo, Passo Fundo, RS, Brazil
4Postdoctoral Program, Institute of Aeronautics Technology (ITA), São José dos Campos, SP, Brazil

Correspondence should be addressed to Tarcisio José de Arruda Paes-Junior; rb.psenu.cjsof@oisicrat

Received 9 June 2017; Revised 25 August 2017; Accepted 12 September 2017; Published 16 October 2017

Academic Editor: Jun Liu

Copyright © 2017 Tarcisio José de Arruda Paes-Junior et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Tarcisio José de Arruda Paes-Junior, Humberto Lago de Castro, Alexandre Luiz Souto Borges, Alvaro Della Bona, and Fernanda de Cássia Papaiz Gonçalves, “A Novel Silica-Nylon Mesh Reinforcement for Dental Prostheses,” Advances in Materials Science and Engineering, vol. 2017, Article ID 3709171, 6 pages, 2017. https://doi.org/10.1155/2017/3709171.