Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017 (2017), Article ID 4101503, 7 pages
https://doi.org/10.1155/2017/4101503
Research Article

Application of Conductive Materials to Asphalt Pavement

Department of Civil Engineering, Kunsan National University, 558 Daehak-ro, Kunsan, Jeonbuk 573-701, Republic of Korea

Correspondence should be addressed to Dae-Wook Park

Received 19 March 2017; Revised 15 May 2017; Accepted 1 June 2017; Published 5 July 2017

Academic Editor: Hainian Wang

Copyright © 2017 Hai Viet Vo and Dae-Wook Park. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. Yehia and C. Y. Tuan, “Conductive concrete overlay for bridge deck deicing,” ACI Materials Journal, vol. 96, no. 3, pp. 382–390, 1999. View at Google Scholar · View at Scopus
  2. F. Hutchinson, “Environmental pollution from highway deicing on highways,” Journal of Soil Water Conservation, vol. 25, pp. 144–146, 1970. View at Google Scholar
  3. W. A. Nixon, “Improved cutting edges for ice removal,” Strategic Highway Research Program Report, SHRP-H-346, Strategic Highway Research Program, Washington, DC, USA, 1993. View at Google Scholar
  4. Y. H. Wu, “Study on environmentally-friendly snow -melting agents application,” Advanced Materials Research, vol. 709, pp. 923–927, 2013. View at Publisher · View at Google Scholar · View at Scopus
  5. B. Jelisejevs, “Alternative methods of de-icing on highways,” Motorways, vol. 3, pp. 31–34, 2001. View at Google Scholar
  6. S. Wu, L. Mo, Z. Shui, and Z. Chen, “Investigation of the conductivity of asphalt concrete containing conductive fillers,” Carbon, vol. 43, no. 7, pp. 1358–1363, 2005. View at Publisher · View at Google Scholar · View at Scopus
  7. M. Chen, S. Wu, H. Wang, and J. Zhang, “Study of ice and snow melting process on conductive asphalt solar collector,” Solar Energy Materials and Solar Cells, vol. 95, no. 12, pp. 3241–3250, 2011. View at Publisher · View at Google Scholar · View at Scopus
  8. S. Wu, M. Chen, and J. Zhang, “Laboratory investigation into thermal response of asphalt pavements as solar collector by application of small-scale slabs,” Applied Thermal Engineering, vol. 31, no. 10, pp. 1582–1587, 2011. View at Publisher · View at Google Scholar · View at Scopus
  9. M. J. Khattak, A. Khattab, H. R. Rizvi, and P. Zhang, “The impact of carbon nano-fiber modification on asphalt binder rheology,” Construction and Building Materials, vol. 30, pp. 257–264, 2012. View at Publisher · View at Google Scholar · View at Scopus
  10. M. J. Khattak, A. Khattab, and H. R. Rizvi, “Characterization of carbon nano-fiber modified hot mix asphalt mixtures,” Construction and Building Materials, vol. 40, pp. 738–745, 2013. View at Publisher · View at Google Scholar · View at Scopus
  11. B. C. Bai, D.-W. Park, H. V. Vo, S. Dessouky, and J. S. Im, “Thermal properties of asphalt mixtures modified with conductive fillers,” Journal of Nanomaterials, vol. 2015, Article ID 926809, 6 pages, 2015. View at Publisher · View at Google Scholar · View at Scopus
  12. H. V. Vo, D. Park, W. Seo, and B. Yoo, “Evaluation of asphalt mixture modified with graphite and carbon fibers for winter adaptation: thermal conductivity improvement,” Journal of Materials in Civil Engineering, vol. 29, no. 1, 2017. View at Publisher · View at Google Scholar
  13. H. V. Vo, D. Park, and S. Dessouky, “Simulation of snow melting pavement performance using measured thermal properties of graphite-modified asphalt mixture,” Road Materials and Pavement Design, vol. 16, pp. 696–706, 2015. View at Publisher · View at Google Scholar
  14. Q. Zhang, Y. Yu, W. Chen, T. Chen, Y. Zhou, and H. Li, “Outdoor experiment of flexible sandwiched graphite-PET sheets based self-snow-thawing pavement,” Cold Regions Science and Technology, vol. 122, pp. 10–17, 2016. View at Publisher · View at Google Scholar · View at Scopus
  15. S.-H. Lee, D.-W. Park, H. V. Vo, and S. Dessouky, “Asphalt mixture for the first asphalt concrete directly fastened track in Korea,” Advances in Materials Science and Engineering, vol. 2015, Article ID 701940, 6 pages, 2015. View at Publisher · View at Google Scholar · View at Scopus
  16. ISO Standard, “Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method,” ISO Standard 22007-2, Geneva, Switzerland, 2008. View at Google Scholar