Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017, Article ID 4145369, 9 pages
https://doi.org/10.1155/2017/4145369
Research Article

Looking for New Polycrystalline MC-Reinforced Cobalt-Based Superalloys Candidate to Applications at 1200°C

Institut Jean Lamour (CNRS UMR 7198), Faculty of Sciences and Technologies, University of Lorraine, BP 70239, 54506 Vandoeuvre-lès-Nancy, France

Correspondence should be addressed to Patrice Berthod; rf.eniarrol-vinu@dohtreb.ecirtap

Received 7 December 2016; Revised 17 February 2017; Accepted 22 February 2017; Published 9 March 2017

Academic Editor: Santiago Garcia-Granda

Copyright © 2017 Patrice Berthod. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. C. Sims and W. Hagel, The Superalloys, John Wiley & Sons, New York, NY, USA, 1972.
  2. E. Bradley, Superalloys: A Technical Guide, ASM International, Metals Park, Ohio, USA, 1988.
  3. M. J. Donachie and S. J. Donachie, Superalloys: A Technical Guide, ASM International, Materials Park, Ohio, USA, 2nd edition, 2002.
  4. E. Nembach and G. Neite, “Precipitation hardening of superalloys by ordered γ′-particles,” Progress in Materials Science, vol. 29, no. 3, pp. 177–319, 1985. View at Publisher · View at Google Scholar · View at Scopus
  5. C. Cui, D. Ping, Y. Gu, and H. Harada, “A new co-base superalloy strengthened by γ′ phase,” Materials Transactions, vol. 47, no. 8, pp. 2099–2102, 2006. View at Publisher · View at Google Scholar · View at Scopus
  6. B. Mishra, M. Ionescu, and T. Chandra, “Feasability of cast and wrought Co-Al-W-X gamma prime superalloys,” Materials Science Forum, vol. 783–786, pp. 1159–1164, 2013. View at Google Scholar
  7. M. Klauke, D. Mukherji, B. Gorr, V. B. Da Trindade Filho, J. Rösler, and H.-J. Christ, “Oxidation behaviour of experimental Co-Re-base alloys in laboratory air at 1000°C,” International Journal of Materials Research, vol. 100, no. 1, pp. 104–111, 2009. View at Publisher · View at Google Scholar · View at Scopus
  8. B. Gorr, S. Burk, T. Depka et al., “Effect of Si addition on the oxidation resistance of Co-Re-Cr-alloys: recent attainments in the development of novel alloys,” International Journal of Materials Research, vol. 103, no. 1, pp. 24–30, 2012. View at Publisher · View at Google Scholar · View at Scopus
  9. B. Gorr, M. Azim, H.-J. Christ et al., “Microstructure Evolution in a New Refractory High-Entropy Alloy W-Mo-Cr-Ti-Al,” Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 47, no. 2, pp. 961–970, 2016. View at Publisher · View at Google Scholar · View at Scopus
  10. P. Berthod, “High temperature properties of several chromium-containing Co-based alloys reinforced by different types of MC carbides (M = Ta, Nb, Hf and/or Zr),” Journal of Alloys and Compounds, vol. 481, no. 1-2, pp. 746–754, 2009. View at Publisher · View at Google Scholar · View at Scopus
  11. S. R. Shatynski, “The thermochemistry of transition metal carbides,” Oxidation of Metals, vol. 13, no. 2, pp. 105–118, 1979. View at Publisher · View at Google Scholar · View at Scopus
  12. A. Baldan, “Microstructural investigation of DS200 + Hf superalloy,” Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques, vol. 80, no. 9, pp. 635–642, 1989. View at Google Scholar · View at Scopus
  13. P. S. Kotval, J. D. Venables, and R. W. Calder, “Role of hafnium in modifying the microstructure of cast nickel-base superalloys,” Met Trans, vol. 3, no. 2, pp. 453–458, 1972. View at Google Scholar · View at Scopus
  14. Y. Murata, K. Suga, and N. Yukawa, “Effect of transition elements on the properties of MC carbides in IN-100 nickel-based superalloy,” Journal of Materials Science, vol. 21, no. 10, pp. 3653–3660, 1986. View at Publisher · View at Google Scholar · View at Scopus
  15. C. T. Sims, “Niobium in superalloys: a perspective,” High Temperature Technology, vol. 2, no. 4, pp. 185–201, 1984. View at Publisher · View at Google Scholar · View at Scopus
  16. M. C. Dropmann, D. Stover, H. P. Buchkremer, and R. M. German, “Properties and processing of niobium superalloys by injection molding,” in Advances in Powder Metallurgy and Particulate Materials, vol. 8, pp. 213–224, Metal Powder Industries Federation, 1992. View at Google Scholar
  17. Y. Zhai, D. A. Lados, E. J. Brown, and G. N. Vigilante, “Fatigue crack growth behavior and microstructural mechanisms in Ti-6Al-4V manufactured by laser engineered net shaping,” International Journal of Fatigue, vol. 93, no. 1, pp. 51–63, 2016. View at Publisher · View at Google Scholar
  18. B. Chen, H. Xiong, B. Sun, S. Tang, B. Du, and N. Li, “Microstructures and mechanical properties of Ti3Al/Ni-based superalloy joints arc welded with Ti-Nb and Ti-Ni-Nb filler alloys,” Progress in Natural Science: Materials International, vol. 24, no. 4, pp. 313–320, 2014. View at Publisher · View at Google Scholar · View at Scopus
  19. Z. Opiekun, “Influence of zirconium and heat treatment on the structure of heat-resistant cobalt casting alloys of MAR-M509 type,” Journal of Materials Science, vol. 22, no. 5, pp. 1547–1556, 1987. View at Publisher · View at Google Scholar · View at Scopus
  20. Y.-L. Tsai, S.-F. Wang, H.-Y. Bor, and Y.-F. Hsu, “Effects of Zr addition on the microstructure and mechanical behavior of a fine-grained nickel-based superalloy at elevated temperatures,” Materials Science and Engineering A, vol. 607, pp. 294–301, 2014. View at Publisher · View at Google Scholar · View at Scopus
  21. H. Paul, M. Darrieulat, N. Vanderesse, L. Lityńska, and M. Miszczyk, “Microstructure of warm worked Zircalloy-4,” Archives of Metallurgy and Materials, vol. 55, no. 4, pp. 1007–1019, 2010. View at Publisher · View at Google Scholar · View at Scopus