Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017, Article ID 4387545, 7 pages
Research Article

Flexural Strengthening of RC Slabs Using a Hybrid FRP-UHPC System Including Shear Connector

1Department of Civil Engineering, Kangwon National University, Chuncheon-si, Gangwon-do 24341, Republic of Korea
2Department of Civil Engineering, University of New Mexico, MSC01 1070, Albuquerque, NM 87131-0001, USA
3Department of Civil Engineering, Kyungnam University, 7 Kyungnamdaehak-ro, Changwon-si 51767, Republic of Korea

Correspondence should be addressed to Jung J. Kim;

Received 11 April 2017; Accepted 7 May 2017; Published 5 June 2017

Academic Editor: Doo-Yeol Yoo

Copyright © 2017 Jiho Moon et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. K. M. Mosalam and A. S. Mosallam, “Nonlinear transient analysis of reinforced concrete slabs subjected to blast loading and retrofitted with CFRP composites,” Composites Part B, vol. 32, no. 8, pp. 623–636, 2001. View at Publisher · View at Google Scholar · View at Scopus
  2. A. S. Mosallam and K. M. Mosalam, “Strengthening of two-way concrete slabs with FRP composite laminates,” Construction and Building Materials, vol. 17, no. 1, pp. 43–54, 2003. View at Publisher · View at Google Scholar · View at Scopus
  3. M. I. Ary and T. H.-K. Kang, “Shear-strengthening of reinforced & prestressed concrete beams using FRP: part I—review of previous research,” International Journal of Concrete Structures and Materials, vol. 6, no. 1, pp. 41–47, 2012. View at Publisher · View at Google Scholar · View at Scopus
  4. C. J. Fleming and G. E. M. King, “The development of structural adhesives for three original uses in South Africa,” in Proceedings of the RILEM International Symposium, Synthetic Resins in Building Construction, pp. 75–92, Paris, France, 1967.
  5. P. H. Emmons, A. M. Vaysburd, and J. Thomas, “Strengthening concrete structures, Part II,” Concrete International, vol. 20, no. 4, pp. 56–60, 1998. View at Google Scholar · View at Scopus
  6. J. Nam, H. Kim, S. Kim, N. Yi, and J. J. Kim, “Numerical evaluation of the retrofit effectiveness for GFRP retrofitted concrete slab subjected to blast pressure,” Composite Structures, vol. 92, no. 5, pp. 1212–1222, 2010. View at Publisher · View at Google Scholar · View at Scopus
  7. J. Li, C. Wu, H. Hao, Y. Su, and Z. Liu, “Blast resistance of concrete slab reinforced with high performance fibre material,” Journal of Structural Integrity and Maintenance, vol. 1, no. 2, pp. 51–59, 2016. View at Publisher · View at Google Scholar
  8. S. Rizkalla, T. Hassan, and N. Hassan, “Design recommendations for the use of FRP for reinforcement and strengthening of concrete structures,” Progress in Structural Engineering and Materials, vol. 5, no. 1, pp. 16–28, 2003. View at Publisher · View at Google Scholar
  9. ACI Committee 440, “Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures,” Tech. Rep. ACI 440.2R-08, Farmington Hills, Mich, USA, 2008. View at Google Scholar
  10. A. Mosallam, M. M. Reda Taha, J. J. Kim, and A. Nasr, “Strength and ductility of RC slabs strengthened with hybrid high-performance composite retrofit system,” Engineering Structures, vol. 36, pp. 70–80, 2012. View at Publisher · View at Google Scholar · View at Scopus
  11. J. G. MacGregor and J. K. Wight, Reinforced Concrete: Mechanics and Design 5th, Prentice Hall, USA, 2005.
  12. J. J. Kim, H.-C. Noh, M. M. Reda Taha, and A. Mosallam, “Design limits for RC slabs strengthened with hybrid FRP-HPC retrofit system,” Composites Part B, vol. 51, pp. 19–27, 2013. View at Publisher · View at Google Scholar · View at Scopus
  13. ACI Committee 318, “Building Code Requirements for Structural Concrete (ACI 318-05) and Commentary (318R-05),” International Journal of Cement Composites and Lightweight Concrete, American Concrete Institute, Farmington Hills, USA, 2005. View at Publisher · View at Google Scholar
  14. ABAQUS, "ABAQUS analysis user’s manual version 6.9-2", Dassault Systemes Simulia Corp., Providence, RI, USA, 2009.