Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017, Article ID 4768718, 12 pages
https://doi.org/10.1155/2017/4768718
Research Article

Investigation on Reinforced Mechanism of Fiber Reinforced Asphalt Concrete Based on Micromechanical Modeling

School of Civil Engineering, Hebei University of Engineering, Handan 056038, China

Correspondence should be addressed to Qinglin Guo; nc.ude.uebeh@lqoug

Received 11 October 2016; Revised 3 December 2016; Accepted 25 December 2016; Published 18 January 2017

Academic Editor: Akihiko Kimura

Copyright © 2017 Ying Gao et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Y. Cheng, J. Tao, Y. Jiao, Q. Guo, and C. Li, “Influence of diatomite and mineral powder on thermal oxidative ageing properties of asphalt,” Advances in Materials Science and Engineering, vol. 2015, Article ID 947834, 10 pages, 2015. View at Publisher · View at Google Scholar · View at Scopus
  2. J. Mikolaj, L. Remek, and M. Kozel, “Optimization of life cycle extension of asphalt concrete mixtures in regard to material properties, structural design, and economic implications,” Advances in Materials Science and Engineering, vol. 2016, Article ID 6158432, 9 pages, 2016. View at Publisher · View at Google Scholar
  3. S. M. Abtahi, S. Esfandiarpour, M. Kunt, S. M. Hejazi, and M. G. Ebrahimi, “Hybrid reinforcement of asphalt-concrete mixtures using glass and polypropylene fibers,” Journal of Engineered Fibers and Fabrics, vol. 8, no. 2, pp. 25–35, 2013. View at Google Scholar · View at Scopus
  4. S. Serin, N. Morova, M. Saltan, S. Terzi, and M. Karaşahin, “Prediction of the marshall stability of reinforced asphalt concrete with steel fiber using fuzzy logic,” Journal of Intelligent and Fuzzy Systems, vol. 26, no. 4, pp. 1943–1950, 2014. View at Publisher · View at Google Scholar · View at Scopus
  5. A. García, J. Norambuena-Contreras, and M. N. Partl, “A parametric study on the influence of steel wool fibers in dense asphalt concrete,” Materials and Structures/Materiaux et Constructions, vol. 47, no. 9, pp. 1559–1571, 2014. View at Publisher · View at Google Scholar · View at Scopus
  6. X. Qin, A. Q. Shen, and Y. C. Guo, “Experimental study on road performance of basalt fiber reinforced Bitumen mastics,” Journal of Building Materials, vol. 19, no. 4, pp. 660–664, 2016 (Chinese). View at Google Scholar
  7. S. Tapkin and Ş. Özcan, “Determination of the optimal polypropylene fiber addition to the dense bituminous mixtures by the aid of mechanical and optical means,” Baltic Journal of Road and Bridge Engineering, vol. 7, no. 1, pp. 22–29, 2012. View at Publisher · View at Google Scholar · View at Scopus
  8. Y. Kim and T.-S. Park, “Reinforcement of recycled foamed asphalt using short polypropylene fibers,” Advances in Materials Science and Engineering, vol. 2013, Article ID 903236, 9 pages, 2013. View at Publisher · View at Google Scholar · View at Scopus
  9. Q. Guo, L. Li, Y. Cheng, Y. Jiao, and C. Xu, “Laboratory evaluation on performance of diatomite and glass fiber compound modified asphalt mixture,” Materials and Design, vol. 66, pp. 51–59, 2015. View at Publisher · View at Google Scholar · View at Scopus
  10. S. Oda, J. L. Fernandes Jr., and J. S. Ildefonso, “Analysis of use of natural fibers and asphalt rubber binder in discontinuous asphalt mixtures,” Construction and Building Materials, vol. 26, no. 1, pp. 13–20, 2012. View at Publisher · View at Google Scholar · View at Scopus
  11. T. R. Herráiz, J. I. R. Herráiz, L. M. Domingo, and F. C. Domingo, “Posidonia oceanica used as a new natural fibre to enhance the performance of asphalt mixtures,” Construction and Building Materials, vol. 102, pp. 601–612, 2016. View at Publisher · View at Google Scholar · View at Scopus
  12. P. J. Yoo and K.-H. Kim, “Thermo-plastic fiber's reinforcing effect on hot-mix asphalt concrete mixture,” Construction and Building Materials, vol. 59, pp. 136–143, 2014. View at Publisher · View at Google Scholar · View at Scopus
  13. H. Chen and Q. Xu, “Experimental study of fibers in stabilizing and reinforcing asphalt binder,” Fuel, vol. 89, no. 7, pp. 1616–1622, 2010. View at Publisher · View at Google Scholar · View at Scopus
  14. S. Qian, H. Ma, J. Feng, R. Yang, and X. Huang, “Fiber reinforcing effect on asphalt binder under low temperature,” Construction and Building Materials, vol. 61, pp. 120–124, 2014. View at Publisher · View at Google Scholar · View at Scopus
  15. S. Tapkin, “The effect of polypropylene fibers on asphalt performance,” Building and Environment, vol. 43, no. 6, pp. 1065–1071, 2008. View at Publisher · View at Google Scholar · View at Scopus
  16. N. Morova, S. Serin, S. Terzi et al., “Utility of polyparaphenylene terephtalamide fiber in hot mix asphalt as a fiber,” Construction and Building Materials, vol. 107, pp. 87–94, 2016. View at Publisher · View at Google Scholar · View at Scopus
  17. H. Chen, Q. Xu, S. Chen, and Z. Zhang, “Evaluation and design of fiber-reinforced asphalt mixtures,” Materials and Design, vol. 30, no. 7, pp. 2595–2603, 2009. View at Publisher · View at Google Scholar · View at Scopus
  18. Q. Xue, L. Liu, and Y.-J. Chen, “Study on the action effect of pavement straw composite fiber material in asphalt mixture,” Construction and Building Materials, vol. 43, pp. 293–299, 2013. View at Publisher · View at Google Scholar · View at Scopus
  19. Q. Ye, S. Wu, and N. Li, “Investigation of the dynamic and fatigue properties of fiber-modified asphalt mixtures,” International Journal of Fatigue, vol. 31, no. 10, pp. 1598–1602, 2009. View at Publisher · View at Google Scholar · View at Scopus
  20. S. Wu, Q. Ye, N. Li, and H. Yue, “Effects of fibers on the dynamic properties of asphalt mixtures,” Journal Wuhan University of Technology, Materials Science Edition, vol. 22, no. 4, pp. 733–736, 2007. View at Publisher · View at Google Scholar · View at Scopus
  21. A. García, J. Norambuena-Contreras, M. Bueno, and M. N. Partl, “Influence of steel wool fibers on the mechanical, termal, and healing properties of dense asphalt concrete,” Journal of Testing and Evaluation, vol. 42, no. 5, 2014. View at Publisher · View at Google Scholar · View at Scopus
  22. N. Morova, “Investigation of usability of basalt fibers in hot mix asphalt concrete,” Construction and Building Materials, vol. 47, pp. 175–180, 2013. View at Publisher · View at Google Scholar · View at Scopus
  23. C. M. Gao, Microcosmic analysis and performance research of basalt fiber asphalt concrete [Ph.D. disseration], Jilin University, 2012 (Chinese).
  24. J. Fu, H. Liu, and Y. Cheng, “Mechanical parameter measuring and contrastive analysis on pavement performance of glass fiber reinforced bituminous mixtures,” in Proceedings of the International Conference on Transportation Engineering, pp. 425–430, Chengdu, China, July 2007.
  25. P. Park, S. El-Tawil, S.-Y. Park, and A. E. Naaman, “Cracking resistance of fiber reinforced asphalt concrete at −20 °C,” Construction and Building Materials, vol. 81, pp. 47–57, 2015. View at Publisher · View at Google Scholar · View at Scopus
  26. R. K. A. Al-Rub, T. You, E. A. Masad, and D. N. Little, “Mesomechanical modeling of the thermo-viscoelastic, thermo-viscoplastic, and thermo-viscodamage response of asphalt concrete,” International Journal of Advances in Engineering Sciences and Applied Mathematics, vol. 3, no. 1, pp. 14–33, 2011. View at Publisher · View at Google Scholar
  27. Z. You, Y. Liu, and Q. Dai, “Three-dimensional microstructural-based discrete element viscoelastic modeling of creep compliance tests for asphalt mixtures,” Journal of Materials in Civil Engineering, vol. 23, no. 1, pp. 79–87, 2011. View at Publisher · View at Google Scholar · View at Scopus
  28. Y. Liu and Z. You, “Accelerated discrete-element modeling of asphalt-based materials with the frequency-temperature superposition principle,” Journal of Engineering Mechanics, vol. 137, no. 5, pp. 355–365, 2011. View at Publisher · View at Google Scholar · View at Scopus
  29. Y. Liu and Z. P. You, “Simulation of cyclic loading tests for asphalt mixtures using user defined models within discrete element method,” Geotechnical Special Publication, vol. 179, pp. 742–749, 2008. View at Google Scholar
  30. Q. Dai and Z. You, “Prediction of creep stiffness of asphalt mixture with micromechanical finite-element and discrete-element models,” Journal of Engineering Mechanics, vol. 133, no. 2, pp. 163–173, 2007. View at Publisher · View at Google Scholar · View at Scopus
  31. H. Wang and P. Hao, “Numerical simulation of indirect tensile test based on the microstructure of asphalt mixture,” Journal of Materials in Civil Engineering, vol. 23, no. 1, pp. 21–29, 2011. View at Publisher · View at Google Scholar · View at Scopus
  32. H. N. Wang, Z. H. Huang, L. Li, Z. P. You, and Y. Chen, “Three-dimensional modeling and simulation of asphalt concrete mixtures based on X-ray CT microstructure images,” Journal of Traffic and Transportation Engineering, vol. 1, no. 1, pp. 55–61, 2014. View at Google Scholar
  33. H.-N. Wang, P.-W. Hao, and G.-Y. Lu, “Distribution properties of internal air voids in asphalt mixtures,” Journal of Traffic and Transportation Engineering, vol. 9, no. 1, pp. 6–11, 2009. View at Google Scholar · View at Scopus
  34. K. H. Moon and A. C. Falchetto, “Microstructural investigation of Hot Mix Asphalt (HMA) mixtures using Digital Image Processing (DIP),” KSCE Journal of Civil Engineering, vol. 19, no. 6, pp. 1727–1737, 2015. View at Publisher · View at Google Scholar · View at Scopus
  35. Z. Dong, X. Gong, L. Zhao, and L. Zhang, “Mesostructural damage simulation of asphalt mixture using microscopic interface contact models,” Construction and Building Materials, vol. 53, pp. 665–673, 2014. View at Publisher · View at Google Scholar · View at Scopus
  36. H. Wang, J. Wang, and J. Chen, “Micromechanical analysis of asphalt mixture fracture with adhesive and cohesive failure,” Engineering Fracture Mechanics, vol. 132, pp. 104–119, 2014. View at Publisher · View at Google Scholar · View at Scopus
  37. A. Y. Yin, X. H. Yang, and Z. J. Yang, “2D and 3D fracture modeling of asphalt mixture with randomly distributed aggregates and embedded cohesive cracks,” Procedia IUTAM, vol. 6, pp. 114–122, 2013. View at Publisher · View at Google Scholar
  38. L.-Z. Song, Q.-F. Wang, G. Peng, and Y. Jiang, “Numerical simulation method for the domain with large number of random ellipse grains and their application,” Chinese Journal of Computational Mechanics, vol. 29, no. 5, pp. 662–667, 2012. View at Google Scholar · View at Scopus
  39. Q. Guo, Y. Bian, L. Li, Y. Jiao, J. Tao, and C. Xiang, “Stereological estimation of aggregate gradation using digital image of asphalt mixture,” Construction and Building Materials, vol. 94, pp. 458–466, 2015. View at Publisher · View at Google Scholar · View at Scopus
  40. I. Ioannis, H. Alma, G. Inna, S. Costas, and M. A. Almaadeed, “Micro-mechanical parameters in short fibre composite,” Applied Composite Materials, vol. 21, no. 1, pp. 197–211, 2014. View at Publisher · View at Google Scholar · View at Scopus
  41. Y. Yu, J. Cui, and F. Han, “An effective computer generation method for the composites with random distribution of large numbers of heterogeneous grains,” Composites Science and Technology, vol. 68, no. 12, pp. 2543–2550, 2008. View at Publisher · View at Google Scholar · View at Scopus
  42. T. Ma, Y. Zhang, H. Wang, X. Huang, and Y. Zhao, “Influences by air voids on the low-temperature cracking property of dense-graded asphalt concrete based on micromechanical modeling,” Advances in Materials Science and Engineering, vol. 2016, Article ID 6942696, 10 pages, 2016. View at Publisher · View at Google Scholar
  43. X. F. Wang, Z. J. Yang, J. R. Yates, A. P. Jivkov, and C. Zhang, “Monte Carlo simulations of mesoscale fracture modelling of concrete with random aggregates and pores,” Construction and Building Materials, vol. 75, pp. 35–45, 2015. View at Publisher · View at Google Scholar · View at Scopus
  44. D. Castillo and S. Caro, “Probabilistic modeling of air void variability of asphalt mixtures in flexible pavements,” Construction and Building Materials, vol. 61, pp. 138–146, 2014. View at Publisher · View at Google Scholar · View at Scopus
  45. Z. J. Yang, X. T. Su, J. F. Chen, and G. H. Liu, “Monte Carlo simulation of complex cohesive fracture in random heterogeneous quasi-brittle materials,” International Journal of Solids and Structures, vol. 46, no. 17, pp. 3222–3234, 2009. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  46. Q. L. Guo, Research on internal stress distribution of asphalt mixture and its impact on viscoelastic performance [Ph.D. thesis], Jilin University, Changchun, China, 2013 (Chinese).
  47. M. Pettinari and A. Simone, “Effect of crumb rubber gradation on a rubberized cold recycled mixture for road pavements,” Materials and Design, vol. 85, pp. 598–606, 2015. View at Publisher · View at Google Scholar · View at Scopus
  48. EN, “Test methods for hot mix asphalt. Part 26: stiffness,” EN 12697-26. Bituminous mixtures, British Standards Institution, London, UK, 2006. View at Google Scholar
  49. D.-Y. Wang, W.-L. Wu, X.-N. Zhang, J.-M. Yu, and Z. Li, “Numerical simulation of splitting test of asphalt mixture based on DIP-FEM,” Journal of Jilin University (Engineering and Technology Edition), vol. 41, no. 4, pp. 968–973, 2011 (Chinese). View at Google Scholar · View at Scopus
  50. A. E. Naaman and H. W. Reinhardt, “Proposed classification of HPFRC composites based on their tensile response,” Materials and Structures/Materiaux et Constructions, vol. 39, no. 289, pp. 547–555, 2006. View at Publisher · View at Google Scholar · View at Scopus
  51. L. Ma and X. N. Zhang, “Comparison of HMA dynamic moduli between indirect tension and uniaxial compression test modes,” Journal of Highway and Transportation Research and Development, vol. 26, no. 10, pp. 11–17, 2009. View at Google Scholar
  52. R. D. Peng, H. W. Zhou, H. W. Wang, and L. Mishnaevsky Jr., “Modeling of nano-reinforced polymer composites: microstructure effect on Young's modulus,” Computational Materials Science, vol. 60, pp. 19–31, 2012. View at Publisher · View at Google Scholar · View at Scopus
  53. Y.-Q. Tan, L. Zhang, M. Guo, and L.-Y. Shan, “Investigation of the deformation properties of asphalt mixtures with DIC technique,” Construction and Building Materials, vol. 37, pp. 581–590, 2012. View at Publisher · View at Google Scholar · View at Scopus
  54. H. Y. Katman, M. R. Ibrahim, M. R. Karim, S. Koting, and N. S. Mashaan, “Effect of rubberized bitumen blending methods on permanent deformation of SMA rubberized asphalt mixtures,” Advances in Materials Science and Engineering, vol. 2016, Article ID 4395063, 14 pages, 2016. View at Publisher · View at Google Scholar · View at Scopus
  55. B. J. Putman and S. N. Amirkhanian, “Utilization of waste fibers in stone matrix asphalt mixtures,” Resources, Conservation and Recycling, vol. 42, no. 3, pp. 265–274, 2004. View at Publisher · View at Google Scholar · View at Scopus
  56. H. F. Hassan and K. S. Al-Jabri, “Effect of organic fibers on open-graded friction course mixture properties,” International Journal of Pavement Engineering, vol. 6, no. 1, pp. 67–75, 2005. View at Publisher · View at Google Scholar · View at Scopus
  57. Y. Zhang, Q. Guo, L. Li, P. Jiang, Y. Jiao, and Y. Cheng, “Reuse of boron waste as an additive in road base material,” Materials, vol. 9, no. 6, article 416, 2016. View at Publisher · View at Google Scholar · View at Scopus