Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017, Article ID 5131403, 11 pages
https://doi.org/10.1155/2017/5131403
Research Article

Effect of Equal Channel Angular Pressing on the Surface Roughness of Solid State Recycled Aluminum Alloy 6061 Chips

1Department of Mechanical Engineering, College of Engineering, King Saud University, Riyadh, Saudi Arabia
2Department of Mechanical Design and Production, College of Engineering, Zagazig University, Sharkia, Egypt
3Department of Industrial Engineering, College of Engineering, King Saud University, Riyadh, Saudi Arabia

Correspondence should be addressed to Adel Taha Abbas; moc.oohay@4591sabbata

Received 4 January 2017; Revised 5 February 2017; Accepted 7 February 2017; Published 6 March 2017

Academic Editor: Pavel Lejcek

Copyright © 2017 Adel Taha Abbas et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. E. Tekkaya, M. Schikorra, D. Becker, D. Biermann, N. Hammer, and K. Pantke, “Hot profile extrusion of AA-6060 aluminum chips,” Journal of Materials Processing Technology, vol. 209, no. 7, pp. 3343–3350, 2009. View at Publisher · View at Google Scholar · View at Scopus
  2. J. Z. Gronostajski, J. W. Kaczmar, H. Marciniak, and A. Matuszak, “Production of composites from Al and AlMg2 alloy chips,” Journal of Materials Processing Technology, vol. 77, no. 1–3, pp. 37–41, 1998. View at Google Scholar · View at Scopus
  3. W. H. Macintosh, “Induction furnaces for melting secondary aluminium,” Conservation and Recycling, vol. 6, no. 1-2, pp. 41–48, 1983. View at Publisher · View at Google Scholar · View at Scopus
  4. J. Z. Gronostajski, H. Marciniak, and A. Matuszak, “Production of composites on the base of AlCu4 alloy chips,” Journal of Materials Processing Technology, vol. 60, no. 1-4, pp. 719–722, 1996. View at Publisher · View at Google Scholar · View at Scopus
  5. M. Haase and A. E. Tekkaya, “Cold extrusion of hot extruded aluminum chips,” Journal of Materials Processing Technology, vol. 217, pp. 356–367, 2015. View at Publisher · View at Google Scholar · View at Scopus
  6. W. Tang and A. P. Reynolds, “Production of wire via friction extrusion of aluminum alloy machining chips,” Journal of Materials Processing Technology, vol. 210, no. 15, pp. 2231–2237, 2010. View at Publisher · View at Google Scholar · View at Scopus
  7. R. Chiba and M. Yoshimura, “Solid-state recycling of aluminium alloy swarf into c-channel by hot extrusion,” Journal of Manufacturing Processes, vol. 17, pp. 1–8, 2015. View at Publisher · View at Google Scholar · View at Scopus
  8. T. Aida, N. Takatsuji, K. Matsuki, S. Kamado, and Y. Kojima, “Homogeneous consolidation process by ECAP for AZ31 cutting chips,” Journal of Japan Institute of Light Metals, vol. 54, no. 11, pp. 532–537, 2004. View at Publisher · View at Google Scholar · View at Scopus
  9. T. Takahashj, Y. Kume, M. Kobashi, and N. Kanetake, “Solid state recycling of aluminum machined chip wastes by compressive torsion processing,” Keikinzoku/Journal of Japan Institute of Light Metals, vol. 59, no. 7, pp. 354–358, 2009. View at Publisher · View at Google Scholar · View at Scopus
  10. T. Peng, Q. D. Wang, and J. B. Lin, “Microstructure and mechanical properties of Mg-10Gd-2Y-0.5Zr alloy recycled by cyclic extrusion compression,” Materials Science and Engineering A, vol. 516, no. 1-2, pp. 23–30, 2009. View at Publisher · View at Google Scholar · View at Scopus
  11. E. A. El-Danaf, “Mechanical properties, microstructure and texture of single pass equal channel angular pressed 1050, 5083, 6082 and 7010 aluminum alloys with different dies,” Materials and Design, vol. 32, no. 7, pp. 3838–3853, 2011. View at Publisher · View at Google Scholar · View at Scopus
  12. M. S. Soliman, E. A. El-Danaf, and A. A. Almajid, “Effect of equal-channel angular pressing process on properties of 1050 Al alloy,” Materials and Manufacturing Processes, vol. 27, no. 7, pp. 746–750, 2012. View at Publisher · View at Google Scholar · View at Scopus
  13. M. Furukawa, Z. Horita, M. Nemoto, and T. G. Langdon, “The use of severe plastic deformation for microstructural control,” Materials Science and Engineering A, vol. 324, no. 1-2, pp. 82–89, 2002. View at Publisher · View at Google Scholar · View at Scopus
  14. K. Nakashima, Z. Horita, M. Nemoto, and T. G. Langdon, “Influence of channel angle on the development of ultrafine grains in equal-channel angular pressing,” Acta Materialia, vol. 46, no. 5, pp. 1589–1599, 1998. View at Publisher · View at Google Scholar · View at Scopus
  15. R. Z. Valiev and T. G. Langdon, “Principles of equal-channel angular pressing as a processing tool for grain refinement,” Progress in Materials Science, vol. 51, no. 7, pp. 881–981, 2006. View at Publisher · View at Google Scholar · View at Scopus
  16. A. T. Abbas, A. E. Ragab, E. A. El-Danaf, and E. A. Al Bahkali, “Effect of equal-channel angular pressing on the surface roughness of commercial purity aluminum during turning operation,” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2016. View at Publisher · View at Google Scholar
  17. S. S. Khamis, M. A. Lajis, and R. A. O. Albert, “A sustainable direct recycling of aluminum chip (AA6061) in hot press forging employing response surface methodology,” Procedia CIRP, vol. 26, pp. 477–481, 2015. View at Google Scholar
  18. B. L. Chan and M. A. Lajis, “Recycling of aluminium 6061 ChipThrough cold compression,” International Journal of Engineering & Technology, vol. 15, no. 4, 2015. View at Google Scholar
  19. J. R. Duflou, A. E. Tekkaya, M. Haase et al., “Environmental assessment of solid state recycling routes for aluminium alloys: can solid state processes significantly reduce the environmental impact of aluminium recycling?” CIRP Annals—Manufacturing Technology, vol. 64, no. 1, pp. 37–40, 2015. View at Publisher · View at Google Scholar · View at Scopus
  20. H. Tebassi, M. A. Yallese, R. Khettabi, S. Belhadi, I. Meddour, and F. Girardin, “Multi-objective optimization of surface roughness, cutting forces, productivity and Power consumption when turning of Inconel 718,” International Journal of Industrial Engineering Computations, vol. 7, no. 1, pp. 111–134, 2016. View at Publisher · View at Google Scholar · View at Scopus
  21. K. Kadirgama, M. M. Noor, N. M. Zuki et al., “Optimization of surface roughness in end milling on mould aluminium alloys (AA6061-T6) using response surface method and radian basis function network,” Jourdan Journal of Mechanical and Industrial Engineering, vol. 2, no. 4, pp. 209–213, 2008. View at Google Scholar
  22. K. Kadirgama, M. M. Noor, M. M. Rahman, M. R. M. Rejab, C. H. C. Haron, and K. A. Abou-El-Hossein, “Surface roughness prediction model of 6061-T6 aluminium alloy machining using statistical method,” European Journal of Scientific Research, vol. 25, no. 2, pp. 250–256, 2009. View at Google Scholar
  23. D. C. Montgomery, Design and Analysis of Experiments, John Wiley & Sons, New York, NY, USA, 2013.
  24. G. E. P. Box and D. W. Behnken, “Some new three level designs for the study of quantitative variables,” Technometrics, vol. 2, no. 4, pp. 455–475, 1960. View at Publisher · View at Google Scholar · View at Scopus
  25. M. Haase, N. Ben Khalifa, A. E. Tekkaya, and W. Z. Misiolek, “Improving mechanical properties of chip-based aluminum extrudates by integrated extrusion and equal channel angular pressing (iECAP),” Materials Science and Engineering A, vol. 539, pp. 194–204, 2012. View at Publisher · View at Google Scholar · View at Scopus
  26. A. I. Selmy, A. M. El-Gohry, M. I. Abd El Aal, and M. A. Taha, “Characteristics of solid state recycling of aluminum alloy (AA6061) chips by hot extrusion,” in Proceedings of the International Conference of Engineering Sciences and Applications, vol. 1, pp. 316–323, Aswan, Egypt, 2016.
  27. A. I. Selmy, M. I. Abd El Aal, A. M. El-Gohry, and M. A. Taha, “Solid-state recycling of aluminum alloy (AA-6061) chips via hot extrusion followed by equal channel angular pressing (ECAP),” The Egyptian International Journal of Engineering Sciences and Technology, vol. 21, pp. 33–42, 2016. View at Google Scholar
  28. M. Hu, Z. Ji, X. Chen, and Z. Zhang, “Effect of chip size on mechanical property and microstructure of AZ91D magnesium alloy prepared by solid state recycling,” Materials Characterization, vol. 59, no. 4, pp. 385–389, 2008. View at Publisher · View at Google Scholar · View at Scopus