Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017, Article ID 5418769, 9 pages
https://doi.org/10.1155/2017/5418769
Research Article

Stochastic Effect of Grain Elongation on Nanocrystalline Materials Strain and Strain Rate Produced by Accumulative Roll-Bonding and Equal Channel Angular Pressing

1Department of Mechanical Engineering, Faculty of Engineering and Technology, Vaal University of Technology, Private Bag X021, Vanderbijlpark 1900, South Africa
2Department of Industrial Engineering and Operations Management, Faculty of Engineering and Technology, Vaal University of Technology, Private Bag X021, Vanderbijlpark 1900, South Africa

Correspondence should be addressed to P. Baonhe Sob; moc.liamtekcor@bos_ehnoab

Received 20 February 2017; Accepted 3 May 2017; Published 12 June 2017

Academic Editor: Paulo M. S. T. De Castro

Copyright © 2017 P. Baonhe Sob et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Y. Estrin and A. Vinogradov, “Extreme grain refinement by severe plastic deformation: a wealth of challenging science,” Acta Materialia, vol. 61, no. 3, pp. 782–817, 2013. View at Publisher · View at Google Scholar · View at Scopus
  2. M. Saravanan, R. M. Pillai, B. C. Pai, M. Brahmakumar, and K. R. Ravi, “Equal channel angular pressing of pure aluminium-an analysis,” Bulletin of Materials Science, vol. 29, no. 7, pp. 679–684, 2006. View at Google Scholar
  3. N. Tsuji, Y. Saito, S.-H. Lee, and Y. Minamino, “ARB (accumulative roll-bonding) and other new techniques to produce bulk ultrafine grained materials,” Advanced Engineering Materials, vol. 5, no. 5, pp. 338–344, 2003. View at Publisher · View at Google Scholar · View at Scopus
  4. A. Rosochowski, L. Olejnik, J. Richert, M. Rosochowska, and M. Richert, “Equal channel angular pressing with converging billets-experiment,” Materials Science and Engineering A, vol. 560, pp. 358–364, 2013. View at Publisher · View at Google Scholar · View at Scopus
  5. M. Hillert, “On the theory of normal and abnormal grain growth,” Acta Metallurgica, vol. 13, no. 3, pp. 227–238, 1965. View at Publisher · View at Google Scholar · View at Scopus
  6. T. B. Tengen, Analysis of Characteristic of Random Microstructures of Nanomaterials [PhD. Thesis], Witwatersrand Johannesburg, 2008.
  7. E. O. Hall, “The deformation and ageing of mild steel: III discussion of results,” Proceedings of the Physical Society Section B, vol. 64, no. 9, pp. 747–753, 1951. View at Publisher · View at Google Scholar · View at Scopus
  8. N. J. Petch, “The cleavage strength of polycrystasl,” Journal of the Iron and Steel Institute, vol. 174, pp. 25–28, 1953. View at Google Scholar
  9. M. Zhao and Q. Jiang, “Reverse hall-petch relationship of metals in nanometer size,” in Proceedings of the 2006 IEEE Conference on Emerging Technologies—Nanoelectronics, pp. 472–474, Singapore, January 2006. View at Publisher · View at Google Scholar · View at Scopus
  10. T. B. Tengen, T. Wejrzanowski, R. Iwankiewicz, and K. J. Kurzydlowski, “Stochastic modelling in design of mechanical properties of nanometals,” Materials Science and Engineering A, vol. 527, no. 16-17, pp. 3764–3768, 2010. View at Publisher · View at Google Scholar · View at Scopus
  11. M. Lewandowska, “Malgorzata lewandowska: fabrication methods of nanomaterials,” in Structure and Properties of Nanomaterials, pp. 1–54, 2006. View at Google Scholar
  12. W. A. Nash, Strength of Materials, McGraw-Hill, New York, NY, USA, 4th edition, 1998.
  13. P. B. Sob, A. A. Alugongo, and T. B. TengeN, “Stochastic effect of grain elongation on nanocrystalline material yield stress produced by accumulative roll bonding,” in Proceeding of the 9th South African Conference of Computational and Applied Mechanics (SACAM '14), Somerset West, South Africa, 2014.
  14. P. B. Sob, A. A. Alugongo, and T. B. Tengen, Modelling Strain Rate Sensitive Nanomaterials Mechanical Properties: The Effects of Varying Definition. MTECH, [MS thesis], Vaal University of Technology, Vanderbijlpark, South Africa, 2016.
  15. G. Wang and L. Xiaodong, “Predicting the young’s modulus of nanowire from first principle calculations on their surface and bulk materials,” Journal of Applied Physics, vol. 104, no. 11, Article ID 113517, pp. 1–33, 2008. View at Google Scholar
  16. K. M. Rahman, V. A. Vorontsov, and D. Dye, “The effect of grain size on the twin initiation stress in a TWIP steel,” Acta Materialia, vol. 89, pp. 247–257, 2015. View at Publisher · View at Google Scholar · View at Scopus
  17. L. S. Toth and C. Gu, “Ultrafine-grain metals by severe plastic deformation,” Materials Characterization, vol. 92, pp. 1–14, 2014. View at Publisher · View at Google Scholar · View at Scopus
  18. I. Sabirov, M. R. Barnett, Y. Estrin, and P. D. Hodgson, “The effect of strain rate on the deformation mechanisms and the strain rate sensitivity of an ultra-fine-grained Al alloy,” Scripta Materialia, vol. 61, no. 2, pp. 181–184, 2009. View at Publisher · View at Google Scholar · View at Scopus