Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017, Article ID 5812907, 9 pages
https://doi.org/10.1155/2017/5812907
Review Article

Deposition Methods for Microstructured and Nanostructured Coatings on Metallic Bone Implants: A Review

Department of Mechanical Engineering, The University of Memphis, Memphis, TN 38152, USA

Correspondence should be addressed to Ebrahim Asadi; moc.oohay@8idasae

Received 10 October 2016; Revised 11 December 2016; Accepted 21 December 2016; Published 9 January 2017

Academic Editor: Hongchao Kou

Copyright © 2017 Bailey Moore et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. P. Kuzyk and E. Schemitsch, “The basic science of peri-implant bone healing,” Indian Journal of Orthopaedics, vol. 45, no. 2, pp. 108–115, 2011. View at Publisher · View at Google Scholar
  2. A. F. Mavrogenis, R. Dimitriou, J. Parvizi, and G. C. Babis, “Biology of implant osseointegration,” Journal of Musculoskeletal Neuronal Interactions, vol. 9, no. 2, pp. 61–71, 2009. View at Google Scholar · View at Scopus
  3. T. Albrektsson, P.-I. Brånemark, H.-A. Hansson, and J. Lindström, “Osseointegrated titanium implants: requirements for ensuring a long-lasting, direct bone-to-implant anchorage in man,” Acta Orthopaedica Scandinavica, vol. 52, no. 2, pp. 155–170, 1981. View at Publisher · View at Google Scholar · View at Scopus
  4. F. Marco, F. Milena, G. Gianluca, and O. Vittoria, “Peri-implant osteogenesis in health and osteoporosis,” Micron, vol. 36, no. 7-8, pp. 630–644, 2005. View at Publisher · View at Google Scholar · View at Scopus
  5. A. Abdulkarim, P. Ellanti, N. Motterlini, T. Fahey, and J. M. O’Byrne, “Cemented versus uncemented fixation in total hip replacement: a systematic review and meta-analysis of randomized controlled trials,” Orthopedic Reviews, vol. 5, no. 1, 2013. View at Publisher · View at Google Scholar
  6. P.-I. Branemark, “Osseointegration and its experimental background,” The Journal of Prosthetic Dentistry, vol. 50, no. 3, pp. 399–410, 1983. View at Publisher · View at Google Scholar · View at Scopus
  7. R. Krishna Alla, K. Ginjupalli, N. Upadhya, M. Shammas, R. Krishna Ravi, and R. Sekhar, “Surface roughness of implants: a review,” Trends in Biomaterials and Artificial Organs, vol. 25, no. 3, pp. 112–118, 2011. View at Google Scholar · View at Scopus
  8. D. A. Puleo and A. Nanci, “Understanding and controlling the bone–implant interface,” Biomaterials, vol. 20, no. 23-24, pp. 2311–2321, 1999. View at Publisher · View at Google Scholar · View at Scopus
  9. G. S. Leventhal, “Titanium, a metal for surgery,” The Journal of bone and joint surgery. American volume, vol. 33, no. 2, pp. 473–474, 1951. View at Publisher · View at Google Scholar · View at Scopus
  10. R. Bothe, L. Beaton, and H. Davenport, “Reaction of bone to multiple metallic implants,” Surgery, Gynecology & Obstetrics, vol. 71, no. 6, pp. 598–602, 1940. View at Google Scholar
  11. J. E. Davies, “Bone bonding at natural and biomaterial surfaces,” Biomaterials, vol. 28, no. 34, pp. 5058–5067, 2007. View at Publisher · View at Google Scholar · View at Scopus
  12. V. Karageorgiou and D. Kaplan, “Porosity of 3D biomaterial scaffolds and osteogenesis,” Biomaterials, vol. 26, no. 27, pp. 5474–5491, 2005. View at Publisher · View at Google Scholar · View at Scopus
  13. C. Sittig, M. Textor, N. Spencer, M. Wieland, and P. Vallotton, “Surface characterization of implant materials c.p. Ti, Ti-6Al-4V with different pre-treatments,” Journal of Materials Science: Materials in Medicine, vol. 10, no. 1, pp. 35–46, 1999. View at Google Scholar
  14. N. Taniguchi, S. Fujibayashi, M. Takemoto et al., “Effect of pore size on bone ingrowth into porous titanium implants fabricated by additive manufacturing: an in vivo experiment,” Materials Science and Engineering C, vol. 59, pp. 690–701, 2016. View at Publisher · View at Google Scholar · View at Scopus
  15. A. Wennerberg and T. Albrektsson, “Effects of titanium surface topography on bone integration: a systematic review,” Clinical Oral Implants Research, vol. 20, no. 4, pp. 172–184, 2009. View at Publisher · View at Google Scholar · View at Scopus
  16. H. Zhou, R. Chernecky, and J. E. Davies, “Scanning electron microscopy of the osteoclast-bone interface in vivo,” Cells and Materials, vol. 3, no. 2, pp. 141–150, 1993. View at Google Scholar · View at Scopus
  17. P. K. Chu, J. Y. Chen, L. P. Wang, and N. Huang, “Plasma-surface modification of biomaterials,” Materials Science and Engineering: R: Reports, vol. 36, no. 5-6, pp. 143–206, 2002. View at Publisher · View at Google Scholar · View at Scopus
  18. P. Fauchais and A. Vardelle, “Solution and suspension plasma spraying of nanostructure coatings,” in Advanced Plasma Spray Applications, pp. 149–188, InTech, 2012. View at Google Scholar
  19. M. C. Kuo and S. K. Yen, “The process of electrochemical deposited hydroxyapatite coatings on biomedical titanium at room temperature,” Materials Science and Engineering: C, vol. 20, no. 1-2, pp. 153–160, 2002. View at Publisher · View at Google Scholar · View at Scopus
  20. T. Ling, J. Lin, J. Tu et al., “Mineralized collagen coatings formed by electrochemical deposition,” Journal of Materials Science: Materials in Medicine, vol. 24, no. 12, pp. 2709–2718, 2013. View at Publisher · View at Google Scholar · View at Scopus
  21. I. Gurrappa and L. Binder, “Electrodeposition of nanostructured coatings and their characterization—a review,” Science and Technology of Advanced Materials, vol. 9, no. 4, Article ID 043001, 2008. View at Publisher · View at Google Scholar · View at Scopus
  22. F. Z. Cui and Z. S. Luo, “Biomaterials modification by ion-beam processing,” Surface and Coatings Technology, vol. 112, no. 1-3, pp. 278–285, 1999. View at Publisher · View at Google Scholar · View at Scopus
  23. P. Sioshansi and E. J. Tobin, “Surface treatment of biomaterials by ion beam processes,” Surface and Coatings Technology, vol. 83, no. 1-3, pp. 175–182, 1996. View at Publisher · View at Google Scholar · View at Scopus
  24. G. Dearnaley and J. H. Arps, “Biomedical applications of diamond-like carbon (DLC) coatings: a review,” Surface and Coatings Technology, vol. 200, no. 7, pp. 2518–2524, 2005. View at Publisher · View at Google Scholar · View at Scopus
  25. R. Bosco, E. R. U. Edreira, J. G. C. Wolke, S. C. G. Leeuwenburgh, J. J. J. P. van den Beucken, and J. A. Jansen, “Instructive coatings for biological guidance of bone implants,” Surface and Coatings Technology, vol. 233, pp. 91–98, 2013. View at Publisher · View at Google Scholar · View at Scopus
  26. K. Balani, R. Anderson, T. Laha et al., “Plasma-sprayed carbon nanotube reinforced hydroxyapatite coatings and their interaction with human osteoblasts in vitro,” Biomaterials, vol. 28, no. 4, pp. 618–624, 2007. View at Publisher · View at Google Scholar · View at Scopus
  27. Y. Yang, K.-H. Kim, and J. L. Ong, “A review on calcium phosphate coatings produced using a sputtering process—an alternative to plasma spraying,” Biomaterials, vol. 26, no. 3, pp. 327–337, 2005. View at Publisher · View at Google Scholar · View at Scopus
  28. P. Cheang and K. A. Khor, “Addressing processing problems associated with plasma spraying of hydroxyapatite coatings,” Biomaterials, vol. 17, no. 5, pp. 537–544, 1996. View at Publisher · View at Google Scholar · View at Scopus
  29. A. Mahapatro, “Bio-functional nano-coatings on metallic biomaterials,” Materials Science and Engineering C, vol. 55, pp. 227–251, 2015. View at Publisher · View at Google Scholar · View at Scopus
  30. M. F. Morks, N. F. Fahim, and A. Kobayashi, “Structure, mechanical performance and electrochemical characterization of plasma sprayed SiO2/Ti-reinforced hydroxyapatite biomedical coatings,” Applied Surface Science, vol. 255, no. 5, pp. 3426–3433, 2008. View at Publisher · View at Google Scholar · View at Scopus
  31. W.-K. Lee, S.-M. Lee, and H.-M. Kim, “Effect of surface morphology of calcium phosphate on osteoblast-like HOS cell responses,” Journal of Industrial and Engineering Chemistry, vol. 15, no. 5, pp. 677–682, 2009. View at Publisher · View at Google Scholar · View at Scopus
  32. D. M. Dziedzic, I. H. Savva, D. S. Wilkinson, and J. E. Davies, “Osteoconduction on, and bonding to, calcium phosphate ceramic implants,” in Proceedings of the Material Research Society Symposium Proceeding, pp. 147–156, 1996.
  33. N. Sato, K. Kubo, M. Yamada et al., “Osteoblast mechanoresponses on Ti with different surface topographies,” Journal of Dental Research, vol. 88, no. 9, pp. 812–816, 2009. View at Publisher · View at Google Scholar · View at Scopus
  34. I. Wall, N. Donos, K. Carlqvist, F. Jones, and P. Brett, “Modified titanium surfaces promote accelerated osteogenic differentiation of mesenchymal stromal cells in vitro,” Bone, vol. 45, no. 1, pp. 17–26, 2009. View at Publisher · View at Google Scholar · View at Scopus
  35. K. Takatsuka, T. Yamamuro, T. Nakamura, and T. Kokubo, “Bone-bonding behavior of titanium alloy evaluated mechanically with detaching failure load,” Journal of Biomedical Materials Research, vol. 29, no. 2, pp. 157–163, 1995. View at Publisher · View at Google Scholar · View at Scopus
  36. D. Khang, J. Lu, C. Yao, K. M. Haberstroh, and T. J. Webster, “The role of nanometer and sub-micron surface features on vascular and bone cell adhesion on titanium,” Biomaterials, vol. 29, no. 8, pp. 970–983, 2008. View at Publisher · View at Google Scholar
  37. M. Sulzer, “An introduction to thermal spray,” Company Brochure, no. 5, pp. 1–24, 2012. View at Google Scholar
  38. H. Herman and R. A. Sulit, “Thermal spray coatings,” in ASM Handbook, vol. 6 of Welding, Brazing, Soldering, pp. 1004–1009, 1993. View at Google Scholar
  39. P. L. Fauchais, J. V. R. Heberlein, and M. I. Boulos, Thermal Spray Fundamentals, Springer, 2014.
  40. H. Fukanuma and N. Ohno, “A study of adhesive strength of cold spray coatings,” in Proceedings of the International Thermal Spray Conference, pp. 329–334, Osaka, Japan, May 2004. View at Scopus
  41. H. Guosheng and W. Hongren, “De-Laval-Type nozzle for cold spraying,” CN 101116849 B, May 2010.
  42. M. R. Hasniyati, H. Zuhailawati, and S. Ramakrishnan, “A statistical prediction of multiple responses using overlaid contour plot on hydroxyapatite coated magnesium via cold spray deposition,” Procedia Chem, vol. 19, pp. 181–188, 2016. View at Publisher · View at Google Scholar
  43. D. R. Marantz, “High-velocity flame spray apparatus and method of forming materials,” US 5019686 A, May 1991.
  44. T. C. Hanson, C. M. Hackett, and G. S. Settles, “Independent control of HVOF particle velocity and temperature,” Journal of Thermal Spray Technology, vol. 11, no. 1, pp. 75–85, 2002. View at Publisher · View at Google Scholar · View at Scopus
  45. K. A. Khor, H. Li, and P. Cheang, “Characterization of the bone-like apatite precipitated on high velocity oxy-fuel (HVOF) sprayed calcium phosphate deposits,” Biomaterials, vol. 24, no. 5, pp. 769–775, 2003. View at Publisher · View at Google Scholar · View at Scopus
  46. R. M. Poorman, H. B. Sargent, and L. Headlee, “Method and apparatus utilizing detonation waves for spraying and other purposes,” US Patent No. 2714563, 1955.
  47. M. Geetha, S. Sathish, K. Chava, and S. V. Joshi, “Detonation gun sprayed Al2O3–13TiO2 coatings for biomedical applications,” Surface Engineering, vol. 30, no. 4, pp. 229–236, 2014. View at Publisher · View at Google Scholar · View at Scopus
  48. R. Z. Legeros and R. G. Craig, “Strategies to affect bone remodeling: osteointegration,” Journal of Bone and Mineral Research, vol. 8, supplement 2, pp. S583–S596, 1993. View at Publisher · View at Google Scholar · View at Scopus
  49. D. M. Yenni, W. C. Mcgill, and J. W. Lyle, “Electric arc spraying,” US 2982845 A, May 1961.
  50. D. R. Marantz and K. A. Kowalsky, “High velocity electric-arc spray apparatus and method of forming materials,” US Patente 5442153, 1994.
  51. D. R. Marantz, K. A. Kowalsky, J. R. Baughman, and D. J. Cook, “Plasma transferred wire arc thermal spray apparatus and method,” US A, Article ID 5808270, p. 15, 1998. View at Google Scholar
  52. R. Wasserman, J. Quaas, J.-C. Chalard, L. Noel, and H.-T. Steine, “Installation for surfacing using plasma-arc welding,” US Patent 4125754, 1987.
  53. J. Ružić, M. Vilotijević, D. Božić, and K. Raić, “Understanding plasma spraying process and characteristics of DC-arc plasma gun (PJ-100),” Metallurgical & Materials Engineering, vol. 18, no. 4, pp. 273–282, 2012. View at Google Scholar
  54. R. d'Haese, L. Pawlowski, M. Bigan, R. Jaworski, and M. Martel, “Phase evolution of hydroxapatite coatings suspension plasma sprayed using variable parameters in simulated body fluid,” Surface and Coatings Technology, vol. 204, no. 8, pp. 1236–1246, 2010. View at Publisher · View at Google Scholar · View at Scopus
  55. Y. C. Yang, E. Chang, B. H. Hwang, and S. Y. Lee, “Biaxial residual stress states of plasma-sprayed hydroxyapatite coatings on titanium alloy substrate,” Biomaterials, vol. 21, no. 13, pp. 1327–1337, 2000. View at Publisher · View at Google Scholar · View at Scopus
  56. Y.-L. Chang, D. Lew, J. B. Park, and J. C. Keller, “Biomechanical and morphometric analysis of hydroxyapatite-coated implants with varying crystallinity,” Journal of Oral and Maxillofacial Surgery, vol. 57, no. 9, pp. 1096–1108, 1999. View at Publisher · View at Google Scholar · View at Scopus
  57. Y. Otsuka, H. Kawaguchi, and Y. Mutoh, “Cyclic delamination behavior of plasma-sprayed hydroxyapatite coating on Ti-6Al-4V substrates in simulated body fluid,” Materials Science and Engineering C, vol. 67, pp. 533–541, 2016. View at Publisher · View at Google Scholar · View at Scopus
  58. R. Hull and C. Ruebensaal, “Electroplating,” US Patent 2312097, 1943.
  59. K. Grandfield and I. Zhitomirsky, “Electrophoretic deposition of composite hydroxyapatite-silica-chitosan coatings,” Materials Characterization, vol. 59, no. 1, pp. 61–67, 2008. View at Publisher · View at Google Scholar
  60. Y.-J. Oh, S.-H. Chung, and M.-S. Lee, “Optimization of thickness uniformity in electrodeposition onto a patterned substrate,” Materials Transactions, vol. 45, no. 10, pp. 3005–3010, 2004. View at Publisher · View at Google Scholar · View at Scopus
  61. A. Yumoto, N. Niwa, F. Hiroki, and T. Yamamoto, “Physical vapor deposition apparatus and physical vapor deposition method,” US 20110189390 A1, August 2011.
  62. K. D. Kennedy, “Method of physical vapor deposition,” US Patent 3912826, 1975.
  63. A. Mubarak, E. Hamzah, and M. R. M. Toff, “Review of physical vapour deposition (PVD) techniques for hard coating,” J-Mek, vol. 20, no. 20, pp. 42–51, 2005. View at Google Scholar
  64. A. A. Snaper, “Arc deposition process and apparatus,” US Patent 3625848, 1971.
  65. D. M. Sanders and A. Anders, “Review of cathodic arc deposition technology at the start of the new millennium,” Surface and Coatings Technology, vol. 133-134, pp. 78–90, 2000. View at Publisher · View at Google Scholar · View at Scopus
  66. S. Onder, F. N. Kok, K. Kazmanli, and M. Urgen, “Magnesium substituted hydroxyapatite formation on (Ti,Mg)N coatings produced by cathodic arc PVD technique,” Materials Science and Engineering: C, vol. 33, no. 7, pp. 4337–4342, 2013. View at Publisher · View at Google Scholar · View at Scopus
  67. H. N. Takeshi Nakamura and S. Kato, “Magnetron sputtering apparatus,” US 4309266 A, January 1982.
  68. A. Mubarak, E. Hamzah, and M. R. M. Toff, “Review of physical vapour deposition (PVD) techniques for hard coating,” Jurnal Mekanikal, vol. 20, no. 20, pp. 42–51, 2005. View at Google Scholar
  69. F. Z. Cui, Z. S. Luo, and Q. L. Feng, “Highly adhesive hydroxyapatite coatings on titanium alloy formed by ion beam assisted deposition,” Journal of Materials Science: Materials in Medicine, vol. 8, no. 7, pp. 403–405, 1997. View at Publisher · View at Google Scholar · View at Scopus
  70. I. Nakayama, A. Suzuki, Y. Kusumoto, K. Takakuwa, and T. Ikuta, “Method of forming a thin film by chemical vapor deposition,” US 4800105 A, January 1989.
  71. G. Giavaresi, L. Ambrosio, G. A. Battiston et al., “Histomorphometric, ultrastructural and microhardness evaluation of the osseointegration of a nanostructured titanium oxide coating by metal-organic chemical vapour deposition: an in vivo study,” Biomaterials, vol. 25, no. 25, pp. 5583–5591, 2004. View at Publisher · View at Google Scholar · View at Scopus
  72. H.-C. Choe, “Photofunctionalization of EB-PVD HA-coated nano-pore surface of Ti-30Nb-xZr alloy for dental implants,” Surface and Coatings Technology, vol. 228, no. 1, pp. S470–S476, 2013. View at Publisher · View at Google Scholar · View at Scopus
  73. Y.-H. Jeong, B.-H. Moon, H.-C. Choe, and W. A. Brantley, “Surface characteristics of hydroxyapatite-coated layer prepared on nanotubular Ti-35Ta-xHf alloys by EB-PVD,” Thin Solid Films, vol. 549, pp. 147–153, 2013. View at Publisher · View at Google Scholar · View at Scopus
  74. Y. Liu, Y.-Y. Wang, G.-J. Yang, J.-J. Feng, and K. Kusumoto, “Effect of nano-sized TiN additions on the electrical properties of vacuum cold sprayed SiC coatings,” Journal of Thermal Spray Technology, vol. 19, no. 6, pp. 1238–1243, 2010. View at Publisher · View at Google Scholar · View at Scopus
  75. F. Cao, H. Park, G. Bae, J. Heo, and C. Lee, “Microstructure evolution of titanium nitride film during vacuum kinetic spraying,” Journal of the American Ceramic Society, vol. 96, no. 1, pp. 40–43, 2013. View at Publisher · View at Google Scholar · View at Scopus
  76. D. Hanft, J. Exner, M. Schubert, T. Stöcker, P. Fuierer, and R. Moos, “An overview of the Aerosol Deposition method: process fundamentals and new trends in materials applications,” Journal of Ceramic Science and Technology, vol. 6, no. 3, pp. 147–181, 2015. View at Publisher · View at Google Scholar · View at Scopus
  77. C. Boissiere, D. Grosso, A. Chaumonnot, L. Nicole, and C. Sanchez, “Aerosol route to functional nanostructured inorganic and hybrid porous materials,” Advanced Materials, vol. 23, no. 5, pp. 599–623, 2011. View at Publisher · View at Google Scholar · View at Scopus
  78. B.-D. Hahn, D.-S. Park, J.-J. Choi et al., “Effect of the HA/β-TCP ratio on the biological performance of calcium phosphate ceramic coatings fabricated by a room-temperature powder spray in vacuum,” Journal of the American Ceramic Society, vol. 92, no. 4, pp. 793–799, 2009. View at Publisher · View at Google Scholar · View at Scopus
  79. B.-D. Hahn, Y.-L. Cho, D.-S. Park et al., “Effect of fluorine addition on the biological performance of hydroxyapatite coatings on Ti by aerosol deposition,” Journal of Biomaterials Applications, vol. 27, no. 5, pp. 587–594, 2013. View at Publisher · View at Google Scholar · View at Scopus
  80. M. Kubo, Y. Ishihara, Y. Mantani, and M. Shimada, “Evaluation of the factors that influence the fabrication of porous thin films by deposition of aerosol nanoparticles,” Chemical Engineering Journal, vol. 232, pp. 221–227, 2013. View at Publisher · View at Google Scholar · View at Scopus