Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017, Article ID 5824171, 14 pages
https://doi.org/10.1155/2017/5824171
Research Article

SPR Characteristics Curve and Distribution of Residual Stress in Self-Piercing Riveted Joints of Steel Sheets

1Faculty of Science, Health, Education and Engineering, University of the Sunshine Coast, Sippy Downs, QLD 4556, Australia
2Faculty of Science, Engineering and Technology, Swinburne University of Technology, Hawthorn, VIC 3122, Australia
3Australian Nuclear Science and Technology Organisation, Lucas Heights, NSW 2234, Australia
4Henrob (UK) Pty Ltd, Geebung, QLD 4034, Australia

Correspondence should be addressed to Rezwanul Haque; ua.ude.csu@euqahr

Received 10 October 2016; Revised 25 November 2016; Accepted 4 December 2016; Published 15 February 2017

Academic Editor: Paolo Ferro

Copyright © 2017 Rezwanul Haque et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Rezwanul Haque, Yat C. Wong, Anna Paradowska, Stuart Blacket, and Yvonne Durandet, “SPR Characteristics Curve and Distribution of Residual Stress in Self-Piercing Riveted Joints of Steel Sheets,” Advances in Materials Science and Engineering, vol. 2017, Article ID 5824171, 14 pages, 2017. https://doi.org/10.1155/2017/5824171.