Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017, Article ID 5845149, 8 pages
https://doi.org/10.1155/2017/5845149
Research Article

Experimental Study on Friction Sliding Performance of Rubber Bearings in Bridges

School of Civil Engineering, North China University of Technology, Beijing 100144, China

Correspondence should be addressed to Yue Li; moc.361@62_euyil

Received 11 March 2017; Accepted 5 April 2017; Published 18 April 2017

Academic Editor: Eric Maire

Copyright © 2017 Yue Li and Qiqi Wu. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. L. C. Fan and J. Z. Li, “Analysis of seismic damage and anti-seismic design measures on bridges in Wenchuan,” Highway, vol. 5, pp. 122–128, 2009. View at Google Scholar
  2. K. Kawashima, “Seismic design and retrofit of bridge,” in Proceedings of the 12th World Conference on Earthquake Engineering, pp. 280–291, 2000.
  3. A. Fäcke, M. Baur, and F. H. Schlüter, “Assessment of bridge performance—seismic isolation versus ductility,” in Proceedings of the 14th World Conference on Earthquake Engineering, pp. 560–579, 2008.
  4. H. Iemura, A. Miyamoto, and Y. Akahashi, “Influence of failure of steel bearings on damage modes of bridges under strong Earthquake motion,” Journal of Structural Engineering, vol. 44A, pp. 659–666, 1998. View at Google Scholar
  5. Y. Kajita, E. Watanabe, and K. Sugiura, “Seismic response of elevated bridges considering the failure of steel bridges and assessment on effectiveness of fall-off prevention devices,” Journal of Structural Engineering, vol. 23, pp. 903–914, 1999. View at Google Scholar
  6. M. OkazaiI, H. Tsuda, and M. Dogaki, “Seismic response of continuous bridges supported by seismic isolation bearings in consideration of collision between girders,” Journal of Structural Engineering, vol. 48A, pp. 899–907, 2002. View at Google Scholar
  7. S.-H. Kim, H.-S. Mha, and S.-W. Lee, “Effects of bearing damage upon seismic behaviors of a multi-span girder bridge,” Engineering Structures, vol. 28, no. 7, pp. 1071–1080, 2006. View at Publisher · View at Google Scholar · View at Scopus
  8. J. F. Stanton and C. W. Roeder, “Elastomeric bearings design, construction, and materials,” National Cooperative Highway Research Program 248, Washington, DC, USA, Transportation Research Board, National Research Council, 1982.
  9. I. Schrage, Anchoring of Bearing by Friction (Special Publication SP70-12), American Concrete Institute (ACI), Detroit, Mich, USA, 1981.
  10. A. Mori, P. J. Moss, N. Cooke, and A. J. Carr, “The behavior of bearings used for seismic isolation under shear and axial load,” Earthquake Spectra, vol. 15, no. 2, pp. 199–224, 1999. View at Publisher · View at Google Scholar · View at Scopus
  11. E. T. Filipov, J. F. Hajjar, J. S. Steelman, L. A. Fahnestock, J. M. Lafave, and D. A. Foutch, “Computational analyses of quasi-isolated bridges with fusing bearing components,” in Inproceedings of the Structures Congress 2011, pp. 276–288, April 2011. View at Publisher · View at Google Scholar · View at Scopus
  12. J. S. Steelman, L. A. Fahnestock, J. M. Lafave, J. F. Hajjar, E. T. Filipov, and D. A. Foutch, “Seismic response of bearings for quasi-isolated bridges- Testing and component modeling,” in Inproceedings of the Structures Congress 2011, pp. 164–178, April 2011. View at Publisher · View at Google Scholar · View at Scopus
  13. J. S. Steelman, L. A. Fahnestock, E. T. Filipov, J. M. Lafave, J. F. Hajjar, and D. A. Foutch, “Shear and friction response of nonseismic laminated elastomeric bridge bearings subject to seismic demands,” Journal of Bridge Engineering, vol. 18, no. 7, pp. 612–623, 2013. View at Publisher · View at Google Scholar · View at Scopus
  14. I. Buckle, S. Nagarajaiah, and K. Ferrell, “Stability of elastomeric isolation bearings: experimental study,” Journal of Structural Engineering, vol. 128, no. 1, pp. 3–11, 2002. View at Publisher · View at Google Scholar · View at Scopus
  15. H. Tang and J. Z. Li, “Displacement control method for continuous bridges on laminated rubber bearings under earthquake excitation,” China Journal of Highway and Transport, vol. 26, pp. 110–116, 2013. View at Google Scholar
  16. L. C. Fan, L. Y. Nie, and J. Z. Li, “Dynamic characteristic analysis of laminated rubber bearing sliding under earthquake,” China Journal of Highway and Transport, vol. 16, pp. 30–35, 2003. View at Google Scholar
  17. D. S. Wang and Q. M. Feng, “Effects of frictional force at movable supports on earthquake response of simply supported reinforced concrete bridges,” Earthquake Engineering and Engineering Vibration, vol. 18, pp. 30–39, 1998. View at Google Scholar
  18. D. S. Wang, X. Guo, and Z. G. Sun, “Damage to highway bridges during Wenchuan Earthquake,” Journal of Earthquake and Engineering Vibration, vol. 29, pp. 84–94, 2009. View at Google Scholar
  19. X. Xie and S. X. Wu, “Earthquake response of bridge restrainers considering failure of bearings,” Journal of Zhejiang University, vol. 40, pp. 2180–2185, 2009. View at Google Scholar
  20. Y. Huang, J. J. Wang, and P. Han, “Seismic response analysis of continuous bridges taking account of bearing failure,” China Civil Engineering Journal, vol. 43, pp. 217–223, 2009. View at Google Scholar
  21. Ministry of Transport of People Republic of China, Series of Elastomeric Pad Bearings for Highway Bridges (JT/T 663-2006), China Communications Press, Beijing, China, 2007.