Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017, Article ID 6068286, 7 pages
https://doi.org/10.1155/2017/6068286
Research Article

Coal Bottom Ash for Portland Cement Production

1Civil Engineering School, Polytechnic University of Madrid, C/Profesor Aranguren, s/n, Ciudad Universitaria, 28040 Madrid, Spain
2Spanish Institute of Cement and Its Applications (IECA), C/José Abascal 53, 28003 Madrid, Spain
3Eduardo Torroja Institute for Construction Science, CSIC, C/Serrano Galvache 4, 28033 Madrid, Spain

Correspondence should be addressed to Miguel Ángel Sanjuán; se.acei@naujnasam

Received 12 January 2017; Revised 25 May 2017; Accepted 21 June 2017; Published 30 July 2017

Academic Editor: Giorgio Pia

Copyright © 2017 Cristina Argiz et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. European Parliament, European Waste Framework Directive, 2008.
  2. “CEMBUREAU, the European Cement Association,” Activity Report, 2015.
  3. M. A. Sanjuán and C. Argiz, “Cement standardization: standardization evolution with regard to the industrial by-product use as cement constituent,” Cemento & Concreto de Iberoamérica y el Caribe, vol. 2, pp. 90–99, 2015. View at Google Scholar · View at MathSciNet
  4. M. I. Khan, “Evaluation of non-destructive testing of high strength concrete incorporating supplementary cementitious composites,” Resources, Conservation and Recycling, vol. 61, pp. 125–129, 2012. View at Publisher · View at Google Scholar
  5. C. Argiz, E. Menéndez, A. Moragues, and M. A. Sanjuán, “Fly ash characteristics of Spanish coal-fired power plants,” Afinidad, vol. 72, pp. 269–277, 2015. View at Google Scholar
  6. L. D. Poulikakos, C. Papadaskalopoulou, B. Hofko et al., “Harvesting the unexplored potential of european waste materials for road construction,” Resources, Conservation and Recycling, vol. 116, pp. 32–44, 2017. View at Publisher · View at Google Scholar
  7. M. Singh and R. Siddique, “Effect of coal bottom ash as partial replacement of sand on properties of concrete,” Resources, Conservation and Recycling, vol. 72, pp. 20–32, 2013. View at Publisher · View at Google Scholar
  8. J. Y. Park, “Assessing determinants of industrial waste reuse: The case of coal ash in the United States,” Resources, Conservation and Recycling, vol. 92, pp. 116–127, 2014. View at Publisher · View at Google Scholar
  9. M. Á. Sanjuán, C. Argiz, J. C. Gálvez, and A. Moragues, “Effect of silica fume fineness on the improvement of Portland cement strength performance,” Construction and Building Materials, vol. 96, pp. 55–64, 2015. View at Publisher · View at Google Scholar · View at Scopus
  10. K. Kiattikomol, C. Jaturapitakkul, S. Songpiriyakij, and S. Chutubtim, “A study of ground coarse fly ashes with different finenesses from various sources as pozzolanic materials,” Cement and Concrete Composites, vol. 23, no. 4-5, pp. 335–343, 2001. View at Publisher · View at Google Scholar · View at Scopus
  11. P. Chindaprasirt, S. Homwuttiwong, and V. Sirivivatnanon, “Influence of fly ash fineness on strength, drying shrinkage and sulfate resistance of blended cement mortar,” Cement and Concrete Research, vol. 34, no. 7, pp. 1087–1092, 2004. View at Publisher · View at Google Scholar · View at Scopus
  12. B. Felekoǧlu, S. Türkel, and H. Kalyoncu, “Optimization of fineness to maximize the strength activity of high-calcium ground fly ash—Portland cement composites,” Construction and Building Materials, vol. 23, no. 5, pp. 2053–2061, 2009. View at Publisher · View at Google Scholar · View at Scopus
  13. M. A. Sanjuán and C. Argiz, “La nueva norma europea de especificaciones de cementos comunes UNE-EN 197-1:2011,” Materiales de Construcción, vol. 62, no. 307, pp. 425–430, 2012. View at Publisher · View at Google Scholar
  14. CEN European Committee for Standardization, Methods of Testing of Cement: Part 1. Determination of Strength, The European Standard EN 196-1, CEN, Brussels, Belgium, 2016.
  15. CEN European Committee for Standardization, Methods of Testing of Cement: Part 3. Determination of Setting Time and Soundness. The European Standard EN 196-3, CEN, Brussels, Belgium, 2011.
  16. M. Murat and F. Sorrentino, “Effect of large additions of Cd, Pb, Cr, Zn, to cement raw meal on the composition and the properties of the clinker and the cement,” Cement and Concrete Research, vol. 26, no. 3, pp. 377–385, 1996. View at Publisher · View at Google Scholar · View at Scopus