Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017 (2017), Article ID 6157869, 7 pages
https://doi.org/10.1155/2017/6157869
Research Article

Utilization of Foaming Technology in Cemented Paste Backfill of High-Mud Superfine Unclassified Tailings

1School of Resources and Safety Engineering, Central South University, Changsha 410083, China
2State Key Laboratory of Coal Mine Disaster Dynamics and Control, College of Resources and Environmental Science, Chongqing University, Chongqing 400030, China

Correspondence should be addressed to Shuai Li; moc.361@02462800251

Received 13 June 2017; Accepted 6 September 2017; Published 10 October 2017

Academic Editor: Marino Lavorgna

Copyright © 2017 Jian-wen Zhao et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. R.-J. Jewell and A.-B. Fourie, Paste and Thickened Tailings: A Guide- Australian Centre for Geomechanics, ACG, Perth, Australia, 2nd edition, 2006.
  2. S. Li and X.-M. Wang, “Fly-ash-based magnetic coagulant for rapid sedimentation of electronegative slimes and ultrafine tailings,” Powder Technology, vol. 303, pp. 20–26, 2016. View at Publisher · View at Google Scholar · View at Scopus
  3. J. Qiu, L. Yang, X. Sun, J. Xing, and S. Li, “Strength characteristics and failure mechanism of cemented super-fine unclassified tailings backfill,” Minerals, vol. 7, no. 4, 58 pages, 2017. View at Publisher · View at Google Scholar
  4. C.-Y. Xu, T.-C. Sun, J. Kou, Y.-L. Li, X.-L. Mo, and L.-G. Tang, “Mechanism of phosphorus removal in beneficiation of high phosphorous oolitic hematite by direct reduction roasting with dephosphorization agent,” Transactions of Nonferrous Metals Society of China, vol. 22, no. 11, pp. 2806–2812, 2012. View at Publisher · View at Google Scholar · View at Scopus
  5. A. Kesimal, B. Ercikdi, and E. Yilmaz, “The effect of desliming by sedimentation on paste backfill performance,” Minerals Engineering, vol. 16, no. 10, pp. 1009–1011, 2003. View at Publisher · View at Google Scholar · View at Scopus
  6. Y. Huang, G. Han, J. Liu, and W. Wang, “A facile disposal of Bayer red mud based on selective flocculation desliming with organic humics,” Journal of Hazardous Materials, vol. 301, pp. 46–55, 2016. View at Publisher · View at Google Scholar · View at Scopus
  7. F. Cihangir, B. Ercikdi, A. Kesimal, A. Turan, and H. Deveci, “Utilisation of alkali-activated blast furnace slag in paste backfill of high-sulphide mill tailings: effect of binder type and dosage,” Minerals Engineering, vol. 30, pp. 33–43, 2012. View at Publisher · View at Google Scholar · View at Scopus
  8. X. Tian, Q. Li, Z. Lu, and Z. Wang, “Experimental study of blast mitigation by foamed concrete,” International Journal of Protective Structures, vol. 7, no. 2, pp. 179–192, 2016. View at Publisher · View at Google Scholar · View at Scopus
  9. S. Xu, F. T. Suorineni, K. Li, and Y. Li, “Evaluation of the strength and ultrasonic properties of foam-cemented paste backfill,” International Journal of Mining, Reclamation and Environment, pp. 1–14, 2016. View at Publisher · View at Google Scholar · View at Scopus
  10. Y. Zhou, H. Deng, and J. Liu, “Rational utilization of fine unclassified tailings and activated blast furnace slag with high calcium,” Minerals, vol. 7, no. 4, article no. 48, 2017. View at Publisher · View at Google Scholar · View at Scopus
  11. Z. Zhang, J. L. Provis, A. Reid, and H. Wang, “Mechanical, thermal insulation, thermal resistance and acoustic absorption properties of geopolymer foam concrete,” Cement & Concrete Composites, vol. 62, pp. 97–105, 2015. View at Publisher · View at Google Scholar · View at Scopus
  12. H.-S. Lee, M. A. Ismail, Y.-J. Woo, T.-B. Min, and H.-K. Choi, “Fundamental study on the development of structural lightweight concrete by using normal coarse aggregate and foaming agent,” Materials, vol. 7, no. 6, pp. 4536–4554, 2014. View at Publisher · View at Google Scholar · View at Scopus
  13. E. Kuzielová, L. Pach, and M. Palou, “Effect of activated foaming agent on the foam concrete properties,” Construction and Building Materials, vol. 125, pp. 998–1004, 2016. View at Publisher · View at Google Scholar
  14. R.-P. Chhabra and J.-F. Richardson, Non-Newtonian Flow and Applied Rheology: Engineering Applications, Butterworth-Heinemann, Oxford, UK, 2008.
  15. R.-I. Tanner, Engineering Rheology, Oxford University Press, NY, USA, 1986.
  16. X.-M. Wang, J.-W. Zhao, J.-H. Xue, and G.-F. Yu, “Features of pipe transportation of paste-like backfilling in deep mine,” Journal of Central South University of Technology, vol. 18, no. 5, pp. 1413–1417, 2011. View at Publisher · View at Google Scholar · View at Scopus
  17. Q. Chen, Q. Zhang, X. Wang, C. Xiao, and Q. Hu, “A hydraulic gradient model of paste-like crude tailings backfill slurry transported by a pipeline system,” Environmental Earth Sciences, vol. 75, no. 14, article no. 1099, 2016. View at Publisher · View at Google Scholar · View at Scopus
  18. D. Wu, M. Fall, and S. J. Cai, “Coupling temperature, cement hydration and rheological behaviour of fresh cemented paste backfill,” Minerals Engineering, vol. 42, pp. 76–87, 2013. View at Publisher · View at Google Scholar · View at Scopus
  19. K.-P. Zhou, R. Gao, and F. Gao, “Particle flow characteristics and transportation optimization of superfine unclassified backfilling,” Minerals, vol. 7, no. 1, article no. 6, 2017. View at Publisher · View at Google Scholar · View at Scopus