Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017, Article ID 6274054, 11 pages
https://doi.org/10.1155/2017/6274054
Research Article

Feasibility of Residual Stress Nondestructive Estimation Using the Nonlinear Property of Critical Refraction Longitudinal Wave

1Institute of Light Industry and Food Engineering, Guangxi University, Nanning 530004, China
2College of Mechanical Engineering, Guangxi University, Nanning 530004, China
3Hunan Province Key Laboratory of Safety Design and Reliability Technology for Engineering Vehicle, Changsha University of Science & Technology, Changsha 410004, China
4School of Automobile and Transportation, Guangxi University of Science and Technology, Liuzhou 545006, China

Correspondence should be addressed to Han-Ling Mao; nc.ude.uxg@97lhoam and Han-Ying Mao; moc.anis@6155002yhm

Received 7 June 2017; Revised 9 October 2017; Accepted 22 October 2017; Published 14 November 2017

Academic Editor: Donato Sorgente

Copyright © 2017 Yu-Hua Zhang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. N. Rossini, M. Dassisti, K. Benyounis, and A. Olabi, “Methods of measuring residual stresses in components,” Materials and Design, vol. 35, pp. 572–588, 2012. View at Publisher · View at Google Scholar
  2. X. Huang, Z. Liu, and H. Xie, “Recent progress in residual stress measurement techniques,” Acta Mechanica Solida Sinica, vol. 26, no. 6, pp. 570–583, 2013. View at Publisher · View at Google Scholar · View at Scopus
  3. C. Sarioglu, U. Demirler, M. K. Kazmanli, and M. Urgen, “Measurement of residual stresses by X-ray diffraction techniques in MoN and Mo2N coatings deposited by arc PVD on high-speed steel substrate,” Surface and Coatings Technology, vol. 190, no. 2-3, pp. 238–243, 2005. View at Publisher · View at Google Scholar · View at Scopus
  4. F. Takali, A. Njeh, H. Fuess, and M. H. Ben Ghozlen, “X-ray diffraction measurement of residual stress in epitaxial ZnO/α-Al2O3 thin film,” Mechanics Research Communications, vol. 38, no. 3, pp. 186–191, 2011. View at Publisher · View at Google Scholar · View at Scopus
  5. K. J. U. M. Y. Kudryavtsev, “Ultrasonic measurement of residual stresses,” Structural Materials Technology Iv-an Ndt Conference, pp. 213–218, 2000. View at Google Scholar
  6. G. Pitarresi and E. A. Patterson, “A review of the general theory of thermoelastic stress analysis,” Journal of Strain Analysis for Engineering Design, vol. 38, pp. 405–417, 2003. View at Publisher · View at Google Scholar
  7. A. F. Robinson, Assessment of Residual Stress using Thermoelastic Stress Analysis, University of Southampton, 2011, Doctor Type.
  8. J. M. Dulieu-Barton and P. Stanley, “Development and applications of thermoelastic stress analysis,” Journal of Strain Analysis for Engineering Design, vol. 33, no. 2, pp. 93–104, 1998. View at Publisher · View at Google Scholar · View at Scopus
  9. A. L. Gyekenyesi and G. Y. Baaklini, “Thermoelastic stress analysis: the mean stress effect in metallic alloys,” in Proceedings of the Nondestructive Evaluation Techniques for Aging Infrastructures and Manufacturing, pp. 142–151, Newport Beach, CA, USA, 1999. View at Publisher · View at Google Scholar
  10. A. L. Gyekenyesi and G. Y. Baaklini, “Quantifying residual stresses by means of thermoelastic stress analysis,” in Proceedings of the SPIE's 5th Annual International Symposium on Nondestructive Evaluation and Health Monitoring of Aging Infrastructure, pp. 78–91, Newport Beach, CA, USA, 2000. View at Publisher · View at Google Scholar
  11. V. K. Zhukovskii and A. R. Gokhman, “Relation between a linear thermal expansion coefficient and residual stresses,” Technical Physics, vol. 54, Article ID S1063784209040148, pp. 535–541, 2009. View at Publisher · View at Google Scholar
  12. W. Song, C. Xu, Q. Pan, and J. Song, “Nondestructive testing and characterization of residual stress field using an ultrasonic method,” Chinese Journal of Mechanical Engineering, vol. 29, no. 2, pp. 365–371, 2016. View at Publisher · View at Google Scholar · View at Scopus
  13. W. Sun and C. Xu, “Residual stress field nondestructive testing and characterization using method of ultrasonic,” Machinery design and manufacture, pp. 9–12, 2015. View at Google Scholar
  14. C. Xu, J. Song, W. Song, J. Wang, and H. Tian, “Ultrasonic nondestructive testing and regulation technology of residual stress,” in Proceedings of the 19th World Conference on Non-Destructive Testing, pp. 1–9, 2016.
  15. W. Song, Study on Technology of Ultrasonic Nondestructive Testing and Regulation of Residual Stress, Doctor Type, Beijing Institute of Technology, Beijing, China, 2016.
  16. D. E. Bray, “Ultrasonic stress measurement and material characterization in pressure vessels, piping, and welds,” Journal of Pressure Vessel Technology, vol. 124, no. 3, pp. 326–335, 2002. View at Publisher · View at Google Scholar · View at Scopus
  17. S. V. Walker, J. Kim, J. Qu, and L. J. Jacobs, “Fatigue damage evaluation in A36 steel using nonlinear Rayleigh surface waves,” NDTE Int, vol. 48, pp. 10–15, 2012. View at Publisher · View at Google Scholar
  18. J. Zhang, S. Li, F. Z. Xuan, and F. Yang, “Effect of plastic deformation on nonlinear ultrasonic response of austenitic stainless steel,” Materials Science and Engineering A, vol. 622, pp. 146–152, 2015. View at Publisher · View at Google Scholar
  19. A. Hikata, R. Truell, A. Granato, B. Chick, and K. Lücke, “Sensitivity of ultrasonic attenuation and velocity changes to plastic deformation and recovery in aluminum,” Journal of Applied Physics, vol. 27, no. 4, pp. 396–404, 1956. View at Publisher · View at Google Scholar
  20. J. H. Cantrell, “Substructural organization, dislocation plasticity and harmonic generation in cyclically stressed wavy slip metals,” Proceedings of the Royal Society A Mathematical, Physical and Engineering Sciences, vol. 460, no. 2043, pp. 757–780, 2004. View at Publisher · View at Google Scholar · View at Scopus
  21. I. Bartoli, C. Nucera, A. Srivastava et al., “Nonlinear ultrasonic guided waves for stress monitoring in prestressing tendons for post-tensioned concrete structures,” European Workshop on Structural Health Monitoring. International Society for Optics and Photonics, pp. 258–263, 2009. View at Publisher · View at Google Scholar
  22. M. Liu, J. Kim, L. Jacobs, and J. Qu, “Experimental study of nonlinear Rayleigh wave propagation in shot-peened aluminum plates—Feasibility of measuring residual stress,” NDTE and Int, vol. 44, pp. 67–74, 2011. View at Publisher · View at Google Scholar
  23. G. J. Kim, S. J. Park, and H. G. Kwak, “Application of nonlinear ultrasonic method for monitoring of stress state in concrete,” Journal of the Korean Society for Nondestructive Testing, vol. 36, no. 2, pp. 121–129, 2016. View at Publisher · View at Google Scholar
  24. Y. Xiang, W. Zhu, M. Deng, and F. Xuan, “Experimental and numerical studies of nonlinear ultrasonic responses on plastic deformation in weld joints,” Chinese Physics B, vol. 25, no. 2, p. 024303, 2016. View at Publisher · View at Google Scholar
  25. G. Shui, Y. Wang, and F. Gong, “Evaluation of plastic damage for metallic materials under tensile load using nonlinear longitudinal waves,” NDTE and Int, vol. 55, pp. 1–8, 2013. View at Publisher · View at Google Scholar
  26. J. Y. Kim, J. Qu, L. J. Jacobs, J. W. Littles, and M. F. Savage, “Acoustic nonlinearity parameter due to micro-plasticity,” Journal of Nondestructive Evaluation, vol. 25, no. 1, pp. 28–36, 2006. View at Publisher · View at Google Scholar