Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017 (2017), Article ID 6913835, 10 pages
https://doi.org/10.1155/2017/6913835
Research Article

Dielectric Properties of 3D Printed Polylactic Acid

Experimental Physics V, Center for Electronic Correlations and Magnetism, University of Augsburg, 86159 Augsburg, Germany

Correspondence should be addressed to Stephan Krohns; ed.grubsgua-inu.kisyhp@snhork.nahpets

Received 3 April 2017; Revised 30 May 2017; Accepted 18 June 2017; Published 17 July 2017

Academic Editor: Marino Lavorgna

Copyright © 2017 Claudius Dichtl et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Claudius Dichtl, Pit Sippel, and Stephan Krohns, “Dielectric Properties of 3D Printed Polylactic Acid,” Advances in Materials Science and Engineering, vol. 2017, Article ID 6913835, 10 pages, 2017. doi:10.1155/2017/6913835