Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017, Article ID 7210591, 6 pages
https://doi.org/10.1155/2017/7210591
Research Article

Effect of High-Temperature Curing Methods on the Compressive Strength Development of Concrete Containing High Volumes of Ground Granulated Blast-Furnace Slag

1School of Mechanical Engineering, Chungnam National University, Daejeon, Republic of Korea
2Department of Architectural Engineering, Wonkwang University, 460 Iksan-daero, Iksan 54538, Republic of Korea

Correspondence should be addressed to Se-Jin Choi; rk.ca.ukw@8732jsc

Received 17 March 2017; Accepted 27 June 2017; Published 26 July 2017

Academic Editor: Xiao-Yong Wang

Copyright © 2017 Wonsuk Jung and Se-Jin Choi. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Korea Concrete Institute, “Concrete & Environment,” vol.2, Kimoondang, Seoul, Korea, 2016.
  2. K. M. Lee, H. K. Lee, S. H. Lee, and G. Y. Kim, “Autogenous shrinkage of concrete containing granulated blast-furnace slag,” Cement and Concrete Research, vol. 36, no. 7, pp. 1279–1285, 2006. View at Publisher · View at Google Scholar · View at Scopus
  3. S.-J. Choi and Y.-S. Jeon, “The Fluidity and Hardened Properties of Eco-Friendly Low Cement Concrete with 3 Types of Binders,” Journal of the Architectural Institute of Korea Structure & Construction, vol. 31, no. 11, pp. 63–70, 2015. View at Publisher · View at Google Scholar
  4. H. Yazıcı, “The effect of curing conditions on compressive strength of ultra high strength concrete with high volume mineral admixtures,” Building and Environment, vol. 42, no. 5, pp. 2083–2089, 2007. View at Publisher · View at Google Scholar · View at Scopus
  5. M.-H. Zhang and J. Islam, “Use of nano-silica to reduce setting time and increase early strength of concretes with high volumes of fly ash or slag,” Construction and Building Materials, vol. 29, no. 4, pp. 573–580, 2012. View at Publisher · View at Google Scholar · View at Scopus
  6. S.-J. Choi, J.-S. Mun, K.-H. Yang, and S.-J. Kim, “Compressive fatigue performance of fiber-reinforced lightweight concrete with high-volume supplementary cementitious materials,” Cement and Concrete Composites, vol. 73, pp. 89–97, 2016. View at Publisher · View at Google Scholar · View at Scopus
  7. G. Hannesson, K. Kuder, R. Shogren, and D. Lehman, “The influence of high volume of fly ash and slag on the compressive strength of self-consolidating concrete,” Construction and Building Materials, vol. 30, pp. 161–168, 2012. View at Publisher · View at Google Scholar · View at Scopus
  8. K. H. Mo, U. Johnson Alengaram, M. Z. Jumaat, and S. P. Yap, “Feasibility study of high volume slag as cement replacement for sustainable structural lightweight oil palm shell concrete,” Journal of Cleaner Production, vol. 91, pp. 297–304, 2015. View at Publisher · View at Google Scholar · View at Scopus
  9. I. Papayianni and E. Anastasiou, “Production of high-strength concrete using high volume of industrial by-products,” Construction and Building Materials, vol. 24, no. 8, pp. 1412–1417, 2010. View at Publisher · View at Google Scholar · View at Scopus
  10. S. J. Barnett, M. N. Soutsos, S. G. Millard, and J. H. Bungey, “Strength development of mortars containing ground granulated blast-furnace slag: effect of curing temperature and determination of apparent activation energies,” Cement and Concrete Research, vol. 36, no. 3, pp. 434–440, 2006. View at Publisher · View at Google Scholar · View at Scopus
  11. T. Miura and I. Iwaki, “Strength development of concrete incorporating high levels of ground granulated blast-furnace slag at low temperature,” Materials Journal, vol. 97, no. 1, pp. 66–70, 2000. View at Google Scholar · View at Scopus
  12. J. I. Escalante, L. Y. Gómez, K. K. Johal, G. Mendoza, H. Mancha, and J. Méndez, “Reactivity of blast-furnace slag in Portland cement blends hydrated under different conditions,” Cement and Concrete Research, vol. 31, no. 10, pp. 1403–1409, 2001. View at Publisher · View at Google Scholar · View at Scopus
  13. C.-M. Aldea, F. Young, K. Wang, and S. P. Shah, “Effects of curing conditions on properties of concrete using slag replacement,” Cement and Concrete Research, vol. 30, no. 3, pp. 465–472, 2000. View at Publisher · View at Google Scholar · View at Scopus
  14. H. Yazici, S. Aydin, H. Yiǧiter, and B. Baradan, “Effect of steam curing on class C high-volume fly ash concrete mixtures,” Cement and Concrete Research, vol. 35, no. 6, pp. 1122–1127, 2005. View at Publisher · View at Google Scholar · View at Scopus
  15. B. Liu, Y. Xie, and J. Li, “Influence of steam curing on the compressive strength of concrete containing supplementary cementing materials,” Cement and Concrete Research, vol. 35, no. 5, pp. 994–998, 2005. View at Publisher · View at Google Scholar · View at Scopus