Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017, Article ID 7679219, 10 pages
https://doi.org/10.1155/2017/7679219
Research Article

Investigations on the Hot Stamping of AW-7921-T4 Alloy Sheet

1LKR Leichtmetallkompetenzzentrum Ranshofen GmbH, Austrian Institute of Technology, Lamprechtshausnerstrasse 61, Postfach 26, 5282 Ranshofen, Austria
2Robinson Research Institute, Victoria University of Wellington, 69 Gracefield Road, P.O. Box 33-436, Petone, Lower Hutt 5046, New Zealand

Correspondence should be addressed to M. Kumar; moc.liamg@rtii.mkm

Received 23 August 2016; Revised 24 November 2016; Accepted 26 January 2017; Published 26 February 2017

Academic Editor: Gianfranco Palumbo

Copyright © 2017 M. Kumar and N. G. Ross. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

M. Kumar and N. G. Ross, “Investigations on the Hot Stamping of AW-7921-T4 Alloy Sheet,” Advances in Materials Science and Engineering, vol. 2017, Article ID 7679219, 10 pages, 2017. https://doi.org/10.1155/2017/7679219.