Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017, Article ID 7967848, 12 pages
https://doi.org/10.1155/2017/7967848
Research Article

Synthesis and Characterization of Zn-Nix Advanced Alloys Prepared by Mechanical Milling and Sintering at Solid-State Process

1Universidad Autónoma del Estado de México, Centro Universitario UAEM Valle de México, Laboratorio de Investigación y Desarrollo de Materiales Industriales, 54500 Atizapán de Zaragoza, MEX, Mexico
2Tecnológico de Estudios Superiores de Ixtapaluca, 56580 Ixtapaluca, MEX, Mexico
3Centro de Investigación en Materiales Avanzados (CIMAV), Laboratorio Nacional de Nanotecnología, 31136 Chihuahua, CHIH, Mexico

Correspondence should be addressed to Héctor Herrera-Hernández; xm.xemeau@harerrehh

Received 2 July 2017; Revised 3 October 2017; Accepted 12 October 2017; Published 28 December 2017

Academic Editor: Andres Sotelo

Copyright © 2017 José G. Miranda-Hernández et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

José G. Miranda-Hernández, Héctor Herrera-Hernández, Carlos O. González-Morán, Jesús Noé Rivera Olvera, Ivanovich Estrada-Guel, and Fabián Botello Villa, “Synthesis and Characterization of Zn-Nix Advanced Alloys Prepared by Mechanical Milling and Sintering at Solid-State Process,” Advances in Materials Science and Engineering, vol. 2017, Article ID 7967848, 12 pages, 2017. https://doi.org/10.1155/2017/7967848.