Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017 (2017), Article ID 7967848, 12 pages
https://doi.org/10.1155/2017/7967848
Research Article

Synthesis and Characterization of Zn-Nix Advanced Alloys Prepared by Mechanical Milling and Sintering at Solid-State Process

1Universidad Autónoma del Estado de México, Centro Universitario UAEM Valle de México, Laboratorio de Investigación y Desarrollo de Materiales Industriales, 54500 Atizapán de Zaragoza, MEX, Mexico
2Tecnológico de Estudios Superiores de Ixtapaluca, 56580 Ixtapaluca, MEX, Mexico
3Centro de Investigación en Materiales Avanzados (CIMAV), Laboratorio Nacional de Nanotecnología, 31136 Chihuahua, CHIH, Mexico

Correspondence should be addressed to Héctor Herrera-Hernández

Received 2 July 2017; Revised 3 October 2017; Accepted 12 October 2017; Published 28 December 2017

Academic Editor: Andres Sotelo

Copyright © 2017 José G. Miranda-Hernández et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. E. Said Gouda, “Classifications, characterization and applications of metallic alloys,” International Journal of Physics and Astronomy, vol. 2, no. 2, pp. 15–49, 2014. View at Google Scholar
  2. G. Barceló, E. Garciâ, M. Sarret, C. Müller, and J. Pregonas, “Characterization of zinc-nickel alloys obtained from an industrial chloride bath,” Journal of Applied Electrochemistry, vol. 28, no. 10, pp. 1113–1120, 1998. View at Publisher · View at Google Scholar
  3. M. E. P. Souza, E. Ariza, M. Ballester, I. V. P. Yoshida, L. A. Rocha, and C. M. A. Freire, “Silicone resin to improve corrosion resistance of Zn and ZnFe coated steel,” Revista Matéria, vol. 11, no. 1, pp. 16–23, 2006. View at Publisher · View at Google Scholar
  4. G. Chen, K. D. Liss, and P. Cao, “An in situ study of NiTi powder sintering using neutron diffraction,” Metals, vol. 5, no. 2, pp. 530–546, 2015. View at Publisher · View at Google Scholar · View at Scopus
  5. N. Setoudeh, M. H. Paydar, and M. Sajjadnejad, “Effect of high energy ball milling on the reduction of nickel oxide by zinc powder,” Journal of Alloys and Compounds, vol. 623, pp. 117–120, 2015. View at Publisher · View at Google Scholar · View at Scopus
  6. S. Bid and S. K. Pradhan, “Characterization of crystalline structure of ball-milled nano-Ni–Zn-ferrite by Rietveld method,” Materials Chemistry and Physics, vol. 84, no. 2-3, pp. 291–301, 2004. View at Publisher · View at Google Scholar · View at Scopus
  7. J. Park, W. Kim, C. Suh, and S. Kim, “Catalytic properties of Ni-Zn alloy prepared by mechanical alloying for steam reforming from methanol,” Metals and Materials International, vol. 18, no. 2, pp. 237–241, 2012. View at Publisher · View at Google Scholar · View at Scopus
  8. J. M. Kim, J. S. Park, and H. S. Yun, “Microstructure and mechanical properties of TiC nanoparticle-reinforced iron-matrix composites,” Strength of Materials, vol. 46, no. 2, pp. 177–182, 2014. View at Publisher · View at Google Scholar · View at Scopus
  9. K. S. Mohammed and H. T. Naeem, “Effect of milling parameters on the synthesis of Al-Ni intermetallic compound prepared by mechanical alloying,” Physics of Metals and Metallography, vol. 116, no. 9, pp. 859–868, 2015. View at Publisher · View at Google Scholar · View at Scopus
  10. M. A. Ahmed, E. Ateia, L. M. Salah, and A. A. El-Gamal, “Structural and electrical studies on La3+ substituted Ni–Zn ferrites,” Materials Chemistry and Physics, vol. 92, no. 2-3, pp. 310–321, 2005. View at Publisher · View at Google Scholar · View at Scopus
  11. G. Penev-Vassilev, T. Gomez-Acebo, and J. C. Tedenac, “Thermodynamic optimization of the Ni-Zn system,” Journal of Phase Equilibria, vol. 21, no. 3, pp. 287–301, 2000. View at Publisher · View at Google Scholar
  12. T. Lee, D. S. Shih, Y. Lee, and C. S. Lee, “Manufacturing ultrafine-grained Ti-6Al-4V bulk rod using multi-pass caliber-rolling,” Metals, vol. 5, no. 2, pp. 777–789, 2015. View at Publisher · View at Google Scholar · View at Scopus
  13. B. Thangjam and I. Soibam, “Comparative study of structural, electrical, and magnetic behaviour of Ni-Cu-Zn nanoferrites sintered by microwave and conventional techniques,” Journal of Nanomaterials, vol. 2017, Article ID 5756197, 10 pages, 2017. View at Publisher · View at Google Scholar
  14. C. Stergiou, “Microstructure and electromagnetic properties of Ni-Zn-Co ferrite up to 20 GHz,” Advances in Materials Science and Engineering, vol. 2016, Article ID 1934783, 7 pages, 2016. View at Publisher · View at Google Scholar · View at Scopus
  15. K. I. Chen, S. C. Cheng, C. H. Cheng, S. Wu, Y. L. Jiang, and T. C. Cheng, “The Effects of gallium additions on microstructures and thermal and mechanical properties of Sn-9Zn solder alloys,” Advances in Materials Science and Engineering, vol. 2014, Article ID 606814, 10 pages, 2014. View at Publisher · View at Google Scholar · View at Scopus
  16. R. Casati and M. Vedani, “Metal matrix composites reinforced by nano-particles—a review,” Metals, vol. 4, no. 1, pp. 65–83, 2014. View at Publisher · View at Google Scholar · View at Scopus
  17. I. S. El-Mahallawi, A. Y. Shash, and A. E. Amer, “Nanoreinforced Cast Al-Si Alloys with Al2O3, TiO2 and ZrO2 Nanoparticles,” Metals, vol. 5, no. 2, pp. 802–821, 2015. View at Publisher · View at Google Scholar · View at Scopus
  18. J. A. Aragón, J. R. Miranda, I. Hilerio et al., “Compuestos de matriz metálica rica en Zn, con alto contenido de Al y componentes estructurales de compuestos intermetálicos de Cu-Zn y Cu-Al particulados,” Revista Mexicana de Física, vol. 53, no. 2, pp. 105–113, 2007. View at Google Scholar
  19. V. Viswanathan, T. Laha, K. Balani, A. Agarwal, and S. Seal, “Challenges and advances in nanocomposite processing techniques,” Materials Science and Engineering: R: Reports, vol. 54, no. 5-6, pp. 121–285, 2006. View at Publisher · View at Google Scholar · View at Scopus
  20. R. A. Rodríguez-Díaz, A. Sedano, A. Molina-Ocampo, J. Porcayo-Calderón, J. Uruchurtu, and M. Gonzalez-Pérez, “Producción de una aleación nanoestructurada FeAl mediante aleación mecánica y su caracterización microestructural,” Avances en Ciencias e Ingeniería, vol. 4, no. 4, pp. 95–104, 2013. View at Google Scholar
  21. H. Kang, S. J. Lee, and I.-J. Shon, “Rapid synthesis and consolidation of nanostructured (Mo, W)Si2 by high-frequency induction heated sintering and its mechanical properties,” Journal of Ceramic Processing Research, vol. 15, no. 5, pp. 286–289, 2014. View at Google Scholar
  22. E. G. de Araujo, R. M. Leal-Neto, M. F. Pillis, and F. Ambrózio-Filho, “High energy ball milling processing,” Materials Science Forum, vol. 416–418, no. 4, pp. 128–133, 2003. View at Publisher · View at Google Scholar
  23. C. Carreño-Gallardo, I. Estrada-Guel, M. Romero-Romo, R. Cruz-García, C. López-Meléndez, and R. Martínez-Sánchez, “Characterization of Al2O3NP–Al2024 and AgCNP–Al2024 composites prepared by mechanical processing in a high-energy ball mill,” Journal of Alloys and Compounds, vol. 536, pp. S26–S30, 2012. View at Publisher · View at Google Scholar · View at Scopus
  24. Ö. Balci, K. Gokuldoss-Prashanth, S. Scudino et al., “Effect of milling time and the consolidation process on the properties of Al matrix composites reinforced with Fe-based glassy particles,” Metals, vol. 5, no. 2, pp. 669–685, 2015. View at Publisher · View at Google Scholar · View at Scopus
  25. W. A. Badawy, H. Nady, and G. M Abd EI-Hafez, “Electrodeposited Zn-Ni alloys as promising catalysts for hydrogen production-preparation, characterization and electro-catalytic activity,” Journal of Alloys and Compounds, vol. 699, pp. 1146–1156, 2017. View at Publisher · View at Google Scholar
  26. I. Herraiz-Cardona, E. Ortega, and V. Pérez-Herranz, “Impedance study of hydrogen evolution on Ni/Zn and Ni–Co/Zn stainless steel based electrodeposits,” Electrochimica Acta, vol. 56, no. 3, pp. 1308–1315, 2011. View at Publisher · View at Google Scholar · View at Scopus
  27. M. J. De Giz, S. A. S. Machado, L. A. Avaca, and E. R. Gonzalez, “High area Ni-Zn and Ni-Co-Zn codeposits as hydrogen electrodes in alkaline solutions,” Journal of Applied Electrochemistry, vol. 22, no. 10, pp. 973–977, 1992. View at Publisher · View at Google Scholar · View at Scopus
  28. J. Divised, H. Schmitz, and J. Balej, “Ni and Mo coatings as hydrogen cathodes,” Journal of Applied Electrochemistry, vol. 19, no. 4, pp. 519–530, 1989. View at Publisher · View at Google Scholar · View at Scopus
  29. T. Hussain, M. T. Zubaida Butt, M. N. Ahmed et al., “Fabrication of Ag and Ni nanocatalyst, with enhanced efficiency,” Journal of Chemistry, vol. 2015, Article ID 601484, 4 pages, 2015. View at Publisher · View at Google Scholar · View at Scopus
  30. F. Meng, P. Zhong, Z. Li, X. Cui, and H. Zheng, “Surface structure and catalytic performance of Ni-Fe catalyst for low-temperature CO hydrogenation,” Journal of Chemistry, vol. 2014, Article ID 534842, 7 pages, 2014. View at Publisher · View at Google Scholar · View at Scopus
  31. J. N. Rivera Olvera, G. J. Gutiérrez Paredes, A. Romero Serrano et al., “Synthesis and characterization of a MoWC-WC-NiC nanocomposite via mechanical alloying and sintering,” Powder Technology, vol. 271, pp. 292–300, 2015. View at Publisher · View at Google Scholar · View at Scopus
  32. J. N. Rivera-Olvera, J. Acevedo-Martínez, H. Herrera-Hernández, I. García-Orozco, and L. Díaz-Barriga-Arceo, “Microstructural characterization and thermodynamic analysis of MoZn produced by mechanical alloying,” Journal of Alloys and Compounds, vol. 696, pp. 329–337, 2007. View at Publisher · View at Google Scholar
  33. X. Su, N. Y. Tang, and J. M. Toguri, “Thermodynamic assessment of the Ni-Zn system,” Journal of Phase Equilibra, vol. 23, no. 2, pp. 140–148, 2002. View at Publisher · View at Google Scholar · View at Scopus
  34. P. Li, T. Chen, S. Zhang, and R. Guan, “Research on semisolid microstructural evolution of 2024 aluminum alloy prepared by powder thixoforming,” Metals, vol. 5, no. 2, pp. 547–564, 2015. View at Publisher · View at Google Scholar · View at Scopus
  35. J. A. Aragón and J. R. Miranda, “Materiales compuestos de matriz metálica rica en Zn con alto contenido de Al y componente estructural de ZnO,” Revista Mexicana de Física, vol. 51, no. 4, pp. 356–364, 2005. View at Google Scholar
  36. W. Xiong, H. Xu, and Y. Du, “Thermodynamic investigation of the galvanizing systems, II: thermodynamic evaluation of the Ni–Zn system,” Calphad, vol. 35, no. 3, pp. 276–283, 2011. View at Publisher · View at Google Scholar · View at Scopus
  37. B. D. Cullity, “Elements of X-Ray Diffraction,” Series in Metallurgy and Materials, Addison-Wesley, Boston, MA, USA, 2nd edition edition, 1977. View at Google Scholar
  38. P. Nash and Y. Y. Pan, Phase Diagrams of Binary Nickel Alloys, P. Nash, Ed., ASM International, Materials Park, OH, USA, 1991.