Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017, Article ID 8175034, 11 pages
https://doi.org/10.1155/2017/8175034
Research Article

Effects of Mechanical Alloying on Sintering Behavior of Tungsten Carbide-Cobalt Hard Metal System

Department of Chemical Engineering, Faculty of Chemical and Metallurgical Engineering, Yıldız Technical University, Istanbul, Turkey

Correspondence should be addressed to Ahmet Ozan Gezerman; moc.oohay@nazo_temha

Received 20 June 2017; Accepted 3 August 2017; Published 20 September 2017

Academic Editor: Peter Majewski

Copyright © 2017 Ahmet Ozan Gezerman and Burcu Didem Çorbacıoğlu. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Ahmet Ozan Gezerman and Burcu Didem Çorbacıoğlu, “Effects of Mechanical Alloying on Sintering Behavior of Tungsten Carbide-Cobalt Hard Metal System,” Advances in Materials Science and Engineering, vol. 2017, Article ID 8175034, 11 pages, 2017. https://doi.org/10.1155/2017/8175034.