Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017, Article ID 8208079, 11 pages
https://doi.org/10.1155/2017/8208079
Research Article

Compression Behavior of Confined Columns with High-Volume Fly Ash Concrete

1Department of Civil and Environmental Engineering, Gachon University, Seongnam-si, Gyeonggi-do 13120, Republic of Korea
2Department of Architectural Engineering, Gachon University, Seongnam-si, Gyeonggi-do 13120, Republic of Korea

Correspondence should be addressed to Wonchang Choi; moc.liamg@iohc.gnahcnow

Received 10 May 2017; Accepted 18 June 2017; Published 30 July 2017

Academic Editor: Prinya Chindaprasirt

Copyright © 2017 Sung-Won Yoo et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. R. Siddique, “Performance characteristics of high-volume Class F fly ash concrete,” Cement and Concrete Research, vol. 34, no. 3, pp. 487–493, 2004. View at Publisher · View at Google Scholar · View at Scopus
  2. K. Mala, A. K. Mullick, K. K. Jain, and P. K. Singh, “Effect of relative levels of mineral admixtures on strength of concrete with ternary cement blend,” International Journal of Concrete Structures and Materials, vol. 7, no. 3, pp. 239–249, 2013. View at Publisher · View at Google Scholar · View at Scopus
  3. V. M. Malhotra, “Durability of concrete incorporating high-volume of low-calcium (ASTM Class F) fly ash,” Cement and Concrete Composites, vol. 12, no. 4, pp. 271–277, 1990. View at Publisher · View at Google Scholar · View at Scopus
  4. T. R. Naik, B. W. Ramme, and J. H. Tews, “Use of high volumes of Class C and Class F fly ash in concrete,” Cement, Concrete and Aggregates, vol. 16, no. 1, pp. 12–20, 1994. View at Publisher · View at Google Scholar · View at Scopus
  5. D. Cross, J. Stephens, and J. Vollmer, “Structural applications of 100 percent fly ash concrete,” in Proceedings of the World of Coal Ash (WOCA), pp. 1–9, Springer, Lexington, Kentucky, USA, 2005.
  6. J.-E. Kim, W.-S. Park, Y.-I. Jang et al., “Mechanical Properties of Energy Efficient Concretes Made with Binary, Ternary, and Quaternary Cementitious Blends of Fly Ash, Blast Furnace Slag, and Silica Fume,” International Journal of Concrete Structures and Materials, vol. 10, no. 3, pp. 97–108, 2016. View at Publisher · View at Google Scholar · View at Scopus
  7. T. R. Naik and S. S. Singh, “Influence of fly ash on setting and hardening characteristics of concrete systems,” ACI Materials Journal, vol. 94, no. 5, pp. 355–360, 1997. View at Google Scholar · View at Scopus
  8. C. H. Huang, S. K. Lin, C. S. Chang, and H. J. Chen, “Mix proportions and mechanical properties of concrete containing very high-volume of Class F fly ash,” Construction and Building Materials, vol. 46, pp. 71–78, 2013. View at Publisher · View at Google Scholar · View at Scopus
  9. G. Venkatesan, S. Reghu Raman, and M. Chandra Sekaran, “Flexural behavior of reinforced concrete beams using high volume fly ash concrete confinement in compression zone,” Journal of Civil Engineering (IEB), vol. 41, no. 2, pp. 87–97, 2013. View at Google Scholar
  10. M. Arezoumandi, C. A. Ortega, and J. S. Volz, “Flexural behavior of high-volume fly ash concrete beams-experimental study,” Transportation Research Record, vol. 2508, pp. 22–30, 2015. View at Publisher · View at Google Scholar · View at Scopus
  11. M. Arezoumandi, J. S. Volz, and J. J. Myers, “Shear behavior of high-volume fly ash concrete versus conventional concrete,” Journal of Materials in Civil Engineering, vol. 25, no. 10, pp. 1506–1513, 2013. View at Publisher · View at Google Scholar · View at Scopus
  12. R. Thangaraj and R. Thenmozhi, “Experimental study on rc beams using high volume fly ash,” IRA-International Journal of Technology & Engineering, vol. 3, no. 2, pp. 71–85, 2016. View at Google Scholar
  13. V. V. Cao and H. R. Ronagh, “A model for damage analysis of concrete,” Advances in Concrete Construction, vol. 1, no. 2, pp. 187–200, 2013. View at Publisher · View at Google Scholar
  14. M. K. M. Reddar, Stress-strain model of Unconfined and Confined Concrete and Stress-Block Parameters, Master Thesis [Master, thesis], University of Texas A & M, College Station, Tex, USA, 2009.
  15. T. Tavio and A. Tata, “Predicting Nonlinear behavior ad stress-strain relationship of rectangular confined reinforced concrete columns with ANSYS,” Civil Engineering Dimension, vol. 11, no. 1, pp. 23–31, 2009. View at Google Scholar
  16. S. W. Yoo, S. H. Jung, and S.-J. Kwon, “Evaluation of compressive and shear strength characteristics in high volume fly ash concrete,” Applied Mechanics and Materials, vol. 584-586, pp. 1282–1288, 2014. View at Publisher · View at Google Scholar · View at Scopus
  17. M. H. Harajli, E. Hantouche, and K. Soudki, “Stress-strain model for fiber-reinforced polymer jacketed concrete columns,” ACI Structural Journal, vol. 103, no. 5, pp. 672–682, 2006. View at Google Scholar · View at Scopus
  18. D. C. Kent and R. Park, “Flexural members with confined concrete,” Journal of the Structural Division, vol. 97, no. 7, pp. 1969–1990, 1971. View at Google Scholar
  19. J. Hoshikuma, K. Kawashima, K. Nagaya, and A. W. Taylor, “Stress-strain model for confined reinforced concrete in bridge piers,” Journal of Structural Engineering, vol. 123, no. 5, pp. 624–633, 1997. View at Publisher · View at Google Scholar · View at Scopus
  20. P. Muthupriya, K. Subramanian, and B. G. V. Vishnuram, “Investigation of Behaviour of high performance reinforced concrete columns with metakaolin and fly ash as admixture,” International Journal of Advanced Engineering Technology, vol. 2, no. 1, pp. 190–202.