Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017, Article ID 8251842, 12 pages
https://doi.org/10.1155/2017/8251842
Research Article

Correlation between the Compressive, Tensile Strength of Old Concrete under Marine Environment and Prediction of Long-Term Strength

1Civil Engineering Department, Logistical Engineering University, Chongqing 401311, China
2Training Department, Logistical Engineering University, Chongqing 401311, China

Correspondence should be addressed to Shiyong Jiang; moc.361@yihsgnaij

Received 22 March 2017; Accepted 3 May 2017; Published 25 May 2017

Academic Editor: Andrey E. Miroshnichenko

Copyright © 2017 Weilai Yao et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. C. Gaedicke, A. Torres, K. C. T. Huynh, and A. Marines, “A method to correlate splitting tensile strength and compressive strength of pervious concrete cylinders and cores,” Construction and Building Materials, vol. 125, pp. 271–278, 2016. View at Publisher · View at Google Scholar · View at Scopus
  2. K. Yan, H. Xu, G. Shen, and P. Liu, “Prediction of splitting tensile strength from cylinder compressive strength of concrete by support vector machine,” Advances in Materials Science and Engineering, vol. 2013, Article ID 597257, 2013. View at Publisher · View at Google Scholar · View at Scopus
  3. M. H. Severcan, “Prediction of splitting tensile strength from the compressive strength of concrete using GEP,” Neural Computing and Applications, vol. 21, no. 8, pp. 1937–1945, 2012. View at Publisher · View at Google Scholar · View at Scopus
  4. M. Saridemir, “Empirical modeling of splitting tensile strength from cylinder compressive strength of concrete by genetic programming,” Expert Systems with Applications, vol. 38, no. 11, pp. 14257–14268, 2011. View at Publisher · View at Google Scholar · View at Scopus
  5. F. A. Oluokun, “Prediction of concrete tensile strength from its compressive strength. Evaluation of existing relations for normal weight concrete,” ACI Materials Journal, vol. 88, no. 3, pp. 302–309, 1991. View at Google Scholar · View at Scopus
  6. M. Weber and C. Thiele, “Correlation between the compressive and tensile strength of old concretes: applicability of the relationship described by DIN EN 1992-1-1,” Beton- Und Stahlbetonbau, vol. 111, no. 10, pp. 635–644, 2016. View at Google Scholar
  7. B. Li, L. Cai, K. Wang, and Y. Zhang, “Prediction of the residual strength for durability failure of concrete structure in acidic environments,” Journal Wuhan University of Technology, Materials Science Edition, vol. 31, no. 2, pp. 340–344, 2016. View at Publisher · View at Google Scholar · View at Scopus
  8. Y. Zhou, H. Tian, L. Sui, F. Xing, and N. Han, “Strength deterioration of concrete in sulfate environment: an experimental study and theoretical modeling,” Advances in Materials Science and Engineering, vol. 2015, Article ID 951209, 13 pages, 2015. View at Publisher · View at Google Scholar · View at Scopus
  9. J. Cai, F. Zhang, W. Cui, S. Chen, and P. Liu, “Concrete strength and deformation property under sea water erosion environment,” Advanced Materials Research, vol. 446-449, pp. 2554–2559, 2012. View at Publisher · View at Google Scholar · View at Scopus
  10. M. Ramli, W. H. Kwan, and N. F. Abas, “Strength and durability of coconut-fiber-reinforced concrete in aggressive environments,” Construction and Building Materials, vol. 38, pp. 554–566, 2013. View at Publisher · View at Google Scholar · View at Scopus
  11. H.-S. Shang, T.-H. Yi, and X.-X. Guo, “Study on strength and ultrasonic velocity of air-entrained concrete and plain concrete in cold environment,” Advances in Materials Science and Engineering, vol. 2014, Article ID 706986, 7 pages, 2014. View at Publisher · View at Google Scholar · View at Scopus
  12. B. S. Thomas, R. C. Gupta, P. Mehra, and S. Kumar, “Performance of high strength rubberized concrete in aggressive environment,” Construction and Building Materials, vol. 83, article no. 6441, pp. 320–326, 2015. View at Publisher · View at Google Scholar · View at Scopus
  13. J. O. Okeniyi, I. O. Oladele, O. M. Omoniyi, C. A. Loto, and A. P. Popoola, “Inhibition and compressive-strength performance of Na2Cr2O7 and C10H14N2Na2O8·2H2O in steel-reinforced concrete in corrosive environments,” Canadian Journal of Civil Engineering, vol. 42, no. 6, pp. 408–416, 2015. View at Publisher · View at Google Scholar
  14. W. H. Kwan, M. Ramli, and C. B. Cheah, “Flexural strength and impact resistance study of fibre reinforced concrete in simulated aggressive environment,” Construction and Building Materials, vol. 63, pp. 62–71, 2014. View at Publisher · View at Google Scholar · View at Scopus
  15. M. Ramli, W. H. Kwan, and N. F. Abas, “Application of non-corrosive barchip fibres for high strength concrete enhancements in aggressive environments,” Composites Part B: Engineering, vol. 53, pp. 134–144, 2013. View at Publisher · View at Google Scholar · View at Scopus
  16. X. Yuan, B. Li, G. Cui, S. Zhao, and M. Zhou, “Effect of fly ash and early strength agent on durability of concrete exposed to the cyclic sulfate environment,” Journal Wuhan University of Technology, Materials Science Edition, vol. 25, no. 6, pp. 1065–1069, 2010. View at Publisher · View at Google Scholar · View at Scopus
  17. E. Güneyisi, M. Gesoğlu, and K. Mermerdaş, “Strength deterioration of plain and metakaolin concretes in aggressive sulfate environments,” Journal of Materials in Civil Engineering, vol. 22, no. 4, pp. 403–407, 2010. View at Publisher · View at Google Scholar · View at Scopus
  18. J. P. Gorninski, D. C. Dal Molin, and C. S. Kazmierczak, “Strength degradation of polymer concrete in acidic environments,” Cement and Concrete Composites, vol. 29, no. 8, pp. 637–645, 2007. View at Publisher · View at Google Scholar · View at Scopus
  19. M. Ismail, B. Muhammad, and M. E. Ismail, “Compressive strength loss and reinforcement degradations of reinforced concrete structure due to long-term exposure,” Construction and Building Materials, vol. 24, no. 6, pp. 898–902, 2010. View at Publisher · View at Google Scholar · View at Scopus
  20. P. K. Mehta, “Durability of concrete exposed to marine environment - A fresh look,” ACI Structure Journal, vol. 109, pp. 1–30, 1988. View at Google Scholar
  21. M. Shekarchi, A. Rafiee, and H. Layssi, “Long-term chloride diffusion in silica fume concrete in harsh marine climates,” Cement and Concrete Composites, vol. 31, no. 10, pp. 769–775, 2009. View at Publisher · View at Google Scholar · View at Scopus
  22. G. W. Washa and K. F. Wendt, “Fifty year properties of concrete,” American Concrete Institute, vol. 72, no. 1, pp. 20–28, 1975. View at Publisher · View at Google Scholar
  23. China Engineering Construction Standardization Association, CECS 03: 2007 Technical Specification for Testing Concrete Strength with Drilled Core, China Building Industry Press, Beijing, China, 2007.
  24. European Committee for Standardization, Concrete-Part 1: Specification, Performance, Production and Conformity, European Committee, 2006.
  25. Ministry of Housing and Urban-Rural Development of the People's Republic of China, GB 50010-2010 Code for Design of Concrete Structures, China Building Industry Press, Beijing, China, 2010.
  26. P. C. Aitcin, S. L. Sarkar, and P. Laplante, “Long-term characteristics of a very high strength concrete,” Concrete International, vol. 12, no. 1, pp. 40–44, 1990. View at Google Scholar · View at Scopus
  27. Z. P. Bazant, M. T. Kazemi, T. Hasegawa, and J. Mazars, “Size effect in Brazilian split-cylinder tests. Measurements and fracture analysis,” ACI Materials Journal, vol. 88, no. 3, pp. 325–332, 1991. View at Google Scholar · View at Scopus
  28. K. Duan, X. Hu, and F. H. Wittmann, “Scaling of quasi-brittle fracture: Boundary and size effect,” Mechanics of Materials, vol. 38, no. 1-2, pp. 128–141, 2006. View at Publisher · View at Google Scholar · View at Scopus
  29. C. Rocco, G. V. Guinea, J. Planas, and M. Elices, “Size effect and boundary conditions in the Brazilian test: experimental verification,” Materials and Structures, vol. 32, no. 217, pp. 210–217, 1999. View at Google Scholar · View at Scopus
  30. C. Rocco, G. V. Guinea, J. Planas, and M. Elices, “Size effect and boundary conditions in the brazilian test: theoretical analysis,” Materials Structures, vol. 32, pp. 437–444, 1999. View at Publisher · View at Google Scholar
  31. V. Kadleček, S. Modrý, and V. Kadleček, “Size effect of test specimens on tensile splitting strength of concrete: general relation,” Materials and Structures, vol. 35, no. 1, pp. 28–34, 2002. View at Publisher · View at Google Scholar
  32. Z. Guo, Theory of Reinforced Concrete, Tsinghua University Press, Beijing, China, 2013.
  33. International Federation for Structural Concrete (FIB), FIB056-Model Code 2010, Concrete Structures, DCC Document Competence Center Siegmar Kästl e.K., Germany, Lausanne, Switzerland, 2010.
  34. ACI committee 318-14, Building Code Requirements for Structural Concrete, American Concrete Institute, Farmington Hills, Mich, USA, 2014.
  35. Y. Wang, X. Hu, L. Liang, and W. Zhu, “Determination of tensile strength and fracture toughness of concrete using notched 3-p-b specimens,” Engineering Fracture Mechanics, vol. 160, pp. 67–77, 2016. View at Publisher · View at Google Scholar · View at Scopus
  36. J. Guan, X. Hu, and Q. Li, “In-depth analysis of notched 3-p-b concrete fracture,” Engineering Fracture Mechanics, vol. 165, pp. 57–71, 2016. View at Publisher · View at Google Scholar
  37. D. Niu, “Changing models of concrete strength along with time in marine environment,” Journal of Xi'an University of Architecture and Technology, vol. 27, no. 03, pp. 49–52, 1995. View at Google Scholar
  38. Q. Zhao, Y. Yong, and G. Sen, “Reliability estimation of in-service tunnel shield capacity,” in Proceedings of the International Conference on Pipelines and Trenchless Technology 2009, ICPTT 2009: Advances and Experiences with Pipelines and Trenchless Technology for Water, Sewer, Gas, and Oil Applications, pp. 1783–1792, Shanghai, China, 2009. View at Publisher · View at Google Scholar · View at Scopus