Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017, Article ID 8280317, 11 pages
https://doi.org/10.1155/2017/8280317
Research Article

Shear Strength Reduction Factor of Prestressed Hollow-Core Slab Units Based on the Reliability Approach

1Department of Architectural Engineering, University of Seoul, 163 Seoulsiripdae-ro, Dongdaemun-gu, Seoul 02504, Republic of Korea
2Department of Medical Space Design & Management, Konyang University, 158 Gwanjeodong-ro, Seo-gu, Daejeon 35365, Republic of Korea

Correspondence should be addressed to Kang Su Kim; rk.ca.sou@mikgnak

Received 10 February 2017; Revised 9 May 2017; Accepted 13 June 2017; Published 17 July 2017

Academic Editor: Paulo M. S. T. De Castro

Copyright © 2017 Hae-Chang Cho et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. R. J. Becker and D. R. Buettner, “Shear Tests of Extruded Hollow-Core Slabs,” PCI Journal, vol. 30, no. 2, pp. 40–54, 1985. View at Publisher · View at Google Scholar
  2. D. R. Buettner and R. J. Becker, PCI Manual for the Design of Hollow-Core Slabs, Precast/Prestressed Concrete Institute, ILLINOIS, Chicago, 2nd edition, 1998.
  3. N. M. Hawkins and S. K. Ghosh, “Shear strength of hollow-core slabs,” PCI Journal, vol. 51, no. 1, pp. 110–115, 2006. View at Publisher · View at Google Scholar · View at Scopus
  4. ACI Committee 318, Building Code Requirements for Structural Concrete (ACI 318-05) and Commentary, American Concrete Committee, Farmington Hills, MI, USA, 2005.
  5. ACI Committee 318, Ed., Building Code Requirements for Structural Concrete (ACI 318-08) and Commentary, American Concrete Committee, Farmington Hills, MI, USA, 2008.
  6. K. D. Palmer and A. E. Schultz, “Factors affecting web-shear capacity of deep hollow-core units,” PCI Journal, vol. 55, no. 2, pp. 123–146, 2010. View at Publisher · View at Google Scholar · View at Scopus
  7. J. H. Im, Web shear strength of prestressed hollow-core slab [Ph.D. thesis], University of Seoul, 2015.
  8. K. D. Palmer and A. E. Schultz, “Experimental investigation of the web-shear strength of deep hollow-core units,” PCI Journal, vol. 56, no. 4, pp. 83–104, 2011. View at Publisher · View at Google Scholar · View at Scopus
  9. D. H. Lee, M.-K. Park, J.-Y. Oh, K. S. Kim, J.-H. Im, and S.-Y. Seo, “Web-shear capacity of prestressed hollow-core slab unit with consideration on the minimum shear reinforcement requirement,” Computers and Concrete, vol. 14, no. 3, pp. 211–231, 2014. View at Publisher · View at Google Scholar · View at Scopus
  10. AASHTO LRFD Bridge Design Specifications, American Association of State Highway and Transportation Officials, Washington, DC, USA, 4th edition, 2007.
  11. European Committee for Standardization (CEN), Eurocode 2: Design of Concrete Structure. Part 1-1: General Rules and Rules for Buildings, EN 1992-1-1:2004, Brussels, 2004.
  12. FIP Recommendations, Precast Prestressed Hollow Core Floors: FIP Commission on Prefabrication, London, UK, 1988. View at Publisher · View at Google Scholar
  13. Concrete Committee of JSCE, Ed., Standard Specifications for Concrete Structures Design, Japan Society of Civil Engineers, Tokyo, Japan, 2007.
  14. J. C. Walraven and W. P. M. Mercx, “The Bearing Capacity of Prestressed Hollow-Core Slabs,” Heron, vol. 28, no. 3, pp. 1–4, 1983. View at Google Scholar
  15. J. G. Macgregor, S. A. Mirza, and B. Ellingwood, “Statistical analysis of resistance of reinforced and prestressed concrete members,” ACI Journal, vol. 80, no. 16, pp. 167–176, 1983. View at Google Scholar
  16. ACI Committee 318, “Building code requirements for reinforced concrete (ACI 318-56) and commentary,” American Concrete Committee, 2014. View at Google Scholar
  17. TNO Building and Constructions Research, TNO Report: Standard Shear Tests on Prestressed Hollow Core Slabs according to EN 1168, TNO Building and Constructions Research, Hague, 2005.
  18. A. S. Nowak and M. M. Szerszen, “Calibration of design code for buildings (ACI 318): part 1 – statistical models for resistance,” ACI Structural Journal, vol. 100, no. 41, pp. 377–382, 2003. View at Google Scholar
  19. M. M. Szerszen and A. S. Nowak, “Calibration of design code for buildings (ACI 318): part 2 – reliability analysis and resistance factors,” ACI Structural Journal, vol. 100, no. 42, pp. 383–391, 2003. View at Google Scholar
  20. M. P. Collins and D. Mitchell, Prestressed Concrete Structures, Prentice Hall, 1991.
  21. D. A. Kuchma, N. M. Hawkins, S.-H. Kim, S. Sun, and K. S. Kim, “Simplified shear provisions of the AASHTO LRFD bridge design specifications,” PCI Journal, vol. 53, no. 3, pp. 53–73, 2008. View at Publisher · View at Google Scholar · View at Scopus
  22. D. H. Lee, S.-J. Han, and K. S. Kim, “Dual potential capacity model for reinforced concrete beams subjected to shear,” Structural Concrete, vol. 16, no. 3, pp. 443–456, 2016. View at Publisher · View at Google Scholar · View at Scopus
  23. G. Bertagnoli and G. Mancini, “Failure analysis of hollow-core slabs tested in shear,” Structural Concrete, vol. 10, no. 3, pp. 139–152, 2009. View at Publisher · View at Google Scholar · View at Scopus
  24. M. Pajari, “Resistance of prestressed hollow core slabs against web shear failure,” Research Notes 2292, Technical Research Centre of Finland (VTT), Espoo, Finland, 2005. View at Google Scholar
  25. M. Pajari, “Web shear failure in prestressed hollow core slabs,” Journal of Structural Engineering, vol. 42, no. 4, pp. 207–217, 2009. View at Google Scholar
  26. A. C. Ugural and S. K. Fenster, Advanced strength and applied Elasticity, Prentice Hall, 2003.
  27. J. G. Macgregor, “Load and Resistance Factors for Concrete Design,” ACI Journal, vol. 80, no. 27, pp. 279–287, 1983. View at Google Scholar
  28. M. Mayer, “Die Sicherheit der Bauwerke und ihre Berechnung nach Grenzkräften anstatt nach zulassigen Spannungen,” J. Springer, vol. 66, 1962. View at Google Scholar
  29. A. M. Freudenthal, “The Safety of Structure,” ASCE Transactions, vol. 112, pp. 383–391, 1947. View at Google Scholar
  30. A. H. Ang and W. H. Tang, Probability Concepts in Engineering Planning and Design, Wiley, 1990.
  31. P. Chetchotisak, J. Teerawong, S. Yindeesuk, and J. Song, “New strut-and-tie-models for shear strength prediction and design of RC deep beams,” Computers and Concrete, vol. 14, no. 1, pp. 19–40, 2014. View at Publisher · View at Google Scholar · View at Scopus