Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017 (2017), Article ID 8329048, 10 pages
https://doi.org/10.1155/2017/8329048
Research Article

Study on the Influence of Processing Parameters on Piercing Extrusion Process of Large Diameter Cupronickel Alloy Pipes Using 3D FEM Analysis

School of Metallurgical Engineering, Xi’an University of Architecture and Technology, Xi’an 710055, China

Correspondence should be addressed to Jun Cai

Received 22 August 2016; Revised 10 December 2016; Accepted 5 January 2017; Published 2 March 2017

Academic Editor: Katsuyuki Kida

Copyright © 2017 Jun Cai et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Jun Cai, Kuaishe Wang, Bing Zhang, and Wen Wang, “Study on the Influence of Processing Parameters on Piercing Extrusion Process of Large Diameter Cupronickel Alloy Pipes Using 3D FEM Analysis,” Advances in Materials Science and Engineering, vol. 2017, Article ID 8329048, 10 pages, 2017. doi:10.1155/2017/8329048