Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017 (2017), Article ID 8329048, 10 pages
https://doi.org/10.1155/2017/8329048
Research Article

Study on the Influence of Processing Parameters on Piercing Extrusion Process of Large Diameter Cupronickel Alloy Pipes Using 3D FEM Analysis

School of Metallurgical Engineering, Xi’an University of Architecture and Technology, Xi’an 710055, China

Correspondence should be addressed to Jun Cai; moc.361@6110nujiac

Received 22 August 2016; Revised 10 December 2016; Accepted 5 January 2017; Published 2 March 2017

Academic Editor: Katsuyuki Kida

Copyright © 2017 Jun Cai et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. G. Y. Lin, W. Yang, Y. C. Wan, P. J. Tang, B. Wei, and S. H. Zhang, “Influence of rare earth elements on corrosion resistance of BFe10-1-1 alloys in flowing marine water,” Journal of Rare Earths, vol. 27, no. 2, pp. 259–263, 2009. View at Publisher · View at Google Scholar · View at Scopus
  2. X. Zhu and T. Lei, “Characteristics and formation of corrosion product films of 70Cu-30Ni alloy in seawater,” Corrosion Science, vol. 44, no. 1, pp. 67–79, 2002. View at Publisher · View at Google Scholar · View at Scopus
  3. S. Cincera, S. Barella, M. Bellogini, and E. Bresciani, “De-nickelification of 70/30 cupronickel tubing in a cooling heat exchanger,” Journal of Failure Analysis and Prevention, vol. 12, no. 3, pp. 300–304, 2012. View at Publisher · View at Google Scholar · View at Scopus
  4. G. Chunlei, L. Xuefeng, H. Haiyou, and X. Jianxin, “Effects of room-temperature deformation on mechanical properties, microstructure and texture of continuous columnar-grained BFe10-1-1 cupronickel alloy tubes,” Materials Science and Engineering A, vol. 579, pp. 202–208, 2013. View at Publisher · View at Google Scholar · View at Scopus
  5. J. Cai, K. Wang, C. Miao, W. Li, W. Wang, and J. Yang, “Constitutive analysis to predict high-temperature flow behavior of BFe10-1-2 cupronickel alloy in consideration of strain,” Materials and Design, vol. 65, pp. 272–279, 2015. View at Publisher · View at Google Scholar · View at Scopus
  6. J. Cai, Y. Lei, K. S. Wang, X. L. Zhang, C. P. Miao, and W. B. Li, “A comparative investigation on the capability of modified zerilli-armstrong and arrhenius-type constitutive models to describe flow behavior of BFe10-1-2 cupronickel alloy at elevated temperature,” Journal of Materials Engineering and Performance, vol. 25, no. 5, pp. 1952–1963, 2016. View at Publisher · View at Google Scholar · View at Scopus
  7. L.-G. Guo, K.-K. Dong, B.-J. Zhang, H. Yang, W.-D. Zheng, and X.-W. Liu, “Dynamic recrystallization rules in needle piercing extrusion for AISI304 stainless steel pipe,” Transactions of Nonferrous Metals Society of China, vol. 22, no. 2, pp. s519–s527, 2012. View at Publisher · View at Google Scholar · View at Scopus