Table of Contents Author Guidelines Submit a Manuscript
Corrigendum

A corrigendum for this article has been published. To view the corrigendum, please click here.

Advances in Materials Science and Engineering
Volume 2017, Article ID 8408793, 23 pages
https://doi.org/10.1155/2017/8408793
Research Article

Study on the Gap Flow Simulation in EDM Small Hole Machining with Ti Alloy

School of Mechanical Engineering, Dalian Jiaotong University, Dalian 116028, China

Correspondence should be addressed to Wenchao Zhang; moc.liamg@525muart

Received 10 July 2016; Accepted 30 January 2017; Published 28 June 2017

Academic Editor: Gianfranco Palumbo

Copyright © 2017 Shengfang Zhang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Shengfang Zhang, Wenchao Zhang, Yu Liu, Fujian Ma, Chong Su, and Zhihua Sha, “Study on the Gap Flow Simulation in EDM Small Hole Machining with Ti Alloy,” Advances in Materials Science and Engineering, vol. 2017, Article ID 8408793, 23 pages, 2017. https://doi.org/10.1155/2017/8408793.