Research Article
Study on the Gap Flow Simulation in EDM Small Hole Machining with Ti Alloy
Table 1
Continuous discharge simulating parameters.
| Parameter | Description |
| Dielectric fluid | Deionized water | Tool | Copper | Workpiece | TC4 | Tool velocity | 0.01 m/s | Polarity | Positive | Diameter (mm) | 1, 2 | Flushing vel. (m/s) | 0, 2, 5 | Depth (mm) | 0.5, 2.0, 3.5, 5.0 |
|
|