Research Article
Study on the Gap Flow Simulation in EDM Small Hole Machining with Ti Alloy
Table 2
Continuous discharge simulating parameters.
| Parameter | Description |
| Maintaining voltage (U) | 15 V | Peak current () | 0.8 A | Dielectric fluid | Deionized water | Tool material | Red copper | Workpiece material | TC4 | Tool velocity | 0.01 m/s | Tool diameter | 2 mm | Depth (mm) | 0.5, 2.0, 3.5, 5.0 | Flushing velocity (m/s) | 0, 2 |
|
|