Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017, Article ID 8425718, 13 pages
https://doi.org/10.1155/2017/8425718
Research Article

Late-Age Properties of Concrete with Different Binders Cured under 45°C at Early Ages

Sichuan College of Architectural Technology, Deyang 618000, China

Correspondence should be addressed to Hu Jin; moc.361@uhtnijuh

Received 15 December 2016; Revised 7 February 2017; Accepted 15 February 2017; Published 6 March 2017

Academic Editor: Xiao-Yong Wang

Copyright © 2017 Hu Jin. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. Mengxiao, W. Qiang, and Z. Zhikai, “Comparison of the properties between high-volume fly ash concrete and high-volume steel slag concrete under temperature matching curing condition,” Construction and Building Materials, vol. 98, pp. 649–655, 2015. View at Publisher · View at Google Scholar · View at Scopus
  2. J. C. Wang and P. Y. Yan, “Influence of initial casting temperature and dosage of fly ash on hydration heat evolution of concrete under adiabatic condition,” Journal of Thermal Analysis and Calorimetry, vol. 85, no. 3, pp. 755–760, 2006. View at Publisher · View at Google Scholar · View at Scopus
  3. Q. Wang, M. Li, and G. Jiang, “The difference among the effects of high-temperature curing on the early hydration properties of different cementitious systems,” Journal of Thermal Analysis and Calorimetry, vol. 118, no. 1, pp. 51–58, 2014. View at Publisher · View at Google Scholar · View at Scopus
  4. J. I. Escalante-García and J. H. Sharp, “The microstructure and mechanical properties of blended cements hydrated at various temperatures,” Cement and Concrete Research, vol. 31, no. 5, pp. 695–702, 2001. View at Publisher · View at Google Scholar · View at Scopus
  5. P. Klieger, “Effect of mixing and curing temperature on concrete strength,” ACI Journal Proceedings, vol. 54, no. 6, pp. 1063–1081, 1958. View at Publisher · View at Google Scholar
  6. W. H. Price, “Factors influencing concrete strength,” ACI Journal Proceedings, vol. 47, no. 2, pp. 417–432, 1951. View at Publisher · View at Google Scholar
  7. J.-K. Kim, S. H. Han, and Y. C. Song, “Effect of temperature and aging on the mechanical properties of concrete: Part I. Experimental results,” Cement and Concrete Research, vol. 32, no. 7, pp. 1087–1094, 2002. View at Publisher · View at Google Scholar · View at Scopus
  8. W. Qiang, Y. Peiyu, and F. Jingjing, “Design of high-volume fly ash concrete for a massive foundation slab,” Magazine of Concrete Research, vol. 65, no. 2, pp. 71–81, 2013. View at Publisher · View at Google Scholar · View at Scopus
  9. S. Caré, “Effect of temperature on porosity and on chloride diffusion in cement pastes,” Construction and Building Materials, vol. 22, no. 7, pp. 1560–1573, 2008. View at Publisher · View at Google Scholar · View at Scopus
  10. D. Shen, J. Jiang, J. Shen, P. Yao, and G. Jiang, “Influence of curing temperature on autogenous shrinkage and cracking resistance of high-performance concrete at an early age,” Construction and Building Materials, vol. 103, pp. 67–76, 2016. View at Publisher · View at Google Scholar · View at Scopus
  11. D. M. Roy and G. M. Idorn, “Hydration, structure, and properties of blast furnace slag cements, mortars, and concrete,” Journal of the American Concrete Institute, vol. 79, no. 6, pp. 444–457, 1982. View at Google Scholar · View at Scopus
  12. J. J. Brooks and A. F. Al-Kaisi, “Early strength development of portland and slag cement concretes cured at elevated temperatures,” ACI Materials Journal, vol. 87, no. 5, pp. 503–507, 1990. View at Google Scholar · View at Scopus
  13. K. O. Kjellsen, R. J. Detwiler, and O. E. Gjørv, “Pore structure of plain cement pastes hydrated at different temperatures,” Cement and Concrete Research, vol. 20, no. 6, pp. 927–933, 1990. View at Publisher · View at Google Scholar · View at Scopus
  14. M.-H. Vu, J. Sulem, S. Ghabezloo, J.-B. Laudet, A. Garnier, and S. Guédon, “Time-dependent behaviour of hardened cement paste under isotropic loading,” Cement and Concrete Research, vol. 42, no. 6, pp. 789–797, 2012. View at Publisher · View at Google Scholar · View at Scopus
  15. M. Cervera, R. Faria, J. Oliver, and T. Prato, “Numerical modelling of concrete curing, regarding hydration and temperature phenomena,” Computers and Structures, vol. 80, no. 18-19, pp. 1511–1521, 2002. View at Publisher · View at Google Scholar · View at Scopus
  16. R. Faria, M. Azenha, and J. A. Figueiras, “Modelling of concrete at early ages: application to an externally restrained slab,” Cement and Concrete Composites, vol. 28, no. 6, pp. 572–585, 2006. View at Publisher · View at Google Scholar · View at Scopus
  17. B. Kuriakose, B. N. Rao, and G. Dodagoudar, “Early-age temperature distribution in a massive concrete foundation,” Procedia Technology, vol. 25, pp. 107–114, 2016. View at Publisher · View at Google Scholar
  18. I. Chu, Y. Lee, M. N. Amin, B.-S. Jang, and J.-K. Kim, “Application of a thermal stress device for the prediction of stresses due to hydration heat in mass concrete structure,” Construction and Building Materials, vol. 45, pp. 192–198, 2013. View at Publisher · View at Google Scholar · View at Scopus
  19. Y. Wu and R. Luna, “Numerical implementation of temperature and creep in mass concrete,” Finite Elements in Analysis and Design, vol. 37, no. 2, pp. 97–106, 2001. View at Publisher · View at Google Scholar · View at Scopus
  20. S.-H. Han and J.-K. Kim, “Effect of temperature and age on the relationship between dynamic and static elastic modulus of concrete,” Cement and Concrete Research, vol. 34, no. 7, pp. 1219–1227, 2004. View at Publisher · View at Google Scholar · View at Scopus
  21. B. Lothenbach, F. Winnefeld, C. Alder, E. Wieland, and P. Lunk, “Effect of temperature on the pore solution, microstructure and hydration products of Portland cement pastes,” Cement and Concrete Research, vol. 37, no. 4, pp. 483–491, 2007. View at Publisher · View at Google Scholar · View at Scopus
  22. I. Elkhadiri and F. Puertas, “The effect of curing temperature on sulphate-resistant cement hydration and strength,” Construction and Building Materials, vol. 22, no. 7, pp. 1331–1341, 2008. View at Publisher · View at Google Scholar · View at Scopus
  23. M. A. Abd-Elaziz, S. Abdel-aleem, and M. Heikal, “Physico-chemical and mechanical characteristics of pozzolanic cement pastes and mortars hydrated at different curing temperatures,” Construction and Building Materials, vol. 26, no. 1, pp. 310–316, 2012. View at Publisher · View at Google Scholar · View at Scopus
  24. G. Turuallo and M. N. Soutsos, “Supplementary cementitious materials: strength development of self-compacting concrete under different curing temperature,” Procedia Engineering, vol. 125, pp. 699–704, 2015. View at Publisher · View at Google Scholar
  25. J.-K. Kim, Y.-H. Moon, and S.-H. Eo, “Compressive strength development of concrete with different curing time and temperature,” Cement and Concrete Research, vol. 28, no. 12, pp. 1761–1773, 1998. View at Publisher · View at Google Scholar · View at Scopus
  26. K. Ezziane, A. Bougara, A. Kadri, H. Khelafi, and E. Kadri, “Compressive strength of mortar containing natural pozzolan under various curing temperature,” Cement and Concrete Composites, vol. 29, no. 8, pp. 587–593, 2007. View at Publisher · View at Google Scholar · View at Scopus
  27. T. Boubekeur, K. Ezziane, and E.-H. Kadri, “Estimation of mortars compressive strength at different curing temperature by the maturity method,” Computers and Chemical Engineering, vol. 71, pp. 299–307, 2014. View at Publisher · View at Google Scholar · View at Scopus
  28. R. V. Balendran and W. H. Martin-Buades, “The influence of high temperature curing on the compressive, tensile and flexural strength of pulverized fuel ash concrete,” Building and Environment, vol. 35, no. 5, pp. 415–423, 2000. View at Publisher · View at Google Scholar · View at Scopus
  29. H. H. Patel, C. H. Bland, and A. B. Poole, “The microstructure of concrete cured at elevated temperatures,” Cement and Concrete Research, vol. 25, no. 3, pp. 485–490, 1995. View at Publisher · View at Google Scholar · View at Scopus
  30. T. Y. Lo, A. Nadeem, W. C. P. Tang, and P. C. Yu, “The effect of high temperature curing on the strength and carbonation of pozzolanic structural lightweight concretes,” Construction and Building Materials, vol. 23, no. 3, pp. 1306–1310, 2009. View at Publisher · View at Google Scholar · View at Scopus
  31. K. Neupane, R. Sriravindrarajah, D. Baweja, and D. Chalmers, “Effect of curing on the compressive strength development in structural grades of geocement concrete,” Construction and Building Materials, vol. 94, pp. 241–248, 2015. View at Publisher · View at Google Scholar · View at Scopus
  32. Q. Wang, J. Feng, and P. Yan, “The microstructure of 4-year-old hardened cement-fly ash paste,” Construction and Building Materials, vol. 29, no. 4, pp. 114–119, 2012. View at Publisher · View at Google Scholar · View at Scopus
  33. X. Li, P. Yan, and Aruhan, “Assessment method of hydration degree of cement in complex binder based on the calcium hydroxide content,” Journal of the Chinese Ceramic Society, vol. 37, no. 10, pp. 1597–1601, 2009. View at Google Scholar · View at Scopus
  34. D. L. Kantro, S. Brunauer, and C. H. Weise, “Development of surface in the hydration of calcium silicates. II. Extension of investigations to earlier and later stages of hydration,” Journal of Physical Chemistry, vol. 66, no. 10, pp. 1804–1809, 1962. View at Publisher · View at Google Scholar · View at Scopus
  35. K. O. Kjellsen and R. J. Detwiler, “Reaction kinetics of portland cement mortars hydrated at different temperatures,” Cement and Concrete Research, vol. 22, no. 1, pp. 112–120, 1992. View at Publisher · View at Google Scholar · View at Scopus
  36. J. I. Escalante-García and J. H. Sharp, “Effect of temperature on the hydration of the main clinker phasesin Portland cements: part II, blended cements,” Cement and Concrete Research, vol. 28, no. 9, pp. 1259–1274, 1998. View at Publisher · View at Google Scholar · View at Scopus
  37. W. Ma, D. Sample, R. Martin, and P. W. Brown, “Calorimetric study of cement blends containing fly ash, silica fume, and slag at elevated temperatures,” Cement, Concrete & Aggregates, vol. 16, no. 2, pp. 93–99, 1994. View at Publisher · View at Google Scholar · View at Scopus
  38. W. Kurdowski and W. Nocuń-Wczelik, “The tricalcium silicate hydration in the presence of active silica,” Cement and Concrete Research, vol. 13, no. 3, pp. 341–348, 1983. View at Publisher · View at Google Scholar · View at Scopus
  39. J. M. Khatib and P. S. Mangat, “Influence of high-temperature and low-humidity curing on chloride penetration in blended cement concrete,” Cement and Concrete Research, vol. 32, no. 11, pp. 1743–1753, 2002. View at Publisher · View at Google Scholar · View at Scopus
  40. K. O. Kjellsen, “Heat curing and post-heat curing regimes of high- performance concrete: influence on microstructure and C-S-H composition,” Cement and Concrete Research, vol. 26, no. 2, pp. 295–307, 1996. View at Publisher · View at Google Scholar · View at Scopus
  41. X. Cong and R. J. Kirkpatrick, “Effects of the temperature and relative humidity on the structure of CSH gel,” Cement and Concrete Research, vol. 25, no. 6, pp. 1237–1245, 1995. View at Publisher · View at Google Scholar · View at Scopus
  42. Q. Wang, J. J. Feng, and P. Y. Yan, “An explanation for the negative effect of elevated temperature at early ages on the late-age strength of concrete,” Journal of Materials Science, vol. 46, no. 22, pp. 7279–7288, 2011. View at Publisher · View at Google Scholar · View at Scopus