Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017, Article ID 8575816, 7 pages
https://doi.org/10.1155/2017/8575816
Research Article

Corrosion and Strength Behaviors in Prestressed Tendon under Various Tensile Stress and Impressed Current Conditions

1School of Architecture, Chonnam National University, 77 Yongbong-ro, Buk-gu, Gwangju 61186, Republic of Korea
2Structural Engineering Research Institute, Korea Institute of Civil Engineering and Building Technology, 283 Daehwa-dong, Goyangdae-ro, Ilsanseo-gu, Goyang-si, Gyeonggi-do 10233, Republic of Korea
3Department of Civil and Construction Engineering, Faculty of Engineering and Science, Curtin University Sarawak, CDT 250, 98009 Miri, Sarawak, Malaysia
4Hanyang Experiment and Consulting Co., 1271 Sa 3-dong, Sangrok-gu, Ansan 15588, Republic of Korea
5Department of Civil and Environmental Engineering, Hannam University, Daejeon 34430, Republic of Korea

Correspondence should be addressed to S. J. Kwon; rk.ca.mannah@89inujj

Received 24 February 2017; Accepted 9 April 2017; Published 23 May 2017

Academic Editor: Xiao-Jian Gao

Copyright © 2017 Bang-Yeon Lee et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. M. Neville, Concrete Technology, Prentice Hall, 2010.
  2. American Concrete Institute, “Building code requirements for structural concrete and commentary,” ACI 318-11, ACI Committee 440, 2011. View at Google Scholar
  3. Z. Zhou, J. P. He, G. D. Chen, and J. P. Ou, “A smart steel strand for the evaluation of prestress loss distribution in post-tensioned concrete structures,” Journal of Intelligent Material Systems and Structures, vol. 20, no. 16, pp. 1901–1912, 2009. View at Publisher · View at Google Scholar · View at Scopus
  4. F.-Z. Xuan, H. Tang, and S.-T. Tu, “In situ monitoring on prestress losses in the reinforced structure with fiber-optic sensors,” Measurement, vol. 42, no. 1, pp. 107–111, 2009. View at Publisher · View at Google Scholar · View at Scopus
  5. F. Li, Y. Yuan, and C.-Q. Li, “Corrosion propagation of prestressing steel strands in concrete subject to chloride attack,” Construction and Building Materials, vol. 25, no. 10, pp. 3878–3885, 2011. View at Publisher · View at Google Scholar · View at Scopus
  6. F. Li and Y. Yuan, “Effects of corrosion on bond behavior between steel strand and concrete,” Construction and Building Materials, vol. 38, pp. 413–422, 2013. View at Publisher · View at Google Scholar · View at Scopus
  7. A. P. Halsall, W. E. Welch, and S. M. Treparier, “Acoustic monitoring technology for concrete structures,” in Proceeding of the FIP Symposium 1996 on Post-Tensioned Concrete Structures, pp. 483–491, The Concrete Society, 1996.
  8. R. J. Woodward and F. W. Williams, “Collapse of YNS-Y-GWAS bridge, GLAMORGAN,” Proceedings of the Institute of Civil Engineers, vol. 84, part 1, pp. 635–669, 1988. View at Google Scholar
  9. Z. Zhao-Hui Lu, F. Li, and Y. G. Zhao, in Proceeding of the 4th International Conference of the Durability of Concrete Structures, pp. 57–65, Purdue University, USA, 2016.
  10. European-Standard, “Design of concrete structure,” EN 1992-1-1, 2004. View at Google Scholar
  11. Japan Society of Civil Engineering, Standard specification for concrete structures-Design, JSCE- Guidelines for Concrete, 15 edition, 2012.
  12. S. H. Kim, J. G. Choi, S. M. Ham, and W. H. Heo, “Reliability evaluation of a PSC highway bridge based on resistance capacity degradation due to a corrosive environment,” Applied Sciences, vol. 6, no. 12, p. 423, 2016. View at Google Scholar
  13. L. Dai, L. Wang, J. Zhang, and X. Zhang, “A global model for corrosion-induced cracking in prestressed concrete structures,” Engineering Failure Analysis, 2015. View at Publisher · View at Google Scholar · View at Scopus
  14. W. Podolny Jr., “Corrosion of prestressing steels and its mitigation,” Special Report, PCI Journal, pp. 34–55, 1992. View at Google Scholar
  15. H. Shuxian, W. Herbert, H. Rosemarie, D. Biqin, D. Peng, and X. Feng, “Long-term monitoring of reinforcement corrosion in concrete using ground penetrating radar,” Corrosion Science, vol. 114, no. 1, pp. 123–132, 2017. View at Google Scholar
  16. S. G. Youn, S. K. Cho, and E. K. Kim, “Acoustic emission technique for detection of corrosion-induced wire fracture,” Key Engineering Materials, vol. 297–300, pp. 2040–2045, 2005. View at Publisher · View at Google Scholar · View at Scopus
  17. G. G. Clemena and W. T. McKeel, “Detection of delamination in bridge decks with infrared thermography,” Transportation Research Record, no. 664, pp. 25–85, 1978. View at Google Scholar
  18. S. Baek, W. Xue, M. Q. Feng, and S. Kwon, “Nondestructive corrosion detection in RC through integrated heat induction and IR thermography,” Journal of Nondestructive Evaluation, vol. 31, no. 2, pp. 181–190, 2012. View at Publisher · View at Google Scholar · View at Scopus
  19. J. P. Broomfield, Corrosion of Steel in Concrete: Understanding, Investigation and Repair, E&FN, London, UK, 1997.
  20. MMFX Technologies Corp, “Comparative correlative corrosion testing and analysis of MMFX 2 rebars for reinforced concrete applications,” WJE Final Report 2003.0707.0, 2008. View at Google Scholar
  21. S. J. Kwon and S. S. Park, “Non destructive technique for steel corrosion detection using heat induction and ir thermography,” Journal of the Korea Institute for Structural Maintenance and Inspection, vol. 16, no. 2, pp. 40–48 (Chinese), 2012 (Korean).
  22. S. Sakurada, H. Irie, and Y. Yoshida, “Development of reinforced concrete corrosion amount presumption method by ultrasonic method,” in Proceedings of the 17th World Conference on Nondestructive Testing, pp. 1–6, Shanghai, China, 2008.