A Review of Additive Mixed-Electric Discharge Machining: Current Status and Future Perspectives for Surface Modification of Biomedical Implants

<div>SEM micrograph: (a) Ti-6Al-4V after calcium deposition by AM-EDM; (b) uniformly distributed porous layers. Copyright @Elsevier, reproduced with permission from Elsevier [<a href="/journals/amse/2017/8723239/#B129">136</a>].</div>

Advances in Materials Science and Engineering

fig19

Figure 19

Figure 19: A Review of Additive Mixed-Electric Discharge Machining: Current Status and Future Perspectives for Surface Modification of Biomedical Implants 

Figure 19 | A Review of Additive Mixed-Electric Discharge Machining: Current Status and Future Perspectives for Surface Modification of Biomedical Implants 