Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017 (2017), Article ID 8753659, 12 pages
https://doi.org/10.1155/2017/8753659
Research Article

Improving the Quality of Mixed Recycled Coarse Aggregates from Construction and Demolition Waste Using Heavy Media Separation with Fe3O4 Suspension

1Department of Energy, Minerals and Resources Engineering, Dong-A University, 37 Nakdong-Daero 550Beon-gil, Saha-gu, Busan 604-714, Republic of Korea
2Department of Architectural Engineering, Dong-A University, 37 Nakdong-Daero 550Beon-gil, Saha-gu, Busan 604-714, Republic of Korea

Correspondence should be addressed to Seong-Hoon Kee

Received 6 July 2016; Revised 8 November 2016; Accepted 9 November 2016; Published 2 January 2017

Academic Editor: Carlo Santulli

Copyright © 2017 Heonchan Kang and Seong-Hoon Kee. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. S. de Juan and P. A. Gutiérrez, “Study on the influence of attached mortar content on the properties of recycled concrete aggregate,” Construction and Building Materials, vol. 23, no. 2, pp. 872–877, 2009. View at Publisher · View at Google Scholar · View at Scopus
  2. C. S. Poon, Z. H. Shui, and L. Lam, “Effect of microstructure of ITZ on compressive strength of concrete prepared with recycled aggregates,” Construction and Building Materials, vol. 18, no. 6, pp. 461–468, 2004. View at Publisher · View at Google Scholar · View at Scopus
  3. RILEM Recommendation, “Specifications for concrete with recycled aggregates,” Materials and Structures, vol. 27, no. 9, pp. 557–559, 1994. View at Publisher · View at Google Scholar
  4. AS, Particle Density and Water Absorption of Aggregates (AS 1141.6.2-1996), Austrilian Standard, Sydney, Australia, 1996.
  5. KS F 2573, Recycled Aggregates for Concrete, Korean Industrial Standards, Seoul, Republic of Korea, 1999.
  6. DIN, “Aggregates for mortar and concrete—part 100: recycled aggregates,” DIN 4226-100, Deutsches Institut für Normung, Berlin, Germany, 2002. View at Google Scholar
  7. Japanese Standards Association, “Japan Industrial Standard-Recycled aggregate for concrete, Class H,” JIS A 5021-2005, Japanese Standards Association, Tokyo, Japan, 2005. View at Google Scholar
  8. Japanese Standards Association, “Japan Industrial Standard-Recycled aggregate for concrete, Class M,” JIS A 5022-2005, Japanese Standards Association, Tokyo, Japan, 2005. View at Google Scholar
  9. Japanese Standards Association, “Japan industrial standard—recycled aggregate for concrete, Class L,” JIS A 5023-2005, Japanese Standards Association, Tokyo, Japan, 2005. View at Google Scholar
  10. S. Nagataki, A. Gokce, T. Saeki, and M. Hisada, “Assessment of recycling process induced damage sensitivity of recycled concrete aggregates,” Cement and Concrete Research, vol. 34, no. 6, pp. 965–971, 2004. View at Publisher · View at Google Scholar · View at Scopus
  11. V. W. Y. Tam, C. M. Tam, and K. N. Le, “Removal of cement mortar remains from recycled aggregate using pre-soaking approaches,” Resources, Conservation and Recycling, vol. 50, no. 1, pp. 82–101, 2007. View at Publisher · View at Google Scholar · View at Scopus
  12. H. Shima, H. Tateyashiki, R. Matsuhashi, and Y. Yoshida, “An advanced concrete recycling technology and its applicability assessment through input-output analysis,” Journal of Advanced Concrete Technology, vol. 3, no. 1, pp. 53–67, 2005. View at Publisher · View at Google Scholar · View at Scopus
  13. L. Kiss and K. Schonert, “Liberation of two-component material by single particle compression and impact crushing,” Aufbereitungs Technik, vol. 30, no. 5, pp. 223–230, 1980. View at Google Scholar
  14. E. Linß and A. Mueller, “High-performance sonic impulses—An alternative method for processing of concrete,” International Journal of Mineral Processing, vol. 74, pp. S199–S208, 2004. View at Publisher · View at Google Scholar · View at Scopus
  15. K. Bru, S. Touzé, F. Bourgeois, N. Lippiatt, and Y. Ménard, “Assessment of a microwave-assisted recycling process for the recovery of high-quality aggregates from concrete waste,” International Journal of Mineral Processing, vol. 126, pp. 90–98, 2014. View at Publisher · View at Google Scholar · View at Scopus
  16. I. Vegas, K. Broos, P. Nielsen, O. Lambertz, and A. Lisbona, “Upgrading the quality of mixed recycled aggregates from construction and demolition waste by using near-infrared sorting technology,” Construction and Building Materials, vol. 75, pp. 121–128, 2015. View at Publisher · View at Google Scholar · View at Scopus
  17. S. C. Angulo, P. M. Carrijo, A. D. Figueiredo, A. P. Chaves, and V. M. John, “On the classification of mixed construction and demolition waste aggregate by porosity and its impact on the mechanical performance of concrete,” Materials and Structures, vol. 43, no. 4, pp. 519–528, 2010. View at Publisher · View at Google Scholar · View at Scopus
  18. C. Ulsen, H. Kahn, G. Hawlitschek, E. A. Masini, S. C. Angulo, and V. M. John, “Production of recycled sand from construction and demolition waste,” Construction and Building Materials, vol. 40, pp. 1168–1173, 2013. View at Publisher · View at Google Scholar · View at Scopus
  19. ASTM, “Standard Test Method for lightweight particles in aggregate,” ASTM C 1231998, American Society of Testing Materials, 1998. View at Google Scholar
  20. S. C. Angulo, C. Ulsen, P. M. Carrijo, V. M. John, and H. Kahn, “Characterization of Brazilian construction and demolition waste coarse recycled aggregate,” in Proceedings of the International RILEM Conference on the Use of Recycled Materials in Building and Structures, RILEM Publications SARL, 2004.
  21. M.-G. Lee, K.-O. Kwon, G. Gayabazar, and H.-C. Kang, “Separation of recycled aggregates from waste concrete by heavy medium separation,” in Proceedings of the in The 9th International Symposium on East Asian Resources Recycling Technology, Sendai, Japan, 2007.
  22. B. Klein, Rheology and Stability of Magnetite Dense Media, Department of Mining and Mineral Process Engineering, The University of British Columbia, 1992.
  23. ASTM, “Standard test method for specific gravity and absorption of coarse aggregate,” ASTM C 127, Amerian Society of Testing Materials, 1993. View at Google Scholar
  24. ASTM, “Standard practice for making and curing concrete test specimen in the field,” ASTM C 31-2012, Amerian Society of Testing Materials, 2012. View at Google Scholar
  25. ASTM, “Standard test method for compressive strength of cylindrical concrete specimen,” ASTM C 39-2014, Amerian Society of Testing Materials, 2014. View at Google Scholar
  26. A. Abbas, G. Fathifazl, B. Fournier et al., “Quantification of the residual mortar content in recycled concrete aggregates by image analysis,” Materials Characterization, vol. 60, no. 7, pp. 716–728, 2009. View at Publisher · View at Google Scholar · View at Scopus
  27. V. W. Y. Tam, X. F. Gao, C. M. Tam, and C. H. Chan, “New approach in measuring water absorption of recycled aggregates,” Construction and Building Materials, vol. 22, no. 3, pp. 364–369, 2008. View at Publisher · View at Google Scholar · View at Scopus
  28. S. Mindness, J. F. Young, and D. Darwin, Concrete, Prentice Hall, New York, NY, USA, 2003.
  29. I. Ugur, S. Demirdag, and H. Yavuz, “Effect of rock properties on the Los Angeles abrasion and impact test characteristics of the aggregates,” Materials Characterization, vol. 61, no. 1, pp. 90–96, 2010. View at Publisher · View at Google Scholar · View at Scopus
  30. M. Etxeberria, E. Vázquez, A. Marí, and M. Barra, “Influence of amount of recycled coarse aggregates and production process on properties of recycled aggregate concrete,” Cement and Concrete Research, vol. 37, no. 5, pp. 735–742, 2007. View at Publisher · View at Google Scholar · View at Scopus
  31. J. Xiao, J. Li, and C. Zhang, “Mechanical properties of recycled aggregate concrete under uniaxial loading,” Cement and Concrete Research, vol. 35, no. 6, pp. 1187–1194, 2005. View at Publisher · View at Google Scholar · View at Scopus