Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017 (2017), Article ID 8906708, 10 pages
https://doi.org/10.1155/2017/8906708
Research Article

The Performance and Mechanism Analysis of Cement Pastes Added to Aluminum Sulfate-Based Low-Alkali Setting Accelerator

1Changjiang River Scientific Research Institute of Changjiang Water Resources Commission, Wuhan 430010, China
2State Key Laboratory of Silicate Materials for Architecture, Wuhan University of Technology, Wuhan 430070, China

Correspondence should be addressed to Xingdong Lv

Received 30 June 2016; Revised 17 October 2016; Accepted 24 October 2016; Published 31 January 2017

Academic Editor: Sverak Tomas

Copyright © 2017 Xingdong Lv et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. Wang, D. Niu, S. Ding, Z. Mi, and D. Luo, “Microstructure, permeability and mechanical properties of accelerated shotcrete at different curing age,” Construction and Building Materials, vol. 78, pp. 203–216, 2015. View at Publisher · View at Google Scholar · View at Scopus
  2. J.-P. Won, U.-J. Hwang, C.-K. Kim, and S.-J. Lee, “Mechanical performance of shotcrete made with a high-strength cement-based mineral accelerator,” Construction and Building Materials, vol. 49, pp. 175–183, 2013. View at Publisher · View at Google Scholar · View at Scopus
  3. J. Wang, D. Niu, and Y. Zhang, “Mechanical properties, permeability and durability of accelerated shotcrete,” Construction and Building Materials, vol. 95, pp. 312–328, 2015. View at Publisher · View at Google Scholar · View at Scopus
  4. C. Maltese, C. Pistolesi, A. Bravo, F. Cella, T. Cerulli, and D. Salvioni, “A case history: effect of moisture on the setting behaviour of a Portland cement reacting with an alkali-free accelerator,” Cement and Concrete Research, vol. 37, no. 6, pp. 856–865, 2007. View at Publisher · View at Google Scholar · View at Scopus
  5. C. K. Y. Leung, R. Lai, and A. Y. F. Lee, “Properties of wet-mixed fiber reinforced shotcrete and fiber reinforced concrete with similar composition,” Cement and Concrete Research, vol. 35, no. 4, pp. 788–795, 2005. View at Publisher · View at Google Scholar · View at Scopus
  6. C. Snyder Raymond and F. Snyder Paul, Liquid concrete acelerator mixtures and methods for use thereof USA, 4046584, September 1997.
  7. S. A. Austin and P. J. Robins, Sprayed Concrete Properties, Design and Application, McGraw-Hill, London, UK, 1995.
  8. L. R. Prudêncio Jr., “Accelerating admixtures for shotcrete,” Cement and Concrete Composites, vol. 20, no. 2-3, pp. 213–219, 1998. View at Publisher · View at Google Scholar · View at Scopus
  9. EN 934-5, Admixture for Sprayed Concrete-Definitions, Requirements, Conformity, Marking and Labelling, Standards Policy and Strategy Committee, 2007.
  10. Z. Pan, X. Wang, and W. Liu, “Properties and acceleration mechanism of cement mortar added with low alkaline liquid state setting accelerator,” Journal Wuhan University of Technology, Materials Science Edition, vol. 29, no. 6, pp. 1196–1200, 2014. View at Publisher · View at Google Scholar · View at Scopus
  11. X. Xin and D. Qingjun, “Summary of cement rapid-setting adition and their mechanism researches,” Journal of Wuhan University of Technology, vol. 21, no. 1, pp. 28–30, 1999. View at Google Scholar
  12. L. Chen, L. Shizong, W. Yanrong, and Y. Bilan, “Study on the accelerating mechanism of accelerators in concrete,” Journal of Building Materials, vol. 3, no. 2, pp. 175–181, 2000. View at Google Scholar
  13. R. Wang, X.-G. Li, and P.-M. Wang, “Influence of polymer on cement hydration in SBR-modified cement pastes,” Cement and Concrete Research, vol. 36, no. 9, pp. 1744–1751, 2006. View at Publisher · View at Google Scholar · View at Scopus
  14. A. Peschard, A. Govin, P. Grosseau, B. Guilhot, and R. Guyonnet, “Effect of polysaccharides on the hydration of cement paste at early ages,” Cement and Concrete Research, vol. 34, no. 11, pp. 2153–2158, 2004. View at Publisher · View at Google Scholar · View at Scopus
  15. C. Paglia, F. Wombacher, and H. Böhni, “The influence of alkali-free and alkaline shotcrete accelerators within cement systems: influence of the temperature on the sulfate attack mechanisms and damage,” Cement and Concrete Research, vol. 33, no. 3, pp. 387–395, 2003. View at Publisher · View at Google Scholar · View at Scopus
  16. S. Zhenping, J. Zhengwu, and W. Peiming, “Measures to improve compatibility between concrete admixtures and cement,” Journal of Building Materials, vol. 6, no. 4, pp. 404–409, 2003. View at Google Scholar
  17. D. Niu, J. Wang, and Y. Wang, “Effect of hydration aging and water binder ratio on microstructure and mechanical properties of sprayed concrete,” Journal Wuhan University of Technology, Materials Science Edition, vol. 30, no. 4, pp. 745–751, 2015. View at Publisher · View at Google Scholar · View at Scopus
  18. Y. Runzhang, Cementitious Materials Science, Wuhan University of Technology Press, Wuhan, China, 2006.
  19. I. Odler and S. Abdul-Maula, “Possibilities of quantitative determination of the AFt-(ettringite) and AFm-(monosulphate) phases in hydrated cement pastes,” Cement and Concrete Research, vol. 14, no. 1, pp. 133–141, 1984. View at Publisher · View at Google Scholar · View at Scopus
  20. W. Prince, M. Espagne, and P.-C. Aitcin, “Ettringite formation: a crucial step in cement superplasticizer compatibility,” Cement and Concrete Research, vol. 33, no. 5, pp. 635–641, 2003. View at Publisher · View at Google Scholar · View at Scopus
  21. G. Li, T. He, D. Hu, and C. Shi, “Effects of two retarders on the fluidity of pastes plasticized with aminosulfonic acid-based superplasticizers,” Construction and Building Materials, vol. 26, no. 1, pp. 72–78, 2012. View at Publisher · View at Google Scholar · View at Scopus
  22. H. Chang, P. J. Huang, and S. C. Hou, “Application of thermo-Raman spectroscopy to study dehydration of CaSO4·2H2O and CaSO4·0.5H2O,” Materials Chemistry and Physics, vol. 58, no. 1, pp. 12–19, 1999. View at Publisher · View at Google Scholar · View at Scopus
  23. J. Bensted and S. P. Varma, “Some applications of infrared and Raman spectroscopy in cement chemistry Part 3. Hydration of portland cement and its constituents,” Cement Technology, vol. 5, no. 5, pp. 5440–5450, 1974. View at Google Scholar · View at Scopus
  24. E. Berodier and K. Scrivener, “Evolution of pore structure in blended systems,” Cement and Concrete Research, vol. 73, pp. 25–35, 2015. View at Publisher · View at Google Scholar · View at Scopus
  25. Z. Wu and H. Lian, High Performance Concrete, Railway Publishing House, Beijing, China, 1999.
  26. J. Wang, J. Song, K. Liu, and D. Wang, “Study on the low alkali liquid flash setting admixture of aluminum sulfate for shotcrete,” Concrete, vol. 302, no. 12, pp. 84–87, 2014. View at Google Scholar