Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017, Article ID 9304038, 7 pages
https://doi.org/10.1155/2017/9304038
Research Article

Simulation of Solidified Microstructure and Experimental Comparative Study of Twin-Roll Casting Aluminum Alloys

1School of Materials Science and Engineering, Taiyuan University of Science and Technology, Taiyuan 030024, China
2Huake Institute, Taiyuan University of Science and Technology, Taiyuan 030024, China
3School of Applied Science, Taiyuan University of Science and Technology, Taiyuan 030024, China

Correspondence should be addressed to Xiaochao Cui; moc.uhos@oahcoaixiuc

Received 12 April 2017; Accepted 18 June 2017; Published 2 October 2017

Academic Editor: Paolo Ferro

Copyright © 2017 Teng Ma et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. P. D. Ding, B. Jing, C. M. Yang, and L. Fang, “Development and thought of thin-strip continuous casting,” The Chinese Journal of Nonferrous Metals, vol. 14, no. S1, pp. s192–s196, 2004. View at Google Scholar
  2. H. S. Di, P. W. Bao, Y. C. Miao, G. D. Wang, and X. H. Liu, “Experimental study on the twin roll strip casting and analysis of processing stability,” Journal of Northeastern University (Natural Science), vol. 21, no. 3, pp. 274–277, 2000. View at Google Scholar
  3. Y. Birol, “Analysis of macro segregation in twin-roll cast aluminium strips via solidification curves,” Journal of Alloys and Compounds, vol. 486, no. 1-2, pp. 168–172, 2009. View at Publisher · View at Google Scholar · View at Scopus
  4. C. Gras, M. Meredith, and J. D. Hunt, “Microstructure and texture evolution after twin roll casting and subsequent cold rolling of Al-Mg-Mn aluminium alloys,” Journal of Materials Processing Technology, vol. 169, no. 2, pp. 156–163, 2005. View at Publisher · View at Google Scholar · View at Scopus
  5. H.-L. Mao, J.-H. Wang, G. Yang, Q.-N. Shi, J.-H. Yi, and L.-W. Chen, “Characterization of microstructure of 1235 aluminum alloy sheet produced by twin roll casting,” The Chinese Journal of Nonferrous Metals, vol. 24, no. 4, pp. 863–869, 2014. View at Google Scholar · View at Scopus
  6. M. C. Flemings and R. W. Cahn, “Organization and trends in materials science and engineering education in the US and Europe,” Acta Materialia, vol. 48, no. 1, pp. 371–383, 2000. View at Publisher · View at Google Scholar · View at Scopus
  7. K. Shibuya, F. Kogiku, M. Yukumoto, S. Miyake, M. Ozawa, and T. Kan, “Development of a rapid solidification process with a double-roller method,” Materials Science and Engineering, vol. 98, pp. 25–28, 1988. View at Publisher · View at Google Scholar · View at Scopus
  8. X.-B. Liu, Q.-Y. Xu, T. Jing, and B.-C. Liu, “Microstructure of aluminum twin-roll casting based on Cellular Automation,” Transactions of Nonferrous Metals Society of China (English Edition), vol. 18, no. 4, pp. 944–948, 2008. View at Publisher · View at Google Scholar · View at Scopus
  9. S. D. Chen and J. C. Chen, “Micro-model of simulation on twin-roll continuous casting thin strip solidification structure,” Rare Metal Materials and Engineering, vol. 42, no. 1, pp. 14–18, 2013. View at Google Scholar
  10. F. Huang, H. S. Di, and G. S. Wang, “Numerical simulation on solidification microstructure evolution in twin-roll casting process,” Casting. Forging. Welding, vol. 40, no. 5, pp. 57–60, 2011. View at Google Scholar
  11. J.-H. Cho, H.-W. Kim, C.-Y. Lim, and S.-B. Kang, “Microstructure and mechanical properties of Al-Si-Mg alloys fabricated by twin roll casting and subsequent symmetric and asymmetric rolling,” Metals and Materials International, vol. 20, no. 4, pp. 647–652, 2014. View at Publisher · View at Google Scholar · View at Scopus
  12. H. Harada, S. Nishida, E. Masaki, and H. Watari, “Casting of high-aluminum-content Mg alloys strip by a horizontal twin-roll caster,” Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, vol. 45, no. 2, pp. 427–437, 2014. View at Publisher · View at Google Scholar · View at Scopus
  13. S. J. Yao, X. K. Wang, J. Xu, N. M. Han, and S. K Guan, “Microstructure analysis of cast rolling 1235 aluminum alloy plates,” Light Alloy Fabrication Technology, vol. 42, no. 4, pp. 30–34, 2014. View at Google Scholar
  14. S. M. Xiong, Q. Y. Xu, and J. W. Kang, Modeling and Simulation Technology in Casting Process, China Machine Press, Beijing, China, 2004.
  15. Ch.-A. Gandin and M. Rappaz, “A coupled finite element-cellular automaton model for the prediction of dendritic grain structures in solidification processes,” Acta Metallurgica et Materialia, vol. 42, no. 7, pp. 2233–2246, 1994. View at Publisher · View at Google Scholar · View at Scopus
  16. M. B. Yang, F. S. Pan, X. D. Peng, and P. D. Ding, “Macroscopic and microscopic coupling mathematical model,” Journal of Chongqing University (Natural Science Edition), vol. 28, no. 5, pp. 39–44, 2005. View at Google Scholar
  17. B. Y. Sun, Direct Strip Casting of Metals and Alloys Processing, Microstructure and Properties, National Defense Industry Press, Beijing, China, 2014.
  18. B. Y. Hang, C. G. Li, L. K. Shi, G. Z. Qiu, and T. Y. Zuo, Chinese Materials Dictionary Book 4, China Material Engineering Canon, 2008.