Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017, Article ID 9324271, 7 pages
https://doi.org/10.1155/2017/9324271
Research Article

Testing of Microalloyed Steel Quality under Creep Conditions for a New Intended Use

Institute of Materials, Faculty of Metallurgy, Technical University of Košice, Letná 9, 040 02 Košice, Slovakia

Correspondence should be addressed to Mária Mihaliková; ks.ekut@avokilahim.airam

Received 11 April 2017; Revised 8 June 2017; Accepted 14 June 2017; Published 18 July 2017

Academic Editor: Patrice Berthod

Copyright © 2017 Mária Mihaliková et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. Michel, M. Buršák, and I. Mamuzić, “Creep properties of microalloyed steels,” Metalurgija, vol. 41, no. 2, pp. 71–76, 2002. View at Google Scholar · View at Scopus
  2. C. Chen, H. Yen, F. Kao et al., “Precipitation hardening of high-strength low-alloy steels by nanometer-sized carbides,” Materials Science and Engineering: A, vol. 499, no. 1-2, pp. 162–166, 2009. View at Publisher · View at Google Scholar
  3. W. Yan, W. Wang, Y. Shan, K. Yang, and W. Sha, “Creep of Heat-Resistant Steels,” in 9-12Cr Heat-Resistant Steels, Engineering Materials, pp. 163–189, Springer International Publishing, Cham, Switzerland, 2015. View at Publisher · View at Google Scholar
  4. H. G. Svoboda and H. C. Nadale, “Fatigue Life of GMAW and PAW Welding Joints of Boron Microalloyed Steels,” Procedia Materials Science, vol. 9, pp. 419–427, 2015. View at Publisher · View at Google Scholar
  5. M. Pirinen, The Effects of Welding Heat Input on the Usability of High Strength Steels in Welded Structures [Ph.D. Thesis], Acta Universitatis Lappeenrantaensis 514, Lappeenranta University of Technology, Lappeenranta, Finland, 2013.
  6. Natoli Free Whitepaper: Steel Quality. Retrieved from Natoli Engineering Company, Inc., Available online: https://natoli.com/about/steel-quality/ (12th December 2016).
  7. M. Cabibbo, A. Fabrizi, M. Merlin, and G. L. Garagnani, “Effect of thermo-mechanical treatments on the microstructure of micro-alloyed low-carbon steels,” Journal of Materials Science, vol. 43, no. 21, pp. 6857–6865, 2008. View at Publisher · View at Google Scholar · View at Scopus
  8. E. P. Degarmo, J. T. Black, and R. A. Kohser, Materials and Processes in Manufacturing, Wiley, Hoboken, NJ, USA, 11 edition, 2011.
  9. ISO 6892-1:2009 Metallic materials – Tensile testing Part 1: Method of test at room temperature, Geneva, Switzerland, 2009.
  10. ISO 6892-1:2011 Metallic materials – Tensile testing Part 2: Method of test at elevated temperature, Geneva, Switzerland, 2011.
  11. X. Xiao, G. Liu, B. Hu, J. Wang, and W. Ma, “Microstructure Stability of V and Ta Microalloyed 12%Cr Reduced Activation Ferrite/Martensite Steel during Long-term Aging at 650°C,” Journal of Materials Science and Technology, vol. 31, no. 3, pp. 311–319, 2015. View at Publisher · View at Google Scholar · View at Scopus
  12. A. Raj, B. Goswami, and A. K. Ray, “Perspectives of creep and fatigue behavior in microalloyed steel,” Journal of Metallurgy and Materials Science, vol. 54, no. 2, pp. 93–110, 2012. View at Google Scholar
  13. M. Mihaliková, V. Girman, and A. Lišková, “Static and dynamic tensile characteristics of S420 and if steel sheets,” Materiali in Tehnologije, vol. 50, no. 4, pp. 543–546, 2016. View at Publisher · View at Google Scholar · View at Scopus
  14. Y. Xu and S. Song, “Impurity antimony-induced creep property deterioration and its suppression by rare earth ceriumfor a 9Cr-1Mo ferritic heat-resistant steel,” Metals, vol. 6, no. 8, article no. 187, 2016. View at Publisher · View at Google Scholar · View at Scopus
  15. D. Nakhaie, P. Hosseini Benhangi, M. Mazinani, F. Fazeli, and M. R. G. Ferdowsi, “Thermomechanical processing of a Nb-microalloyed steel in a controlled-forging treatment,” Advanced Materials Research, vol. 409, pp. 835–840, 2012. View at Publisher · View at Google Scholar · View at Scopus
  16. ISO 204:2009, Metallic materials – Uniaxial creep testing in tension – Method of test, 2009.
  17. I. Tylek and K. Kuchta, “Mechanical Properties of Structural Stainless Steels,” Technical Transactions, vol. 4, pp. 60–79, 2014. View at Google Scholar
  18. C. Wen, T. Xu, and K. Guan, “Correlation factor study of small punch creep test and its life prediction,” Materials, vol. 9, no. 10, article no. 796, 2016. View at Publisher · View at Google Scholar · View at Scopus
  19. A. Raj, B. Goswami, and A. K. Ray, “Creep and fatigue behavior in micro-alloyed steels - A review,” High Temperature Materials and Processes, vol. 33, no. 1, pp. 1–12, 2014. View at Publisher · View at Google Scholar · View at Scopus
  20. I. M. Nowak, H. E. Evans, B. J. Connolly, D. Flahaut, and Z. Zhang, “Origins of tertiary creep in microalloyed 25Cr-35Ni centrifugally cast alloy tubes,” Materials at High Temperatures, vol. 31, no. 3, pp. 191–197, 2014. View at Publisher · View at Google Scholar · View at Scopus
  21. M. Mihaliková, M. Német, and M. Vojtko, “IF steel effect of rate deformation on the fracture surface change,” Key Engineering Materials, vol. 635, pp. 118–121, 2015. View at Publisher · View at Google Scholar · View at Scopus
  22. D. Liu, D. J. Pons, and E.-H. Wong, “The unified creep-fatigue equation for stainless steel 316,” Metals, vol. 6, no. 9, article no. 219, 2016. View at Publisher · View at Google Scholar · View at Scopus
  23. G. González, R. Molina, M. Delavalle, and L. Moro, “Variation of Creep Resistance in Ferritic Steels by a Heat Treatment,” Procedia Materials Science, vol. 9, pp. 412–418, 2015. View at Publisher · View at Google Scholar