Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017 (2017), Article ID 9523174, 7 pages
https://doi.org/10.1155/2017/9523174
Research Article

Study on the Effect of Different Fe2O3/ZrO2 Ratio on the Properties of Silicate Glass Fibers

1International Institute for Urban Systems Engineering, Southeast University, Nanjing 210096, China
2National & Local Joint Engineering Research Center of “Basalt Fiber Production and Application”, Southeast University, Nanjing 210096, China

Correspondence should be addressed to Zhishen Wu; nc.ude.ues@uwsz

Received 14 April 2017; Accepted 21 August 2017; Published 28 September 2017

Academic Editor: Belal F. Yousif

Copyright © 2017 Jianxun Liu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. K. J. Huang and M. Deng, “Stability of basalt fibers in alkaline solution and its effect on the mechanical property of concrete,” Acta Materiae Compositae Sinica, vol. 27, pp. 150–154, 2010. View at Google Scholar
  2. Y. V. Lipatov, S. I. Gutnikov, M. S. Manylov, E. S. Zhukovskaya, and B. I. Lazoryak, “High alkali-resistant basalt fiber for reinforcing concrete,” Materials and Design, vol. 73, pp. 60–66, 2015. View at Publisher · View at Google Scholar · View at Scopus
  3. Z. Li, T. Xiao, Q. Pan, J. Cheng, and S. Zhao, “Corrosion behaviour and mechanism of basalt fibres in acidic and alkaline environments,” Corrosion Science, vol. 110, pp. 15–22, 2016. View at Publisher · View at Google Scholar · View at Scopus
  4. F. Z. Li, G. C. Li, H. M. Wang, and Q. Tong, “Effect of acid/alkali corrosion on properties of basalt fiber yarn,” Materials Review, vol. 29, pp. 110–113, 2015. View at Google Scholar
  5. M. C. Wang, Z. G. Zhang, Z. J. Sun, and M. Li, “Corrosion resistance characteristic of continuous basalt fiber and its reinforcing composites,” Journal of Beijing University of Aeronautics and Astronautics, vol. 32, no. 10, pp. 1255–1258, 2006. View at Google Scholar · View at Scopus
  6. W. J. Huo, Z. G. Zhang, M. C. Wang, Z. J. Sun, and M. Li, “Experimental study on acid and alkali resistance of basalt fiber used for composites,” Acta Materiae Compositae Sinica, vol. 24, pp. 77–82, 2008. View at Google Scholar
  7. X. Zhao, X. Wang, Z. S. Wu, and Z. G. Zhu, “Fatigue behavior and failure mechanism of basalt FRP composites under long-term cyclic loads,” International Journal of Fatigue, vol. 88, pp. 58–67, 2016. View at Publisher · View at Google Scholar
  8. B. Wei, H. Cao, and S. Song, “Tensile behavior contrast of basalt and glass fibers after chemical treatment,” Materials and Design, vol. 31, no. 9, pp. 4244–4250, 2010. View at Publisher · View at Google Scholar · View at Scopus
  9. Y. H. Cui, “Primary properties of basalt continuous filament,” Journal of Textile Research, vol. 26, pp. 120-121, 2005. View at Google Scholar
  10. V. Fiore, T. Scalici, G. D. Bella, and A. Valenza, “A review on basalt fibre and its composites,” Composites Part B: Engineering, vol. 74, pp. 74–94, 2015. View at Publisher · View at Google Scholar · View at Scopus
  11. D. H. Qi, S. B. Qi, X. Q. Liu, and H. K. Wang, “Study on the application of high zirconia AR glass fiber,” Fiber Glass, vol. 5, pp. 28–33, 2015. View at Google Scholar
  12. F. M. Li, “Application of glass fiber-reinforced concrete to engineerings,” Engineering Journal of Wuhan University, supplement 1, pp. 504–506, 2007. View at Google Scholar
  13. Y. V. Lipatov, S. I. Gutnikov, M. S. Manylov, and B. I. Lazoryak, “Effect of ZrO2 on the alkali resistance and mechanical properties of basalt fibers,” Inorganic Materials, vol. 48, no. 7, pp. 751–756, 2012. View at Publisher · View at Google Scholar · View at Scopus
  14. Y. V. Lipatov, I. V. Arkhangelsky, A. V. Dunaev, S. I. Gutnikov, M. S. Manylov, and B. I. Lazoryak, “Crystallization of zirconia doped basalt fibers,” Thermochimica Acta, vol. 575, pp. 238–243, 2014. View at Publisher · View at Google Scholar · View at Scopus
  15. Y. K. Wu, F. H. Gong, and D. R. Sha, “Study of alkali resistance of fiber glass,” Fiber Glass, vol. 4, pp. 6–14, 2004. View at Google Scholar
  16. M. C. Yang, M. L. Jiang, H. Zhang, and L. H. Shen, “Study on mechanism of zirconium containing alkali resistant glass fiber,” Journal of the Chinese Ceramic Society, vol. 15, pp. 61–68, 1987. View at Google Scholar
  17. M. Ryoo, “New alkali resistant glass and alkali resistant mechanism,” Fiber Glass, vol. 2, pp. 37–42, 1982. View at Google Scholar
  18. C. R. Kurkjian and E. A. Sigety, “Coordination of the ferric ion in glass,” Physics and Chemistry of Glasses, vol. 9, pp. 73–83, 1968. View at Google Scholar
  19. R. A. Levy, C. H. P. Lupis, and P. A. Flinn, “Mössbauer analysis of the valence and coordination of iron cations in SiO2-Na2O-CaO glasses,” Physics and Chemistry of Glasses, vol. 17, pp. 94–103, 1976. View at Google Scholar
  20. Y. F. Xia, R. C. Liu, S. X. Wang, C. Xu, S. Y. Pan, and Y. B. Cheng, “An investigation on coagulation effect of Fe3+ to oxygen ions in glasses,” Acta Physica Sinica—Chinese Edition, vol. 34, pp. 259–262, 1985. View at Google Scholar
  21. K. Hwang and Y. Lim, “Chemical and structural changes of hydroxyapatite films by using a sol-gel method,” Surface and Coatings Technology, vol. 115, no. 2-3, pp. 172–175, 1999. View at Publisher · View at Google Scholar · View at Scopus
  22. Q. H. Yang and Z. A. Jiang, “Study on the kinetics of crystallization of glass,” Journal of the Chinese Ceramic Society, vol. 5, pp. 419–426, 1994. View at Google Scholar