Modeling and Analysis of the Effect of Dip-Spin Coating Process Parameters on Coating Thickness Using Factorial Design Method

<div>Optical micrographs of the cross-sectional area of the sample at different spin speeds: (a) 100 rpm and (b) 500 rpm (viscosity of 1100 mPa⋅s, withdrawal rate of 20 mm/s, and immersion time of 20 s).</div>

Advances in Materials Science and Engineering

fig4

Figure 4

Figure 4: Modeling and Analysis of the Effect of Dip-Spin Coating Process Parameters on Coating Thickness Using Factorial Design Method 