Research Article
Modeling and Analysis of the Effect of Dip-Spin Coating Process Parameters on Coating Thickness Using Factorial Design Method
Table 3
Estimated effect and coefficients for coating thickness (coded units).
| Term | Effect | Coefficient | p value |
| Constant | | 6.0362 | 0.000 | A | 1.6767 | 0.8383 | 0.000 | B | 0.7092 | 0.3546 | 0.000 | C | −0.3858 | −0.1929 | 0.000 | D | 0.6642 | 0.3321 | 0.000 | AB | 0.1767 | 0.0883 | 0.001 | AC | −0.1450 | −0.0725 | 0.007 | AD | 0.2033 | 0.1017 | 0.000 | BC | 0.0308 | 0.0154 | 0.546 | BD | 0.0708 | 0.0354 | 0.170 | CD | −0.0342 | −0.0171 | 0.504 | ABC | 0.0250 | 0.0125 | 0.624 | ABD | 0.0500 | 0.0250 | 0.330 | ACD | −0.0150 | −0.0075 | 0.769 | BCD | 0.1158 | 0.0579 | 0.028 | ABCD | 0.0517 | 0.0258 | 0.314 | Center point | | 0.0050 | 0.550 |
|
|
= 99.76%; Adj. = 96.76%; value of LOF = 0.65; significant at significance level of less than 0.05.
|