Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017, Article ID 9649187, 14 pages
https://doi.org/10.1155/2017/9649187
Research Article

Failure Modes in Concrete Repair Systems due to Ongoing Corrosion

1Delft University of Technology, Delft, Netherlands
2Magnel Laboratory for Concrete Research, Ghent University, Ghent, Belgium

Correspondence should be addressed to Mladena Luković; ln.tfledut@civokul.m

Received 21 September 2016; Accepted 26 February 2017; Published 2 April 2017

Academic Editor: Cristina Leonelli

Copyright © 2017 Mladena Luković et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. L. Bertolini, B. Elsener, P. Pedeferri, E. Redaelli, and R. B. Polder, Corrosion of Steel in Concrete: Prevention, Diagnosis, Repair, John Wiley & Sons, New York, NY, USA, 2013.
  2. M. Raupach, “Chloride-induced macrocell corrosion of steel in concrete—theoretical background and practical consequences,” Construction and Building Materials, vol. 10, no. 5, pp. 329–338, 1996. View at Publisher · View at Google Scholar · View at Scopus
  3. J. A. Gonzalez, S. Algaba, and C. Andrade, “Corrosion: of reinforcing bars in carbonated concrete,” British Corrosion Journal, vol. 15, no. 3, pp. 135–139, 1980. View at Publisher · View at Google Scholar · View at Scopus
  4. C. Alonso, C. Andrade, J. Rodriguez, and J. M. Diez, “Factors controlling cracking of concrete affected by reinforcement corrosion,” Materials and Structures, vol. 31, no. 211, pp. 435–441, 1998. View at Google Scholar · View at Scopus
  5. Y. Liu and R. E. Weyers, “Modeling the time-to-corrosion cracking in chloride contaminated reinforced concrete structures,” ACI Materials Journal, vol. 95, no. 6, pp. 675–681, 1998. View at Google Scholar · View at Scopus
  6. P. R. Vassie, “The influence of steel condition on the effectiveness of repairs to reinforced concrete,” Construction and Building Materials, vol. 3, no. 4, pp. 201–207, 1989. View at Publisher · View at Google Scholar · View at Scopus
  7. A. M. Vaysburd and P. H. Emmons, “How to make today's repairs durable for tomorrow—corrosion protection in concrete repair,” Construction and Building Materials, vol. 14, no. 4, pp. 189–197, 2000. View at Publisher · View at Google Scholar · View at Scopus
  8. C. Christodoulou, C. Goodier, S. Austin, J. Webb, and G. K. Glass, “Diagnosing the cause of incipient anodes in repaired reinforced concrete structures,” Corrosion Science, vol. 69, pp. 123–129, 2013. View at Publisher · View at Google Scholar · View at Scopus
  9. T. Kamada and V. C. Li, “Effects of surface preparation on the fracture behavior of ECC/concrete repair system,” Cement and Concrete Composites, vol. 22, no. 6, pp. 423–431, 2000. View at Publisher · View at Google Scholar · View at Scopus
  10. M. D. Lepech and V. Li, “Long term durability performance of engineered cementitious composites,” Restoration of Buildings and Monuments, vol. 12, no. 2, pp. 119–132, 2006. View at Publisher · View at Google Scholar
  11. K. Kobayashi, T. Iizuka, H. Kurachi, and K. Rokugo, “Corrosion protection performance of high performance fiber reinforced cement composites as a repair material,” Cement and Concrete Composites, vol. 32, no. 6, pp. 411–420, 2010. View at Publisher · View at Google Scholar · View at Scopus
  12. S. J. Pantazopoulou and K. D. Papoulia, “Modeling cover-cracking due to reinforcement corrosion in RC structures,” Journal of Engineering Mechanics, vol. 127, no. 4, pp. 342–351, 2001. View at Publisher · View at Google Scholar · View at Scopus
  13. B. Šavija, M. Luković, J. Pacheco, and E. Schlangen, “Cracking of the concrete cover due to reinforcement corrosion: a two-dimensional lattice model study,” Construction and Building Materials, vol. 44, pp. 626–638, 2013. View at Publisher · View at Google Scholar · View at Scopus
  14. K. Kobayashi, S. C. Paul, and G. P. van Zijl, “Reinforcing bar corrosion,” in A Framework for Durability Design with Strain-Hardening Cement-Based Composites (SHCC), pp. 147–70, Springer, Berlin, Germany, 2017. View at Google Scholar
  15. B. Šavija, M. Luković, S. A. S. Hosseini, J. Pacheco, and E. Schlangen, “Corrosion induced cover cracking studied by X-ray computed tomography, nanoindentation, and energy dispersive X-ray spectrometry (EDS),” Materials and Structures, vol. 48, no. 7, pp. 2043–2062, 2015. View at Publisher · View at Google Scholar · View at Scopus
  16. E. Schlangen and Z. Qian, “3D modeling of fracture in cement-based materials,” Journal of Multiscale Modeling, vol. 1, no. 2, pp. 245–261, 2009. View at Publisher · View at Google Scholar · View at Scopus
  17. E. Schlangen and J. G. M. van Mier, “Experimental and numerical analysis of micromechanisms of fracture of cement-based composites,” Cement and Concrete Composites, vol. 14, no. 2, pp. 105–118, 1992. View at Publisher · View at Google Scholar · View at Scopus
  18. L. Liu, G. Ye, E. Schlangen et al., “Modeling of the internal damage of saturated cement paste due to ice crystallization pressure during freezing,” Cement and Concrete Composites, vol. 33, no. 5, pp. 562–571, 2011. View at Publisher · View at Google Scholar · View at Scopus
  19. B. Šavija, D. Liu, G. Smith, K. R. Hallam, E. Schlangen, and P. E. J. Flewitt, “Experimentally informed multi-scale modelling of mechanical properties of quasi-brittle nuclear graphite,” Engineering Fracture Mechanics, vol. 153, pp. 360–377, 2016. View at Publisher · View at Google Scholar · View at Scopus
  20. M. Luković, H. Dong, B. Šavija, E. Schlangen, G. Ye, and K. van Breugel, “Tailoring strain-hardening cementitious composite repair systems through numerical experimentation,” Cement and Concrete Composites, vol. 53, pp. 200–213, 2014. View at Publisher · View at Google Scholar · View at Scopus
  21. E. N. Landis and J. E. Bolander, “Explicit representation of physical processes in concrete fracture,” Journal of Physics D: Applied Physics, vol. 42, no. 21, Article ID 214002, 2009. View at Publisher · View at Google Scholar · View at Scopus
  22. E. Schlangen, “Crack development in concrete, Part 1: fracture experiments and CT-scan observations,” Key Engineering Materials, vol. 385–387, pp. 69–72, 2008. View at Google Scholar
  23. E. J. Garboczi, “Three-dimensional mathematical analysis of particle shape using X-ray tomography and spherical harmonics: application to aggregates used in concrete,” Cement and Concrete Research, vol. 32, no. 10, pp. 1621–1638, 2002. View at Publisher · View at Google Scholar · View at Scopus
  24. Z. Qian, E. J. Garboczi, G. Ye, and E. Schlangen, “Anm: a geometrical model for the composite structure of mortar and concrete using real-shape particles,” Materials and Structures, vol. 49, no. 1-2, pp. 149–158, 2016. View at Publisher · View at Google Scholar · View at Scopus
  25. S. Caré, Q. T. Nguyen, V. L'Hostis, and Y. Berthaud, “Mechanical properties of the rust layer induced by impressed current method in reinforced mortar,” Cement and Concrete Research, vol. 38, no. 8-9, pp. 1079–1091, 2008. View at Publisher · View at Google Scholar · View at Scopus
  26. Y. Zhao, H. Dai, and W. Jin, “A study of the elastic moduli of corrosion products using nano-indentation techniques,” Corrosion Science, vol. 65, pp. 163–168, 2012. View at Publisher · View at Google Scholar · View at Scopus
  27. H. S. Wong, Y. X. Zhao, A. R. Karimi, N. R. Buenfeld, and W. L. Jin, “On the penetration of corrosion products from reinforcing steel into concrete due to chloride-induced corrosion,” Corrosion Science, vol. 52, no. 7, pp. 2469–2480, 2010. View at Publisher · View at Google Scholar · View at Scopus
  28. M. Lukovic, B. avija, E. Schlangen, G. Ye, and K. van Breugel, “A 3D lattice modelling study of drying shrinkage damage in concrete repair systems,” Materials, vol. 9, no. 7, p. 575, 2016. View at Publisher · View at Google Scholar
  29. A. H. J. M. Vervuurt, Interface fracture in concrete [Ph.D. thesis], Delft University of Technology, Delft, Netherlands, 1997.