Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2018, Article ID 1027640, 6 pages
https://doi.org/10.1155/2018/1027640
Research Article

Corrosion Behavior of Alloy C-276 in Supercritical Water

1College of Energy and Power Engineering, Jiangsu University of Science and Technology, Zhenjiang 212003, China
2College of Aerospace Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China
3School of Materials Science and Engineering, Jiangsu University of Science and Technology, Zhenjiang 212003, China

Correspondence should be addressed to Yanxin Qiao; nc.ca.rmi@oaiqxy

Received 19 June 2017; Revised 17 October 2017; Accepted 26 October 2017; Published 14 January 2018

Academic Editor: Alain Portavoce

Copyright © 2018 Hong Shi et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. G. Wranglen, An Introduction to Corrosion and Protection of Metals, Chapman and Hall, London, UK, 1985.
  2. C. Jones, “Materials review,” SLD Experience, vol. 1, p. 35, 2013. View at Google Scholar
  3. M. G. Fontana and R. W. Staehle, Advances in Corrosion Science and Technology, Plenum Press, New York, NY, USA, 1970.
  4. M. Sun, X. Wu, Z. Zhang, and E.-H. Han, “Analyses of oxide films grown on Alloy 625 in oxidizing supercritical water,” Journal of Supercritical Fluids, vol. 47, no. 2, pp. 309–317, 2008. View at Publisher · View at Google Scholar · View at Scopus
  5. L. U. Jianshu, B. Wang, J. Zhang, and Z. Mao, “The corrosion of stainless steels in supercritical water oxide system for destroying n-amine phenol and sodium dodecyl sulphonate,” Materials Science & Engineering, vol. 22, no. 2, p. 187, 2001. View at Google Scholar
  6. A. Machet, A. Galtayries, S. Zanna et al., “XPS and STM study of the growth and structure of passive films in high temperature water on a nickel-base alloy,” Electrochimica Acta, vol. 49, no. 22-23, pp. 3957–3964, 2004. View at Publisher · View at Google Scholar · View at Scopus
  7. A. Machet, A. Galtayries, P. Marcus, P. Combrade, P. Jolivet, and P. Scott, “XPS study of oxides formed on nickel-base alloys in high-temperature and high-pressure water,” Surface & Interface Analysis, vol. 34, no. 1, pp. 197–200, 2002. View at Publisher · View at Google Scholar · View at Scopus
  8. F. Di Gabriele, F. H. Stott, and Z. Liu, “Effect of experimental conditions on the metal dusting phenomenon in several commercial nickel-base alloys,” Materials & Corrosion, vol. 58, no. 2, pp. 81–86, 2015. View at Publisher · View at Google Scholar · View at Scopus
  9. F. Yang, X. He, L. Zhao, and X. Fang, “Influence of nickel-based alloys’ mechanical properties on mechanochemical effect at crack tip in high temperature water environments,” Rare Metal Materials & Engineering, vol. 45, no. 7, pp. 1641–1646, 2016. View at Publisher · View at Google Scholar
  10. D. Noël, O. D. Bouvier, F. Vaillant, F. Foct, and T. Magnin, “Study of the mechanisms of stress corrosion cracking of alloys 600 and 690 in primary water reactor conditions,” in Proceedings of the Corrosion Deformation Interactions Conference (CDI’96), Nice, France, Sepember 1996.
  11. T. Takumi, T. Nobuo, Y. Takuyo et al., “Influence of dissolved hydrogen on structure of oxide film on alloy 600 formed in primary water of pressurized water reactors,” Journal of Nuclear Science and Technology, vol. 40, no. 7, pp. 509–516, 2003. View at Publisher · View at Google Scholar
  12. N. Otsuka and H. Fujikawa, “Scaling of austenitic stainless steels and nickel-base alloys in high-temperature steam at 973 K,” Corrosion, vol. 47, no. 4, pp. 240–248, 1991. View at Publisher · View at Google Scholar
  13. N. Eliaz, G. Shemesh, and R. M. Latanision, “Hot corrosion in gas turbine components,” Engineering Failure Analysis, vol. 9, no. 1, pp. 31–43, 2002. View at Publisher · View at Google Scholar · View at Scopus
  14. M. F. Montemor, M. G. S. Ferreira, N. E. Hakiki, and M. D. C. Belo, “Chemical composition and electronic structure of the oxide films formed on 316l stainless steel and nickel based alloys in high temperature aqueous environments,” Corrosion Science, vol. 42, no. 9, pp. 1635–1650, 2000. View at Publisher · View at Google Scholar · View at Scopus
  15. Q. Zhang, R. Tang, L. I. Cong, X. Luo, C. Long, and K. Yin, “Corrosion behavior of Ni-base alloys in supercritical water,” Nuclear Engineering & Technology, vol. 41, no. 1, pp. 107–112, 2009. View at Google Scholar
  16. X. Lu, S. Tian, T. Chen, C. Guo, G. Li, and S. L. University, “Internal oxide and internal sulfuration of Ni-base alloy with high Cr content during hot corrosion in molten sulfate,” Rare Metal Materials & Engineering, vol. 43, no. 1, p. 79, 2014. View at Google Scholar
  17. X. He, X. Xue, T. Wei, L. Zhao, and X. Gong, “Analysis on mechanical property of oxide film in stress corrosion cracking tip of nickel-based alloys,” Rare Metal Materials & Engineering, vol. 40, no. 7, pp. 1188–1191, 2011. View at Google Scholar
  18. M. Sun, X. Wu, Z. Zhang, and E. H. Han, “Analyses of oxide films grown on alloy 625 in oxidizing supercritical water,” Journal of Supercritical Fluids, vol. 47, no. 2, pp. 309–317, 2008. View at Publisher · View at Google Scholar · View at Scopus
  19. V. Shankar, K. B. S. Rao, and S. L. Mannan, “Microstructure and mechanical properties of inconel 625 superalloy,” Journal of Nuclear Materials, vol. 288, no. 2-3, pp. 222–232, 2001. View at Publisher · View at Google Scholar · View at Scopus
  20. K. H. Chang, J. H. Huang, C. B. Yan, T. K. Yeh, F. R. Chen, and J. J. Kai, “Corrosion behavior of alloy 625 in supercritical water environments,” Progress in Nuclear Energy, vol. 57, no. 5, pp. 20–31, 2012. View at Publisher · View at Google Scholar · View at Scopus
  21. T. Takada, H. Omura, Y. Akai, N. Hara, N. Saito, and Y. Tsuchiya, “Corrosion performance of metals for supercritical water, oxide-utilized organic waste-processing reactors,” Corrosion, vol. 62, no. 5, pp. 383–394, 2006. View at Publisher · View at Google Scholar
  22. J. Panter, B. Viguier, J. M. Cloué, M. Foucault, P. Combrade, and E. Andrieu, “Influence of oxide films on primary water stress corrosion cracking initiation of alloy 600,” Journal of Nuclear Materials, vol. 348, no. 1-2, pp. 213–221, 2006. View at Publisher · View at Google Scholar · View at Scopus
  23. Q. Zhang, R. Tang, K. Yin, X. Luo, and L. Zhang, “Corrosion behavior of hastelloy C-276 in supercritical water,” Corrosion Science, vol. 51, no. 9, pp. 2092–2097, 2009. View at Publisher · View at Google Scholar · View at Scopus
  24. L. Tiefan, High Temperature Oxide and Hot Corrosion of Metal, Chemical Industry Press, Beijing, China, 2004.
  25. B. Stellwag, “The mechanism of oxide film formation on austenitic stainless steels in high temperature water,” Corrosion Science, vol. 40, no. 2-3, pp. 337–370, 1998. View at Publisher · View at Google Scholar · View at Scopus
  26. W. Kuang, X. Wu, E. H. Han, and J. Rao, “The mechanism of oxide film formation on alloy 690 in oxygenated high temperature water,” Corrosion Science, vol. 53, no. 11, pp. 3853–3860, 2011. View at Publisher · View at Google Scholar · View at Scopus
  27. L. Meishuan, High Temperature Corrosion of Metal, Metallurgical Industry Press, Beijing, China, 2001.
  28. K. J. Yin, S. Y. Qiu, R. Tang, Q. Zhang, and L. Zhang, “Corrosion behavior of steel p92 in supercritical water,” Journal of Supercritical Fluids, vol. 50, no. 3, pp. 235–239, 2010. View at Publisher · View at Google Scholar · View at Scopus
  29. Y. X. Qiao, F. H. Liu, A. Ren, S. L. Jiang, and Y. G. Zheng, “Erosion-corrosion behavior of high nitrogen stainless steel and commercial 321 stainless steel,” Journal of Chinese Society for Corrosion & Protection, vol. 32, no. 2, pp. 141–145, 2012. View at Google Scholar