Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2018, Article ID 1616340, 19 pages
https://doi.org/10.1155/2018/1616340
Research Article

Effect of the Noble Metals Addition on the Oxidation Behavior of Ni3Al

1Facultad de Química, Universidad Nacional Autónoma de Mexico, Edificio B, Cd. Universitaria, 04510 Ciudad de Mexico, Mexico
2CIICAp, Universidad Autónoma del Estado de Morelos, Avenida Universidad 1001, 62209 Cuernavaca, MOR, Mexico
3CIATEQ A.C., Eje 126 No. 225, Zona Industrial, 78395 San Luis Potosí, SLP, Mexico
4Instituto de Investigaciones en Materiales, Universidad Nacional Autónoma de Mexico, Cd. Universitaria, 04510 Ciudad de Mexico, Mexico
5Instituto Nacional de Electricidad y Energías Limpias, Avenida Reforma 113, Colonia Palmira, 62490 Cuernavaca, MOR, Mexico
6Instituto de Ciencias Físicas, Universidad Nacional Autónoma de Mexico, Avenida Universidad s/n, 62210 Cuernavaca, MOR, Mexico
7Corrosion y Protección (CyP), Buffon 46, 11590 Mexico City, Mexico

Correspondence should be addressed to J. Porcayo-Calderon; moc.liamg@coyacropj

Received 6 July 2017; Revised 12 October 2017; Accepted 1 November 2017; Published 17 January 2018

Academic Editor: Amit Bandyopadhyay

Copyright © 2018 J. J. Ramos-Hernandez et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. C. Deevi and V. K. Sikka, “Nickel and iron aluminides: an overview on properties, processing, and applications,” Intermetallics, vol. 4, no. 5, pp. 357–375, 1996. View at Publisher · View at Google Scholar · View at Scopus
  2. A. S. Verin, “Certain features of the structure and anisotropy in Ni3Al single crystals,” Metal Science and Heat Treatment, vol. 36, no. 2, pp. 99–102, 1994. View at Publisher · View at Google Scholar · View at Scopus
  3. A. Chiba and S. Hanada, “Relationship between the APD structure and ductility of rapidly solidified Ni3Al alloys,” Intermetallics, vol. 4, no. 1, pp. 55–59, 1996. View at Publisher · View at Google Scholar · View at Scopus
  4. P. Jozwik, E. Jezierska, and Z. Bojar, “TEM investigations of Ni3Al-based intermetallic polycrystals,” Materials Chemistry and Physics, vol. 81, no. 2-3, pp. 448–451, 2003. View at Publisher · View at Google Scholar · View at Scopus
  5. O. Hunziker and W. Kurz, “Solidification microstructure maps in Ni-Al alloys,” Acta Materialia, vol. 45, no. 12, pp. 4981–4992, 1997. View at Publisher · View at Google Scholar
  6. T. Mawari and T. Hirano, “Effects of unidirectional solidification conditions on the microstructure and tensile properties of Ni3Al,” Intermetallics, vol. 3, no. 1, pp. 23–33, 1995. View at Publisher · View at Google Scholar · View at Scopus
  7. A. Inoue, H. Tomioka, and T. Masumoto, “An improvement of ductility and strength of the L12 compounds in Ni-Al-X (X = Cr, Mn, Fe, Co or Si) systems by melt quenching,” Journal of Materials Science Letters, vol. 1, no. 9, pp. 377–380, 1982. View at Publisher · View at Google Scholar · View at Scopus
  8. R. Goetzinger, M. Barth, D. M. Herlach, O. Hunziker, and W. Kurz, “Disorder trapping in Ni3(Al, Ti) by solidification from the undercooled melt,” Materials Science and Engineering: A, vol. 226–228, pp. 415–419, 1997. View at Publisher · View at Google Scholar
  9. J. Sun, C. S. Lee, and J. K. L. Lai, “Deformation microstructure of Ni3Al intermetallic compound macroalloyed with Pd,” Materials Letters, vol. 31, no. 1-2, pp. 1–4, 1997. View at Publisher · View at Google Scholar
  10. B. A. Pint, S. A. Speakman, C. J. Rawn, and Y. Zhang, “Deformation and phase transformations during the cyclic oxidation of Ni-Al and Ni-Pt-Al,” The Journal of the Minerals, Metals & Materials Society, vol. 58, no. 1, pp. 47–52, 2006. View at Publisher · View at Google Scholar · View at Scopus
  11. D. Lee, M. L. Santella, I. M. Anderson, and G. M. Pharr, “Thermal aging effects on the microstructure and short-term oxidation behavior of a cast Ni3Al alloy,” Intermetallics, vol. 13, no. 2, pp. 187–196, 2005. View at Publisher · View at Google Scholar · View at Scopus
  12. M. Haerig and S. Hofmann, “Mechanisms of Ni3Al oxidation between 500°C and 700°C,” Applied Surface Science, vol. 125, no. 1, pp. 99–114, 1998. View at Publisher · View at Google Scholar
  13. U. Bardi, A. Atrei, and G. Rovida, “Initial stages of oxidation of the Ni3Al alloy: a study by X-ray photoelectron spectroscopy and low energy He+ scattering,” Surface Science, vol. 239, no. 1-2, pp. L511–L516, 1990. View at Publisher · View at Google Scholar · View at Scopus
  14. C. Mei, S. Patu, S. Changxu, and S. Jianian, “Effects of B+ and Cr+ ion implantation on the oxidation of Ni3Al,” Journal of Materials Science, vol. 28, no. 20, pp. 5508–5513, 1993. View at Publisher · View at Google Scholar · View at Scopus
  15. A. Velon and I. Olefjord, “Oxidation behavior of Ni3Al and Fe3Al: II. Early stage of oxide growth,” Oxidation of Metals, vol. 56, no. 5-6, pp. 425–452, 2001. View at Publisher · View at Google Scholar
  16. T. Norby and P. Kofstad, “Electronic, ionic, and protonic conductivities of a commercial, polycrystalline α-Al2O3,” High Temperatures-High Pressures, vol. 20, pp. 345–360, 1988. View at Google Scholar
  17. D. B. Lee and M. L. Santella, “High temperature oxidation of Ni3Al alloy containing Cr, Zr, Mo, and B,” Materials Science and Engineering: A, vol. 374, no. 1-2, pp. 217–223, 2004. View at Publisher · View at Google Scholar · View at Scopus
  18. S. G. Addepalli, B. Ekstrom, N. P. Magtoto, J. Lin, and J. A. Kelber, “STM atomic-scale characterization of the γ-Al2O3 film on Ni3Al(111),” Surface Science, vol. 442, no. 3, pp. 385–389, 1999. View at Publisher · View at Google Scholar
  19. A. M. Venezia and C. M. Loxton, “Low pressure oxidation of Ni3Al alloys at elevated temperatures as studied by X-ray photoelectron spectroscopy and Auger spectroscopy,” Surface Science, vol. 194, no. 1-2, pp. 136–148, 1988. View at Publisher · View at Google Scholar · View at Scopus
  20. A. M. Venezia, C. M. Loxton, and J. A. Horton, “Temperature and pressure effects for oxygen adsorption and oxidation of Ni3Al alloyed with chromium and zirconium,” Surface Science, vol. 225, no. 1-2, pp. 195–205, 1990. View at Google Scholar
  21. U. Bardi, A. Atrei, and G. Rovida, “Initial stages of oxidation of the Ni3Al alloy: structure and composition of the aluminum oxide overlayer studied by XPS, LEIS and LEED,” Surface Science, vol. 268, no. 1–3, pp. 87–97, 1992. View at Publisher · View at Google Scholar · View at Scopus
  22. P. Pérez, J. L. González-Carrasco, P. Adeva, V. A. C. Haanappel, and M. F. Stroosnijder, “Effect of Cr- and Y-implantation on oxidation behaviour of powder metallurgical Ni3Al,” Materials Science and Technology, vol. 15, no. 3, pp. 345–351, 1999. View at Publisher · View at Google Scholar
  23. M. Garza, N. P. Magtoto, and J. A. Kelber, “Characterization of oxidized Ni3Al(110) and interaction of the oxide film with water vapor,” Surface Science, vol. 519, no. 3, pp. 259–268, 2002. View at Publisher · View at Google Scholar · View at Scopus
  24. V. A. C. Haanappel, P. Pérez, J. L. González-Carrasco, and M. F. Stroosnijder, “The cyclic oxidation behaviour of PM Ni3Al in air at elevated temperatures: the effect of Cr- and Y-implantation,” Intermetallics, vol. 6, no. 5, pp. 347–356, 1998. View at Publisher · View at Google Scholar
  25. T. T. Chang, Y. C. Pan, and T. H. Chuang, “The oxidation behavior of Ni3Al-Zr alloys with various zirconium contents,” Journal of Alloys and Compounds, vol. 243, no. 1-2, pp. 126–132, 1996. View at Publisher · View at Google Scholar
  26. D. B. Lee and D. J. Kim, “The oxidation of Ni3Al containing decomposed SiC-particles,” Intermetallics, vol. 9, no. 1, pp. 51–56, 2001. View at Publisher · View at Google Scholar · View at Scopus
  27. W. W. Lee, D. B. Lee, M. H. Kim, and S. C. Ur, “High temperature oxidation of an oxide-dispersion strengthened NiAl,” Intermetallics, vol. 7, no. 12, pp. 1361–1366, 1999. View at Publisher · View at Google Scholar · View at Scopus
  28. A. Velon and D. Q. Yi, “Influence of Cr on the Oxidation of Fe3Al and Ni3Al at 500°C,” Oxidation of Metals, vol. 57, pp. 13–31, 2002. View at Google Scholar
  29. V. Deodeshmukh, N. Mu, B. Li, and B. Gleeson, “Hot corrosion and oxidation behavior of a novel Pt+ Hf-modified γ-Ni3Al+γ-Ni-based coating,” Surface and Coatings Technology, vol. 201, no. 1, pp. 3836–3840, 2006. View at Publisher · View at Google Scholar · View at Scopus
  30. F. Qin, J. W. Anderegg, C. J. Jenks, B. Gleeson, D. J. Sordelet, and P. A. Thiel, “The effect of Pt on Ni3Al surface oxidation at low-pressures,” Surface Science, vol. 601, no. 1, pp. 146–154, 2007. View at Publisher · View at Google Scholar · View at Scopus
  31. S. J. Hong, G. H. Hwang, W. K. Han, and S. G. Kang, “Cyclic oxidation of Pt/Pd-modified aluminide coating on a nickel-based superalloy at 1150°C,” Intermetallics, vol. 17, no. 6, pp. 381–386, 2009. View at Publisher · View at Google Scholar · View at Scopus
  32. B. Gleeson, N. Mu, and S. Hayashi, “Compositional factors affecting the establishment and maintenance of Al2O3 scales on Ni-Al-Pt systems,” Journal of Materials Science, vol. 44, no. 7, pp. 1704–1710, 2009. View at Publisher · View at Google Scholar · View at Scopus
  33. A. V. Ruban and H. L. Skriver, “Calculated site substitution in ternary γ-Ni3Al: temperature and composition effects,” Physical Review B, vol. 55, no. 2, pp. 856–874, 1997. View at Publisher · View at Google Scholar
  34. C. Wolverton and D. De Fontaine, “Site substitution of ternary additions to Ni3Al (γ) from electronic-structure calculations,” Physical Review B, vol. 49, no. 17, pp. 12351–12354, 1994. View at Publisher · View at Google Scholar · View at Scopus
  35. C. Y. Geng, C. Y. Wang, and T. Yu, “Site preference and alloying effect of platinum group metals in γ-Ni3Al,” Acta Materialia, vol. 52, no. 18, pp. 5427–5433, 2004. View at Publisher · View at Google Scholar · View at Scopus
  36. C. Jiang and B. Gleeson, “Site preference of transition metal elements in Ni3Al,” Scripta Materialia, vol. 55, no. 5, pp. 433–436, 2006. View at Publisher · View at Google Scholar · View at Scopus
  37. C. Jiang, D. J. Sordelet, and B. Gleeson, “Site preference of ternary alloying elements in Ni3Al: a first-principles study,” Acta Materialia, vol. 54, no. 4, pp. 1147–1154, 2006. View at Publisher · View at Google Scholar · View at Scopus
  38. B. Bhattacharya and R. K. Ray, “Deformation behavior of a Ni3Al (B, Zr) alloy during cold rolling: part I. Changes in order and structure,” Metallurgical and Materials Transactions A, vol. 31, no. 12, pp. 3001–3010, 2000. View at Publisher · View at Google Scholar
  39. Y. Xu, S. Kameoka, K. Kishida, M. Demura, A. P. Tsai, and T. Hirano, “Catalytic properties of Ni3Al intermetallics for methanol decomposition,” Materials Transactions, vol. 45, no. 11, pp. 3177–3179, 2004. View at Publisher · View at Google Scholar
  40. L. Lu, M. O. Lai, and S. Zhang, “Evolution and characterization of a Ni3Al intermetallic compound during mechanical alloying,” Materials & Design, vol. 15, no. 2, pp. 79–86, 1994. View at Publisher · View at Google Scholar · View at Scopus
  41. T. Hirano, “Improvement of room temperature ductility of stoichiometric Ni3Al by unidirectional solidification,” Acta metallurgica et materialia, vol. 38, no. 12, pp. 2667–2671, 1990. View at Publisher · View at Google Scholar · View at Scopus
  42. B. D. Cullity and S. R. Stock, Elements of X-ray Diffraction, Prentice Hall, Upper Saddle River, NJ, USA, 2014, Pearson New Iinternational Edition.
  43. R. Seymour, A. Hemeryck, K. I. Nomura et al., “Nanoindentation of NiAl and Ni3Al crystals on (100), (110), and (111) surfaces: a molecular dynamics study,” Applied Physics Letters, vol. 104, no. 14, p. 141904, 2014. View at Publisher · View at Google Scholar · View at Scopus
  44. G. F. Cotterill, H. Niehus, and D. J. O’Connor, “An STM study of the initial stages of oxidation of Ni3Al (110),” Surface Review and Letters, vol. 3, no. 3, pp. 1355–1363, 1996. View at Publisher · View at Google Scholar
  45. Y. G. Shen, D. J. O'Connor, and R. J. MacDonald, “Studies of surface composition, structure and oxygen adsorption of Ni3Al (110) by Li+ and He+ ion scattering,” Surface and Interface Analysis, vol. 18, no. 10, pp. 729–739, 1992. View at Publisher · View at Google Scholar · View at Scopus
  46. A. Rosenhahn, J. Schneider, C. Becker, and K. Wandelt, “Oxidation of Ni3Al (111) at 600, 800, and 1050 K investigated by scanning tunneling microscopy,” Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, vol. 18, no. 4, pp. 1923–1927, 2000. View at Publisher · View at Google Scholar · View at Scopus
  47. S. Degen, A. Krupski, M. Kralj et al., “Determination of the coincidence lattice of an ultra thin Al2O3 film on Ni3Al (111),” Surface science, vol. 576, no. 1–3, pp. L57–L64, 2005. View at Publisher · View at Google Scholar · View at Scopus
  48. A. Rosenhahn, J. Schneider, C. Becker, and K. Wandelt, “The formation of Al2O3-layers on Ni3Al (111),” Applied Surface Science, vol. 142, no. 1–4, pp. 169–173, 1999. View at Publisher · View at Google Scholar · View at Scopus
  49. S. P. Chen, A. F. Voter, and D. J. Srolovitz, “Oscillatory surface relaxations in Ni, Al, and their ordered alloys,” Physical Review Letters, vol. 57, no. 11, pp. 1308–1311, 1986. View at Publisher · View at Google Scholar · View at Scopus
  50. W. J. Chia and Y. W Chung, “Surface spectroscopy and temperature-programmed desorption studies of the interaction of water vapor with Ni3(Al, Ti) (100) and (111) surfaces as a function of temperature,” Intermetallics, vol. 3, no. 6, pp. 505–509, 1995. View at Publisher · View at Google Scholar · View at Scopus
  51. O. Hunziker and W. Kurz, “Directional solidification and phase equilibria in the Ni-Al system,” Metallurgical and Materials Transactions A, vol. 30, no. 12, pp. 3167–3175, 1999. View at Publisher · View at Google Scholar
  52. G. Rosas, R. Esparza, A. Bedolla, O. Flores, and R. Perez, “Effect of Li alloying on the microstructure and mechanical properties of Ni3Al,” Advances in Technology of Materials and Materials Processing Journal, vol. 9, pp. 99–102, 2007. View at Google Scholar
  53. M. H. Jacobs, TALAT Lecture 1203: Phase Diagrams, European Aluminium Association, Bruxelles, Belgium, 2010.
  54. E. J. Lavernia and T. S. Srivatsan, “The rapid solidification processing of materials: science, principles, technology, advances, and applications,” Journal of Materials Science, vol. 45, no. 2, pp. 287–325, 2010. View at Publisher · View at Google Scholar · View at Scopus
  55. Z. Jingchen and Y. Ping, The Effect of Cooling Rate of Solidification on Microstructure and Alloy Element Segregation of as Cast Alloy 718, Central Iron and Steel Research Institute, Beijing, China, 2015.
  56. J. Xu, U. Herr, T. Klassen, and R. S. Averback, “Formation of supersaturated solid solutions in the immiscible Ni-Ag system by mechanical alloying,” Journal of Applied Physics, vol. 79, no. 8, pp. 3935–3945, 1996. View at Publisher · View at Google Scholar
  57. J. Zhou and J. T. Guo, “Effect of Ag alloying on the microstructure of NiAl,” Materials Letters, vol. 56, no. 3, pp. 178–182, 2002. View at Publisher · View at Google Scholar · View at Scopus
  58. J. Zhou and J. T. Guo, “Effect of Ag alloying on microstructure, mechanical and electrical properties of NiAl intermetallic compound,” Materials Science and Engineering: A, vol. 339, no. 1-2, pp. 166–174, 2003. View at Publisher · View at Google Scholar · View at Scopus
  59. L. Sheng, W. Zhang, J. Guo, F. Yang, Y. Liang, and H. Ye, “Effect of Au addition on the microstructure and mechanical properties of NiAl intermetallic compound,” Intermetallics, vol. 18, no. 4, pp. 740–744, 2010. View at Publisher · View at Google Scholar · View at Scopus
  60. C. Meng, J. Guo, and Z. Hu, “Mechanism of macroalloying-induced ductility in Ni3Al,” Journal of Materials Science & Technology, vol. 10, pp. 279–284, 1994. View at Google Scholar
  61. M. J. Li, X. F. Sun, H. R. Guan, X. X. Jiang, and Z. Q. Hu, “The degradation of (Ni,Pd)Al coatings on superalloy IN738 during isothermal oxidation,” Surface and Coatings Technology, vol. 185, no. 2-3, pp. 172–177, 2004. View at Publisher · View at Google Scholar · View at Scopus
  62. M. J. Li, X. F. Sun, H. R. Guan, X. X. Jiang, and Z. Q. Hu, “Cyclic oxidation behavior of palladium-modified aluminide coating,” Surface and Coatings Technology, vol. 167, no. 1, pp. 106–111, 2003. View at Publisher · View at Google Scholar · View at Scopus
  63. D. Oquab and D. Monceau, “In-situ SEM study of cavity growth during high temperature oxidation of β-(Ni,Pd)Al,” Scripta Materialia, vol. 44, no. 12, pp. 2741–2746, 2001. View at Publisher · View at Google Scholar · View at Scopus
  64. Y. Zhang, J. A. Haynes, W. Y. Lee et al., “Effects of Pt incorporation on the isothermal oxidation behavior of chemical vapor deposition aluminide coatings,” Metallurgical and Materials Transactions A, vol. 32, no. 7, pp. 1727–1741, 2001. View at Publisher · View at Google Scholar
  65. P. Peréz, M. Eddahbi, J. L. González-Carrasco, and P. Adeva, “Effect of the processing route on the oxidation behaviour of a Ni3Al powder metallurgy alloy,” Intermetallics, vol. 7, no. 6, pp. 679–687, 1999. View at Publisher · View at Google Scholar · View at Scopus
  66. J. J. Ramos-Hernandez, J. Porcayo-Calderon, V. M. Salinas-Bravo, C. D. Arrieta-Gonzalez, J. G. Gonzalez-Rodriguez, and L. Martinez-Gomez, “Phase stability diagrams for high temperature corrosion processes,” Mathematical Problems in Engineering, vol. 2013, pp. 1–7, 2013. View at Publisher · View at Google Scholar · View at Scopus
  67. A. Atkinson, R. I. Taylor, and A. E. Hughes, “A quantitative demonstration of the grain boundary diffusion mechanism for the oxidation of metals,” Philosophical Magazine A, vol. 45, no. 5, pp. 823–833, 1982. View at Google Scholar
  68. D. Naumenko, B. Gleeson, E. Wessel, L. Singheiser, and W. J. Quadakkers, “Correlation between the microstructure, growth mechanism, and growth kinetics of alumina scales on a FeCrAlY alloy,” Metallurgical and Materials Transactions A, vol. 38, no. 12, pp. 2974–2983, 2007. View at Publisher · View at Google Scholar · View at Scopus
  69. W. J. Quadakkers, D. Naumenko, E. Wessel, V. Kochubey, and L. Singheiser, “Growth rates of alumina scales on Fe–Cr–Al alloys,” Oxidation of Metals, vol. 61, no. 1-2, pp. 17–37, 2004. View at Publisher · View at Google Scholar
  70. Y. Cadoret, D. Monceau, M. Bacos, P. Josso, V. Maurice, and P. Marcus, “Effect of platinum on the growth rate of the oxide scale formed on cast nickel aluminide intermetallic alloys,” Oxidation of Metals, vol. 64, no. 3-4, pp. 185–205, 2005. View at Publisher · View at Google Scholar · View at Scopus
  71. S. Hayashi and B. Gleeson, “Early-stage oxidation behavior of Pt-modified γ-Ni3Al-based alloys with and without Hf addition,” Oxidation of Metals, vol. 71, no. 1-2, pp. 5–19, 2009. View at Publisher · View at Google Scholar · View at Scopus
  72. M. W. Brumm and H. J Grabke, “The oxidation behaviour of NiAl-I. Phase transformations in the alumina scale during oxidation of NiAl and NiAl-Cr alloys,” Corrosion Science, vol. 33, no. 11, pp. 1677–1690, 1992. View at Publisher · View at Google Scholar · View at Scopus
  73. S. C. Choi, H. J. Cho, Y. J. Kim, and D. B. Lee, “High-temperature oxidation behavior of pure Ni3Al,” Oxidation of Metals, vol. 46, no. 1-2, pp. 51–72, 1996. View at Publisher · View at Google Scholar
  74. J. D. Kuenzly and D. L. Douglass, “The oxidation mechanism of Ni3Al containing Yttrium,” Oxidation of Metals, vol. 8, no. 3, pp. 139–178, 1974. View at Publisher · View at Google Scholar · View at Scopus
  75. S. Ochiai, T. Suzuki, Y. Kojima, M. Kobayashi, and Y. Torisaka, “Effect of yttrium addition on the high-temperature oxidation resistance of Ni3Al alloy,” Journal of the Japan Institute of Metals and Materials, vol. 53, no. 6, pp. 585–592, 1989. View at Publisher · View at Google Scholar
  76. N. Birks, G. H. Meier, and F. S. Pettit, “High-temperature corrosion resistance,” Journal of the Minerals, Metals & Materials Society, vol. 39, no. 12, pp. 28–31, 1987. View at Publisher · View at Google Scholar · View at Scopus
  77. G. Cao, L. Geng, Z. Zheng, and M. Naka, “The oxidation of nanocrystalline Ni3Al fabricated by mechanical alloying and spark plasma sintering,” Intermetallics, vol. 15, no. 12, pp. 1672–1677, 2007. View at Google Scholar
  78. N. Mu, T. Izumi, L. Zhang, and B. Gleeson, “The development and performance of novel Pt+Hf-modified γ-Ni3Al+γ-Ni bond coatings for advanced thermal barrier coatings systems,” in Superalloys 2008, R. C. Reed, K. A. Green, P. Caron et al., Eds., TMS (The Minerals, Metals & Materials Society), 2008. View at Google Scholar
  79. C. Jiang and B. Gleeson, “Surface segregation of Pt in γ-Ni3Al: a first-principles study,” Acta Materialia, vol. 55, no. 5, pp. 1641–1647, 2007. View at Publisher · View at Google Scholar · View at Scopus
  80. Y. Niu, X. J. Zhang, Y. Wu, and F. Gesmundo, “The third-element effect in the oxidation of Ni–xCr–7Al (x=0, 5, 10, 15at.%) alloys in 1atm O2 at 900–1000°C,” Corrosion Science, vol. 48, no. 12, pp. 4020–4036, 2006. View at Publisher · View at Google Scholar · View at Scopus
  81. J. Porcayo-Calderon, O. Sotelo-Mazon, V. M. Salinas-Bravo, C. D. Arrieta-Gonzalez, J. J. Ramos-Hernandez, and C. Cuevas-Arteaga, “Electrochemical performance of Ni20Cr coatings applied by combustion powder spray in ZnCl2-KCl molten salts,” International Journal of Electrochemical Science, vol. 7, pp. 1134–1148, 2012. View at Google Scholar
  82. A. Luna-Ramirez, J. Porcayo-Calderon, G. Salinas-Solano, C. D. Arrieta-Gonzalez, V. M. Salinas-Bravo, and L. Martinez, “Electrochemical performance of Fe-Al intermetallic alloys with addition of Li, Ni and Ce in NaVO3 at 700°C,” International Journal of Electrochemical Science, vol. 8, pp. 4641–4653, 2013. View at Google Scholar
  83. J. Porcayo-Calderon, O. Sotelo-Mazon, M. Casales-Diaz, J. A. Ascencio-Gutierrez, V. M. Salinas-Bravo, and L. Martinez-Gomez, “Electrochemical study of Ni20Cr coatings applied by HVOF process in ZnCl2-KCl at high temperatures,” Journal of Analytical Methods in Chemistry, vol. 2014, pp. 1–11, 2014. View at Publisher · View at Google Scholar · View at Scopus
  84. G. Salinas-Solano, J. Porcayo-Calderon, J. G. Gonzalez-Rodriguez, V. M. Salinas-Bravo, J. A. Ascencio-Gutierrez, and L. Martinez-Gomez, “High temperature corrosion of inconel 600 in NaCl-KCl molten salts,” Advances in Materials Science and Engineering, vol. 2014, pp. 1–9, 2014. View at Publisher · View at Google Scholar · View at Scopus
  85. O. Sotelo-Mazon, J. Porcayo-Calderon, C. Cuevas-Arteaga et al., “Corrosion performance of Ni-based alloys in sodium metavanadate,” International Journal of Electrochemical Science, vol. 11, pp. 1868–1882, 2016. View at Google Scholar
  86. J. Doychak, J. L. Smialek, and C. A. Barrett, “The oxidation of Ni-rich Ni-Al intermetallics,” in Oxidation of High Tempereture Intermetallics, T. Grobstein and J. Doychak, Eds., p. 41, Minerals, Metals & Material Society, 1988. View at Google Scholar
  87. K. Zhao, Y. B. Zhou, Y. H. Ma, L. H. Lou, and Z. Q. Hu, “Effect of microstructure on the oxidation behavior of two nickel-based superalloys,” Corrosion, vol. 61, no. 10, pp. 961–967, 2005. View at Publisher · View at Google Scholar
  88. G. Liu, M. Li, M. Zhu, and Y. Zhou, “Transient of alumina oxide scale on β-NiAl coated on M38G alloy at 950°C,” Intermetallics, vol. 15, no. 10, pp. 1285–1290, 2007. View at Publisher · View at Google Scholar · View at Scopus