Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2018, Article ID 1967936, 10 pages
https://doi.org/10.1155/2018/1967936
Research Article

Feasibility of Reduced Lap-Spliced Length in Polyethylene Fiber-Reinforced Strain-Hardening Cementitious Composite

1Department of Architectural Engineering, Gachon University, Seongnam-si, Gyeonggi-do, Republic of Korea
2Department of Architectural Engineering, Chungnam National University, Daejeon, Republic of Korea

Correspondence should be addressed to Hyun-Do Yun; rk.ca.unc@daoresiw

Received 26 July 2017; Revised 16 November 2017; Accepted 4 December 2017; Published 29 January 2018

Academic Editor: Doo‐Yeol Yoo

Copyright © 2018 Wonchang Choi et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. Zuo and D. Darwin, “Splice strength of conventional and high relative rib area bars and high strength concrete,” ACI Structural Journal, vol. 97, no. 4, pp. 630–641, 2000. View at Publisher · View at Google Scholar
  2. S. Yazici, G. Inan, and V. Tabak, “Effect of aspect ratio and volume fraction of steel fiber on the mechanical properties of SFRC,” Construction and Building Materials, vol. 21, no. 6, pp. 1250–1253, 2007. View at Publisher · View at Google Scholar · View at Scopus
  3. B. S. Hamad, M. H. Harajli, and G. Jumaa, “Effect of fiber reinforcement on bond strength of tension lap splices in high-strength concrete,” ACI Structural Journal, vol. 98, no. 5, pp. 638–647, 2001. View at Publisher · View at Google Scholar
  4. L. Yerex, T. H. Wenzel, and R. Davies, “Bond strength of mild steel in polypropylene fiber reinforced concrete,” ACI Journal Proceedings, vol. 82, no. 1, pp. 40–45, 1985. View at Publisher · View at Google Scholar
  5. M. H. Harajli, B. S. Hamad, and A. A. Rteil, “Effect of confinement on bond strength between steel bars and concrete,” ACI Structural Journal, vol. 101, no. 5, pp. 595–603, 2004. View at Publisher · View at Google Scholar
  6. N. Ganesan, P. V. Indira, and M. V. Sabeena, “Bond stress slip response of bars embedded in hybrid fibre reinforced high performance concrete,” Construction and Building Materials, vol. 50, no. 15, pp. 108–115, 2014. View at Publisher · View at Google Scholar · View at Scopus
  7. S. Yazici and H. S. Arel, “The effect of steel fiber on the bond between concrete and deformed steel bars in SFRCs,” Construction and Building Materials, vol. 40, pp. 299–305, 2013. View at Publisher · View at Google Scholar · View at Scopus
  8. S. J. A. Hosseini, A. B. A. Rahman, M. H. Osman, A. Saim, and A. Adnan, “Bond behavior of spirally confined splice of deformed bars in grout,” Construction and Building Materials, vol. 80, pp. 180–194, 2015. View at Publisher · View at Google Scholar · View at Scopus
  9. D. Darwin and E. K. Graham, “Effect of deformation height and spacing on bond strength of reinforcing bars,” ACI Structural Journal, vol. 90, no. 6, pp. 646–657, 1993. View at Publisher · View at Google Scholar
  10. B. S. Hamad and M. S. Itani, “Bond strength of reinforcement in high-performance concrete: the role of silica fume, casting position and super plasticizer dosage,” ACI Materials Journal, vol. 95, no. 5, pp. 499–511, 1998. View at Publisher · View at Google Scholar
  11. A. El-Azab, H. M. Mohamed, and A. Farahat, “Effect of tension lap splice on the behavior of high strength self-compaced beams,” Alexandria Engineering Journal, vol. 53, no. 2, pp. 319–328, 2014. View at Publisher · View at Google Scholar · View at Scopus
  12. R. H. Haddad, R. J. Al-Saleh, and N. M. Al-Akhras, “Effect of elevated temperature on bond between steel reinforcement and fiber reinforced concrete,” Fire Safety Journal, vol. 4, no. 5, pp. 334–343, 2008. View at Publisher · View at Google Scholar · View at Scopus
  13. G. Fischer and V. C. Li, “Influence of matrix ductility on tension-stiffening behavior of steel reinforced engineered cementitious composites (ECC),” ACI Structural Journal, vol. 99, no. 1, pp. 104–111, 2002. View at Publisher · View at Google Scholar
  14. V. C. Li, S. Wang, and C. Wu, “Tensile strain-hardening behavior of polyvinyl alcohol engineered cementitious composites (PVAECC),” ACI Materials Journal, vol. 98, no. 6, pp. 483–492, 2001. View at Publisher · View at Google Scholar
  15. W. C. Choi and H. D. Yun, “Effect of expansive admixtures on the shrinkage and mechanical properties of high-performance fiber-reinforced cement composites,” Scientific World Journal, vol. 2013, Article ID 418734, 11 pages, 2013. View at Publisher · View at Google Scholar · View at Scopus
  16. A. Azizinamini, R. Pavel, E. Hatfield, and S. K. Ghosh, “Behavior of lap-spliced reinforcing bars embedded in high-strength concrete,” ACI Structural Journal, vol. 96, no. 5, pp. 826–835, 1999. View at Publisher · View at Google Scholar
  17. G. Kaklauskas, V. Gribniak, D. Bacinskas, and P. Vainiunas, “Shrinkage influence on tension stiffening in concrete members,” Engineering Structures, vol. 31, no. 6, pp. 1305–1312, 2009. View at Publisher · View at Google Scholar · View at Scopus
  18. M. H. Harajli and K. A. Salloukh, “Effect of fibers on development/splice strength of reinforcing bars in tension,” ACI Structural Journal, vol. 94, no. 4, pp. 317–324, 1997. View at Publisher · View at Google Scholar
  19. B. S. Hamad and J. A. Mike, “Experimental investigation of bond strength of hot-dip galvanized reinforcement in normal- and high-strength concrete,” ACI Structural Journal, vol. 100, no. 4, pp. 465–470, 2003. View at Publisher · View at Google Scholar