Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2018, Article ID 2134873, 14 pages
https://doi.org/10.1155/2018/2134873
Research Article

Mechanical Properties and Durability of Latex-Modified Fiber-Reinforced Concrete: A Tunnel Liner Application

1Department of Civil Engineering, University of Suwon, Hwaseong 18323, Republic of Korea
2Research Center, Contecheng Co., Ltd., Seongnam 13636, Republic of Korea
3Rural Research Institute, Korea Rural Community Corporation, Ansan 15634, Republic of Korea
4Department of Rural Construction Engineering, Kongju National University, Yesan 32439, Republic of Korea

Correspondence should be addressed to Chan-Gi Park; rk.ca.ujgnok@krapgc

Received 22 August 2017; Revised 8 November 2017; Accepted 14 November 2017; Published 21 January 2018

Academic Editor: Young Hoon Kim

Copyright © 2018 Joo-Ha Lee et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. J. You and C. S. You, “A study on the member forces of segmental linings considering key segments,” Journal of Korean Tunnelling and Underground Space Association, vol. 17, no. 3, pp. 363–382, 2015. View at Publisher · View at Google Scholar
  2. S. H. Chang, G. P. Lee, S. W. Choi, and G. J. Bae, “State of the art of segment lining in shield tunnel and statistical analysis of its key design parameters,” Journal of the Korean Society for Rock Mechanics, vol. 21, pp. 427–438, 2011. View at Google Scholar
  3. W. G. Lee, H. I. Kim, B. C. Jung, J. I. Kim, and H. Woo, “A construction plan of double shield TBM in steep tunnel and fault zone,” Korean Tunelling and Underground Space Association, vol. 21, pp. 427–438, 2008. View at Google Scholar
  4. C. S. You and H. M. A. Jeon, “Comparative study on methods for shield tunnel segment lining sectional forces,” Korean Tunelling and Underground Space Association, vol. 14, pp. 159–181, 2012. View at Google Scholar
  5. G. Tiberti, G. A. Plizzari, J. C. Walraven, and C. B. M. Blom, Concrete Tunnel Segments with Combined Traditional and Fiber Reinforcement, ISBN 978-0-415-47535-8, Taylor & Francis Group, London, UK, 2008.
  6. S. Abbas, Structural and Durability Performance of Precast Segmental Tunnel Linings, University of Western Ontario, London, ON, Canada, 2014.
  7. J. P. Won, C. G. Park, Y. J. Kim, and K. H. Park, “Bond properties of synthetic and steel single fiber in high strength cement based composites,” Journal of the Korean Society for Civil Engineers, vol. 27, pp. 609–616, 2007. View at Google Scholar
  8. J. P. Won, C. G. Park, Y. J. Kim, and C. W. Lee, “Pullout behavior of polyolefin synthetic fibers with hydrophilic surface treatment in cement matrix,” Journal of the Korean Society for Civil Engineers, vol. 27, pp. 453–460, 2007. View at Google Scholar
  9. N. Banthia, P. Gupta, C. Yan, and D. R. Morgan, “How tough is fiber reinforced shotcrete? Part 1. Beam tests,” Concrete International, vol. 21, pp. 59–62, 1999. View at Google Scholar
  10. N. Banthia, P. Gupta, C. Yan, and D. R. Morgan, “How tough is fiber reinforced shotcrete? Part 2. Plate tests,” Concrete International, vol. 21, pp. 62–69, 1999. View at Google Scholar
  11. R. Chris, M. Kyran, and J. S. Pei, Fiber-Reinforced Concrete and Bridge Deck Cracking, University of Oklahoma Graduate College, Norman, OK, USA, 2006.
  12. J. H. Lee and C. G. Park, “Effect of natural jute fiber on bond between polyolefin based macro fiber and cement matrix,” Journal of the Korean Society for Civil Engineers, vol. 31, pp. 251–260, 2011. View at Google Scholar
  13. H. B. Wagner and D. G. Grenley, “Interphase effects in polymer-modified hydraulic cements,” Journal of Applied Polymer Science, vol. 22, no. 3, pp. 813–822, 1978. View at Publisher · View at Google Scholar · View at Scopus
  14. Y. Ohama, “Study on properties and mix proportioning of polymer-modified mortars for buildings,” in Report of the Building Research Institute, p. 65, Building Research Institute, Tokyo, Japan, 1973. View at Google Scholar
  15. H. W. Song, S. J. Kwon, S. W. Lee, and K. J. Byun, “A study on resistance of chloride ion penetration in ground granulated blast-furnace slag concrete,” Journal of the Korea Concrete Institute, vol. 15, pp. 400–408, 2003. View at Publisher · View at Google Scholar
  16. D. Hester, C. Mcnally, and M. G. Richardson, “Study of influence of slag alkali level on the alkali-silica reactivity of slag concrete,” Construction and Building Materials, vol. 19, no. 9, pp. 661–665, 2005. View at Publisher · View at Google Scholar · View at Scopus
  17. F. Leng, N. Feng, and X. Lu, “An experiment study on the properties of resistance to diffusion of chloride ions of fly ash and blast furnace slag concrete,” Cement and Concrete Research, vol. 30, no. 6, pp. 989–992, 2000. View at Publisher · View at Google Scholar · View at Scopus
  18. American Concrete Institute, Guide for the Use of Polymers in Concrete, ACI Committee 548, Detroit, MI, USA, 1997.
  19. ASTM C39, Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, American Society for Testing and Materials, Philadelphia, PA, USA, 2015.
  20. ASTM C 78/C78M, Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading), American Society for Testing and Materials, Philadelphia, PA, USA, 2015.
  21. ASTM C 1202–94, Standard Test Method for Electrical Indication of Concrete’s Ability to Resist Chloride Ion Penetration, American Society for Testing and Materials, Philadelphia, PA, USA, 1997.
  22. American Concrete Institute, State-of-the-Art Report on Fiber Reinforced Concrete, ACI Committee 544, Detroit, MI, USA, 2002.
  23. ASTM C 944, Standard Test Method for Abrasion Resistance of Concrete or Mortar Surfaces by the Rotating-Cutter Method, American Society for Testing and Materials, 2005.