Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2018, Article ID 2314794, 5 pages
https://doi.org/10.1155/2018/2314794
Research Article

One-Step Synthesis of Conductive BNC/PPy·CuCl2 Hybrid Flexible Nanocomposites by In Situ Polymerization

1Graduate Program of Materials Science and Engineering (PGMAT), Federal University of Santa Catarina (UFSC), 88040-900 Florianópolis, Brazil
2Laboratory of Electrical Materials (LAMATE), Federal University of Santa Catarina (UFSC), 88040-900 Florianópolis, Brazil
3Department of Electrical and Electronic Engineering (EEL), Federal University of Santa Catarina (UFSC), 88040-900 Florianópolis, Brazil
4Department of Chemical and Food Engineering (EQA), Federal University of Santa Catarina (UFSC), 88040-900 Florianópolis, Brazil

Correspondence should be addressed to Carlos R. Rambo; rb.csfu@obmar.solrac

Received 30 May 2018; Revised 23 August 2018; Accepted 29 August 2018; Published 23 September 2018

Academic Editor: Zhiping Luo

Copyright © 2018 Daliana Müller et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Daliana Müller, Bruno N. Wesling, Gabriella M.V. Dias, et al., “One-Step Synthesis of Conductive BNC/PPy·CuCl2 Hybrid Flexible Nanocomposites by In Situ Polymerization,” Advances in Materials Science and Engineering, vol. 2018, Article ID 2314794, 5 pages, 2018. https://doi.org/10.1155/2018/2314794.