Influence of Processing Parameters on Laser Direct Joining of CFRTP and Stainless Steel

<table class="table-group" id="tab1"><tr><td><table class="table"><tr><td class="thead-hr" colspan="8"><hr/></td></tr><tr class="thead"><td class="align_left">C</td><td class="align_center">Si</td><td class="align_center">Mn</td><td class="align_center">Cr</td><td class="align_center">Ni</td><td class="align_center">S</td><td class="align_center">P</td><td class="align_center">Fe</td></tr><tr><td class="thead-hr" colspan="8"><hr/></td></tr><tr><td class="align_left">0.07</td><td class="align_center">0.56</td><td class="align_center">0.78</td><td class="align_center">18.33</td><td class="align_center">8.10</td><td class="align_center">0.006</td><td class="align_center">0.032</td><td class="align_center">Balanced</td></tr><tr class="table-tr"><td colspan="8"><hr class="tbody-hr"/></td></tr></table></td></tr></table>

<div>The chemical composition of the 304 stainless steel (wt.%).</div>

Advances in Materials Science and Engineering

tab1

Table 1

Table 1: Influence of Processing Parameters on Laser Direct Joining of CFRTP and Stainless Steel 