Research Article
Influence of Processing Parameters on Laser Direct Joining of CFRTP and Stainless Steel
Table 2
The detailed processing parameters of laser joining stainless steel and CFRTP.
| Sample | Laser power (W) | Laser scanning speed (mm/s) | Clamping pressure (MPa) | Thickness of PPS (μm) |
| A1 | 290 | 5 | 0.5 | 300 | A2 | 320 | 5 | 0.5 | 300 | A3 | 350 | 5 | 0.5 | 300 | A4 | 380 | 5 | 0.5 | 300 | A5 | 410 | 5 | 0.5 | 300 | B1 | 320 | 3 | 0.5 | 300 | B2 | 320 | 4 | 0.5 | 300 | B3 | 320 | 5 | 0.5 | 300 | B4 | 320 | 6 | 0.5 | 300 | B5 | 320 | 7 | 0.5 | 300 | C1 | 320 | 5 | 0.5 | 300 | C2 | 320 | 5 | 0.6 | 300 | C3 | 320 | 5 | 0.7 | 300 | C4 | 320 | 5 | 0.8 | 300 | C5 | 320 | 5 | 0.9 | 300 | D1 | 320 | 5 | 0.5 | 0 | D2 | 320 | 5 | 0.5 | 150 | D3 | 320 | 5 | 0.5 | 300 | D4 | 320 | 5 | 0.5 | 450 |
|
|