Advances in Materials Science and Engineering / 2018 / Article / Fig 6

Research Article

Taguchi Robust Design for Optimizing Surface Roughness of Turned AISI 1045 Steel Considering the Tool Nose Radius and Coolant as Noise Factors

Figure 6

Screenshots from surface roughness tester for optimum machining conditions at each noise factors combination as shown in Table 7. (a) Test run-1; (b) test run-2; (c) test run-3; (d) test run-4.
(a)
(b)
(c)
(d)

Article of the Year Award: Outstanding research contributions of 2020, as selected by our Chief Editors. Read the winning articles.