Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2018, Article ID 2635084, 9 pages
https://doi.org/10.1155/2018/2635084
Research Article

Optimization of Process Parameters for Vertical-Faced Polypropylene Bottle Injection Molding

School of Mechanical and Automotive Engineering, Anhui Polytechnic University, Wuhu, China

Correspondence should be addressed to Zhichao Yan; moc.qq@2188708411

Received 3 March 2018; Revised 22 April 2018; Accepted 30 April 2018; Published 3 June 2018

Academic Editor: Marco Cannas

Copyright © 2018 Youmin Wang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Youmin Wang, Zhichao Yan, and Xuejun Shan, “Optimization of Process Parameters for Vertical-Faced Polypropylene Bottle Injection Molding,” Advances in Materials Science and Engineering, vol. 2018, Article ID 2635084, 9 pages, 2018. https://doi.org/10.1155/2018/2635084.